• 한국의류학회지
• /
• 제38권5호
• /
• pp.665-674
• /
• 2014

An analysis of the components of clay mineral before and after coloration (XRF) showed that the elements involved in coloration are Fe, Cr, and Ni. Fe accounts for 65% of coloring components on dyed fabric; in addition, Cr and Ni also affect coloring. The optimal coloration condition was to repeat the process of immersing the cotton fabric in $80^{\circ}C$ slurry of 8g of clay mineral to 1g cotton for 60 minutes, dry it for 24 hours and rinse three times. Especially, as the repetition of coloration increased, the $(K/S)_{440}$ value of sample A increased from 1.0 to 2.5, and sample B increased from 1.0 to 1.6. The effect of the repeated process on coloration was significant; consequently, the rinsing and drying process were important to decrease the coloration level. It also showed excellent results in regard to color fastness to washing, light, rubbing, perspiration, and antibiotic effect.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.75-81
• /
• 2013

Colorimetric and wash fastness data after repeated wash cycles of Poly Lactic Acid(PLA) fiber were examined with C. I. Vat Blue 1, also other comparing 2 dyes (C. I. Vat Blue 35, C. I. Vat Blue 5), in this study. The fastness of three vat dyes on PLA fiber to repeated washing according to KS K 0430 A-2 regulation increased with dyeing temperatures. The $L^*$ values of the dyed material gradually increased with increasing numbers of wash. Also the f(k) values were decreased reversely. During repeated washing, the vagrant dyes were deposited especially on nylon, polyester, cotton of the adjacent multifiber. C. I. Vat Blue 5 displayed lowest color change to repeated washing of the three dyes used.

• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.215-222
• /
• 2013

The purpose of this study is to minimize fading fabrics of surgical gown by repeated severe laundering and sterilization condition. The study showed that the best conditions were reduction cleaning using sulphinic acid derivatives or glucose organic chemicals at $98^{\circ}C$ alkaline solutions. In these conditions, color difference values(dE) were below 1.0 that means unrecognizable color change by repeated laundering and sterilization. If it treated with only laundering, reduction cleaning conditions may adjust over $80^{\circ}C$ alkaline solution. In conclusion, it is needed to select the high-washing fastness dye and reduction cleaning using sulphinic acid derivatives or glucose organic chemicals at $98^{\circ}C$ alkaline solutions for removal unfixed dyes.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.257-262
• /
• 2011

The dish cloth requires antimicrobial activity for hygienic purpose. Until now, organic antimicrobial agents of low cost have been frequently used for the anitimicrobial finishing. However, a cleaner hving anitimicroial activity should be more durable considering consumers' ever-increasing expectation. In this study, the cleaner containing the bamboo fiber were finished with a formulation of a new zirconium-containing inorganic agent of zirconium phosphate and polyurethane binders. The optimum treatment condition was investigated. And its durability against repeated laundering cycles was assessed. The existence of Zr after the repeated laundering was verified and the antimicrobial effect did not decrease under 30 washing cycles.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.359-366
• /
• 2001

In this study, wool, silk and cotton fabrics were dyed with natural dyes derived from Ginkgo biloba bark using various mordants, and their dyeabilities were discussed. Additionally the fastness to washing, perspiration, light, rubbing, and drycleaning were investigated. And the effects of bacteria reduction and UV-B protection rate were also checked. The optimum dyeing condition of the colorants extracted from the Ginkgo biloba bark was three repeated dyeing at$95^\circ{C}$ for 1 hr. by using post mordanting. Mordanting improved the fastness to washing, Perspiration and drycleaning, but the fastness to light and rubbing were not increased. The bacteria reduction rate of the wool fabric increased drastically by dyeing with extract of Ginkgo biloba bark and its effect maintained after repeated washing and drycleaning. UV-B protection rate of the natural fibers increased by dyeing with extract of Ginkgo biloba bark and the dyed wool fabric was the best of the three fabrics.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.1-1
• /
• 2001

In this study, wool, silk and cotton fabrics were dyed with natural dyes derived from Ginkgo biloba bark using various mordants, and their dyeabilities were discussed. Additionally the fastness to washing, perspiration, light, rubbing, and drycleaning were investigated. And the effects of bacteria reduction and UV-B protection rate were also checked. The optimum dyeing condition of the colorants extracted from the Ginkgo biloba bark was three repeated dyeing at 95℃ for 1 hr. by using post mordanting. Mordanting improved the fastness to washing, Perspiration and drycleaning, but the fastness to light and rubbing were not increased. The bacteria reduction rate of the wool fabric increased drastically by dyeing with extract of Ginkgo biloba bark and its effect maintained after repeated washing and drycleaning. UV-B protection rate of the natural fibers increased by dyeing with extract of Ginkgo biloba bark and the dyed wool fabric was the best of the three fabrics.

