• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.525-531
• /
• 2007

The operating temperature has been increased to improve the efficiency of gas turbine. The most advanced Gas turbine is operated at above $1,500^{\circ}C$. Improvement in material and cooling method permit hot gas path component to run at increased temperature. But, the repair of blades which are developed with advanced manufacture technique is difficult to use normal welding. Most of gas turbine blades are made of precipitation harden nickel base superalloy, which is very hard to weld. Therefore, the employment of welding filler on blade is solid solution nickel base superalloy(Hastelloy X, Inconel 617). In this study, Tensile test in high temperature was conducted on welded GTD111DS with GTD111 to evaluate effect of variation of pre, post treatment. The result of this study showed that the specimen was treated with optimum pre and post treatment(preweld HT($1200^{\circ}C$), Post treatment($1100^{\circ}C$ HIP, $1200^{\circ}C$ + $1100^{\circ}C$ + $800^{\circ}C$ HT) is mush superior.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권5호
• /
• pp.422-428
• /
• 2007

The columella, nasal tip, lip relationship in the secondary bilateral cleft deformity remains an enigma and a great challenge for the cleft surgeon. A subset of patients with bilateral cleft lip still require columellar lengthening and nasal correction, despite the advances in preoperative orthopedics and primary nasal corrections. An approach to correct this deformity is described. This consists of 1) lengthening the columella, 2) open rhinoplasty, allowing definitive repositioning of lower lateral cartilages, ear cartilage grafting to the tip and columella when necessary, 3) nasal mucosal advancement, 4) alar base narrowing and 5) reconstruction of the orbicularis oris as required. In surgical repair of the cleft lip nose, the timing of the operation(during lip closure, before or after the puberty growth sput), and the operative technique play a key role in the final result. In this study, 13 cleft lip patients who had undergone a secondary cheilorhinoplasty at the Department of Oral and Maxillofacial Surgery, Pusan National University Hospital were evaluated to check the proper time and method of the operation.

• 한국컴퓨터정보학회논문지
• /
• 제19권5호
• /
• pp.53-60
• /
• 2014

최근 IT 기술의 급속한 발전으로 시설물의 설비진단과 관련된 융합 기술의 발전이 가속화되어 가고 있으며, 설계에서 유지, 보수 단계에 이르는 모든 관련 정보를 효율적으로 처리하고 관리할 수 있는 기법에 대한 연구가 요구되고 있다. 본 논문에서는 IT융합기술을 기반으로 설비 진단 및 시설물에 대한 복합정보를 효율적으로 처리하는 처리기법을 제안하고 실시간 복합정보 관리시스템을 설계하였다. 제안된 시스템의 성능을 평가하기 위해 특정 시설물을 대상으로 실시간 관리시스템을 설계하였으며, 결과를 분석하여 제안된 기법의 성능이 우수함을 입증하였다.

• Clinical and Experimental Reproductive Medicine
• /
• 제47권2호
• /
• pp.94-100
• /
• 2020

The inverse correlation between maternal age and pregnancy rate represents a major challenge for reproductive endocrinology. The high embryo ploidy error rate in failed in vitro fertilization (IVF) cycles reflects genetic misfires accumulated by older oocytes over time. Despite the application of different follicular recruitment protocols during IVF, gonadotropin modifications are generally futile in addressing such damage. Even when additional oocytes are retrieved, quality is frequently poor. Older oocytes with serious cytoplasmic and/or chromosomal errors are often harvested from poorly perfused follicles, and ovarian vascularity and follicular oxygenation impact embryonic chromosomal competency. Because stimulation regimens exert their effects briefly and immediately before ovulation, gonadotropins alone are an ineffective antidote to long-term hypoxic pathology. In contrast, the tissue repair properties (and particularly the angiogenic effects) of platelet-rich plasma (PRP) are well known, with applications in other clinical contexts. Injection of conventional PRP and/or its components (e.g., isolated platelet-derived growth factors as a cell-free substrate) into ovarian tissue prior to IVF has been reported to improve reproductive outcomes. Any derivative neovascularity may modulate oocyte competence by increasing cellular oxygenation and/or lowering concentrations of intraovarian reactive oxygen species. We propose a mechanism to support intrastromal angiogenesis, improved follicular perfusion, and, crucially, embryo ploidy rescue. This last effect may be explained by mRNA upregulation coordinated by PRP-associated molecular signaling, as in other tissue systems. Additionally, we outline an intraovarian injection technique for platelet-derived growth factors and present this method to help minimize reliance on donor oocytes and conventional hormone replacement therapy.

• Structural Engineering and Mechanics
• /
• 제30권4호
• /
• pp.403-426
• /
• 2008

Externally bonding fiber reinforced polymer (FRP) sheets with an epoxy resin is an effective technique for strengthening and repairing reinforced concrete (RC) beams under flexural loads. Their resistance to electro-chemical corrosion, high strength-to-weight ratio, larger creep strain, fatigue resistance, and nonmagnetic and nonmetallic properties make carbon fiber reinforced polymer (CFRP) composites a viable alternative to bonding of steel plates in repair and rehabilitation of RC structures. The objective of this investigation is to study the effectiveness of CFRP sheets on ductility and flexural strength of reinforced high strength concrete (HSC) beams. This objective is achieved by conducting the following tasks: (1) flexural four-point testing of reinforced HSC beams strengthened with different amounts of cross-ply of CFRP sheets with different amount of tensile reinforcement up to failure; (2) calculating the effect of different layouts of CFRP sheets on the flexural strength; (3) Evaluating the failure modes; (4) developing an analytical procedure based on compatibility of deformations and equilibrium of forces to calculate the flexural strength of reinforced HSC beams strengthened with CFRP composites; and (5) comparing the analytical calculations with experimental results.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.814-823
• /
• 2012

Electric power transmission utilities make an effort to maximize profit by reducing their electricity supply and operation costs while maintaining their reliability. The development of maintenance strategies for aged components is one of the more effective ways to achieve this goal. The reliability centered approach is a key method in providing optimal maintenance strategies. It considers the tradeoffs between the upfront maintenance costs and the potential costs incurred by reliability losses. This paper discusses the application of the Particle Swarm Optimization (PSO) technique used to find the optimal maintenance strategy for a transmission component in order to achieve the minimum total expected cost composed of Generation Cost (GC), Maintenance Cost (MC), Repair Cost (RC) and Outage Cost (OC). Three components of a transmission system are considered: overhead lines, underground cables and insulators are considered. In regards to aged and aging component, a component state model that uses a modified Markov chain is proposed. A simulation has been performed on an IEEE 9-bus system. The results from this simulation are quite encouraging, and then the proposed approach will be useful in practical maintenance scheduling.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.129-133
• /
• 2006

In China, the traditional method of artificial and periodical cruise is still adopted for the AtoN management, which has brought many disadvantages to the work of the AtoN management, such as non real-time, fallibility, and low efficiency However, with the rapid development of AIS technique, now AIS equipments have been widely installed on ships, and on the other hand China Maritime Safety Administration (abr. China MSA) is carrying out the scheme of AIS base station network in china, based on which the digital AtoN will develop in the future. According to what have been analyzed above, this paper puts forward a design of AtoN wireless surveillance system based on AIS. The system consists of AIS on AtoN, AIS base station and AtoN management center. It can provide such functions as the information gathering, managing of AtoN and the service of navigation assistance. This paper gives the whole design including the work theory, the hardware structure and the software scheme of the system, and finally gives the simulation software of the AtoN management center. The AtoN wireless surveillance system brought forward by this paper will be more efficient with less repair cost and less work of the supervisors. It will bring revolutionary progress in the navigation aids system in China.

• Clinics in Shoulder and Elbow
• /
• 제12권1호
• /
• pp.76-79
• /
• 2009

목적: 견관절 전방 외상성 불안정증에서 관절 낭-순 재건술은 재발성 불완정증 예방 및 기능 회복에 있어 매우 성공적인 술식이다. 대상 및 방법: 그러나 관절 와의 30 % 이상의 심한 골 결손이 존재 할 때 관절 낭-순 재건술 만으로는 성공적인 결과를 가져오기 힘들다. 결과: 본 연구는 관절 와의 심한 골 결손을 가진 재발성 전방 외상성 불안정성 견관절에서 관절외자가 장골 이식으로 보강한 관절 낭-순 재건술의 술기와 결과를 보고하고자 한다.

• 한국정보통신학회논문지
• /
• 제6권5호
• /
• pp.661-666
• /
• 2002

인터넷의 대중화와 함께 데이터 통신서비스에 대한 수요로 데이터 통신망은 그 양과 종류가 급격하게 증가하고 있어서 통신망 운용에 따른 망구성 및 고장처리 체계의 정립이 필요하게 되었다. 기존의 다양한 유형의 데이터 통신망서비스 고장처리방법의 통합하면서 새로운 차세대 통신망서비스 고장처리방안까지 수용할 수 있도록 하는 통합 고장처리시스템의 개발이 필요하다. 본 논문에서는 모든 데이터 통신망서비스에 대한 고장시험, 고객정보관리, 시선정보관리에 관련된 시스템들과의 체계적인 연동을 통한 통합 고장처리 방안을 제시하고 UML(Unified Modeling Language)과 EJB(Enterprise Java Bean) 기술을 이용한 객체지향방법에 기반한 설계를 수행한다.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.366-372
• /
• 2001

The ice plugging process consists of placing liquid nitrogen around a pipe and removing heat until the water in the pipe freezes and provides a solid plug or seal against fluid movement. This technique enables us to repair or inspect a pipe system without shutdown of entire system. A set of test apparatus for investigation of the liquid freezing phenomena during ice plugging is prepared. This study shows the characteristics of the liquid freezing and the heat transfer with various pipe and freezing jacket conditions. And in case there is flow of the fluid inside the pipe, the flow rate which can be able to form the ice plug is identified with the effect of the pipe diameter and freezing jacket length on the plug formation. The permissible maximum flow rate for the complete plug formation is approximately proportional to the freezing jacket length at the same pipe diameter condition.