• 한국염색가공학회지
• /
• 제12권4호
• /
• pp.239-247
• /
• 2000

The coloring matter was extracted from the heartwood of Amur cork tree by distilled water. Change of UV-Visible spectra of coloring matter solution by extraction condition and stability for irradiation were determined, and the effect of repeated dyeing with condition of dyebath and mordanting method on shade depth and lightfastness were also investigated. The results are as follows : 1) Absorbance of Amur cork tree extract increased with the lapse of extraction time. λmax of color solution extracted from Amur cork tree was found at 420, 333, and 262nm. 2) Absorbance of Amur cork tree extract decreased remarkably after 2hr irradiation. 3) The K/S of silk fabrics increased with the increase of dyeing temperature, time, amounts of Amur cork tree for extraction, and pH of color solution. 4) K/S of silk fabrics dyed by repeated dyeing method was affected by pH and concentration of color solution. 5) Lightfastness of silk twice dyed with Amur cork tree extract after pre-mordanted by 8%(o.w.f) chromium acetate was moderately improved.

• 한국염색가공학회지
• /
• 제11권3호
• /
• pp.23-31
• /
• 1999

In order to investigate the detergency of the mixture of compact detergent and bleaching agent to fabric stained with a coffee and a red wine, respectively, and a japanese wet stained fabrics, to evaluation of detergency was studied under various washing conditions. In order to study the effect of alkaline agent addition on the detergency, the soda ash was added in the compact detergent system. The results are as follows : In a low temperature washing condition, the alkalinity of washing liquor effected more the removal of the composite stained fabrics than that of oilic stained fabrics. For the colored stained fabric such as red wine stained sample, the influence of the repeated washing treatment on the detergency was not significant factor. On the other hand, the influence of the repeated washing treatment for the coffee stained and japanese wet stained fabric on the detergency was gradually increased.

• 한국염색가공학회지
• /
• 제21권6호
• /
• pp.29-38
• /
• 2009

Natural dyes seem to be more profitable on human and environment, and recently they could be considered as a better alternative to synthesized dyes. The aim of the current work was to investigate the dyeing property and antimicrobial activity of commercial cotton fabrics dyed with kumazasa (usually called in japan) which is known as conventional japan bamboo leaves. Actually, the dyeability and antimicrobial property of dyed fabric with natural mordant/dyeing was compared with synthetic mordant/dye process. The results of this study obtained are as follows. The apparently colour of kumazasa leaves extract dyed fabrics showed with light green or slightly yellow-green. In colorfastness to washing, ${\Delta}E$ and K/S values of dyed fabrics with natural chitosan as mordant used was shown to be more excellent results, than was synthetic mordant used. However, the decrease rate was recorded nearly 50% when washing repeated 20 cycles. In result of antimicrobial effect for bacteria, the dyed fabrics didn't show the significant antimicrobial activity to the both dyed with and without mordant. Results of this investigation considered that low-cost, natural, bio-mordant are relatively effective in natural coloration.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.26-34
• /
• 2008

Wool fabric having high moisture content were treated with fluorocarbon-based water and oil repellent finishing agents by pad-dry-cure system. Three types of finishing agents which were regular-type or nano-type were adapted to compare the surface chemical composition, water and oil repellent property, crease recovery angle, and durability to repeated laundering. From the surface chemical compositions resulted by ESCA and C1s curve-fitting, it was shown that the regular-type finishing agent were easily taken off from the finished wool fabrics after repeated laundering. On the other hand, the fluoroalkyl groups of nano-type finishing agents turned round from fabric surface to fiber internal after repeated laundering. The water repellency of the wool fabrics treated with regular-type agent had a little changes according to the treatment condition changes and sharply decreased with repeated laundering. However, these values when treated with nano-type agents increased with the concentration and cure temperature and were maintained after 20 times laundering. The wool fabrics treated with nano-type agent had a great oil repellency irrespective of treatment conditions. Furthermore, the wrinkle recovery values of the wool fabrics treated with nano-type agents were higher than those of the fabrics treated with regular-type agent and were unchanged after 20 times laundering.