• Journal of the Korean GEO-environmental Society
• /
• v.16 no.7
• /
• pp.35-42
• /
• 2015

Grouting method has been widely used for the ground improvement and stabilization: mostly to block or control the ground water in the early years and to improve the ground, repair the structure in recent years, ever increasing its use. Despite many advantages so far, the existing grouting method also has some shortcomings including uncertain permeation of grouting with gravity type if the voids between the soil particles are narrow, and problems due to the relaxation of the neighboring ground when injected using injection pressure. As an alternative, a vibration injection method with constant amplitude and frequency has been developed in recent years, with the vibration grouting being reported to have a permeability increasing effect of grout material compared with the positive pressure injection type. Accordingly, the purpose of this study is to investigate the improvement effect of the vibration grouting that applies short-period vibration energy by varying vibration cycle, vibration time and ground conditions to evaluate the strength enhancing effect of grouting materials, expansion effect of grouting body, ground improvement effect of the grouting and the penetration characteristics of the rock joint. The findings of this study show the improved compressive strength of grout, expansion of grouting body and increased penetration rate, according to the vibration compared with non-vibration under the loose soil condition.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.5
• /
• pp.35-42
• /
• 2014

Thermal analysis properties and adhesive properties of self-healing agents were evaluated through differential scanning calorimetry, reaction heat measurement, and adhesive shear test. D1E0, D3E1, D1E1, D1E3, and D0E1, depending on the mixing ratio of DCPD and ENB, were considered as self-healing agents. The amount of Grubbs' catalyst, depending on the type of self-healing agents, was varied from 0.1 wt% to 1.5 wt%. In the case of DCPD, the polymerization reaction occurred faster and the stabilized adhesive strength increased as the amount of catalyst increased; however, a large amount of catalyst was required. ENB had excellent reactivity with a small amount of the catalyst; however, high reaction heat was observed at the early stage of polymerization. Thermal analysis properties and adhesive properties of self-healing agents can be controlled by varying a mixing ratio of DCPD and ENB. Among the self-healing agents used for this study, the D3E1 would be one of the most preferable candidates with regard to maximum adhesive strength, reaching time to maximum adhesive strength, stabilized adhesive strength, and reaction heat.

• Journal of Life Science
• /
• v.29 no.3
• /
• pp.382-393
• /
• 2019

Wound care is a health industry concern affecting millions worldwide. Recent increase in metabolic disorders such as diabetes comes with elevated risk of wound-based complications. Treatment and management of wounds are difficult practices due to complexity of the wound healing process. Conventional wound dressings and treatment applications only provide limited benefits which are mainly aimed to keep wound protected from external factors. To improve wound care, recent developments make biopolymers to be of high interest and importance to researchers and medical practitioners. Biopolymers are polymers or natural origin produced by living organisms. They are credited to be highly biocompatible and biodegradable. Currently, studies reported biopolymers to exhibit various health beneficial properties such as antimicrobial, anti-inflammatory, hemostatic, cell proliferative and angiogenic activities which are crucial for effective wound management. Several biopolymers, namely chitosan, cellulose, collagen, hyaluronic acid and alginic acid have been already investigated and applied as wound dressing agents. Different derivatives of biopolymers have also been developed by cross-linking with other molecules, grafting with other polymers, and loading with bioactive agents or drugs which showed promising results towards wound healing without any undesired outcome such as scarring and physiological abnormalities. In this review, current applications of common biopolymers in wound treatment industry are highlighted to be a guide for further applications and studies.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.4
• /
• pp.114-125
• /
• 2012

The purpose of this study is to analysis chromaticity, granulometry, main chemical composition and mineral crystal structure of wall soils excavated from Poongnatoseong Earthen Castle using color reader, XRD, particla size analyzer. The analysed soils of Poongnatoseong Earthen Castle were yellowish brown and isabella. All samples were sands or sands including silty soil(SW~SC) and showed similar granulometry, chemical composition and mineral crystal structure, which were characteristics of construction materials suitable for modern road or airstrip. As resulting in comparison with 4 factors from chromaticity, granulometry, main chemical composition and mineral crystal structure, we decided that the control soils(PNS) near by Poongnatoseong Earthen Castle were not to be used for the castle wall construction We presumed that there was a huge soil distribution area for the wall construction around Poongnatoseong Earthen Castle. For further study, we will make a comparison analysis all kinds of soil characteristics. And then we can understand correctly about wall soils producing area, construction method, repair method and time of Poongnatoseong Earthen Castle.

• Clinics in Shoulder and Elbow
• /
• v.24 no.1
• /
• pp.21-26
• /
• 2021

Background: To evaluate the demographics, clinical and radiographic features of calcific tendinitis of the shoulder in the Korean population, specifically focusing on the incidence of coexisting rotator cuff tear. Methods: Between October 2014 and January 2015, we performed a prospective multicenter study with 506 patients from 11 training hospitals in Korea. We collected data of demographics and radiographic analysis based on simple radiographs, clinical assessments based on visual analog scale (VAS) and the American Shoulder Elbow Surgeons (ASES) score, and treatment modalities that are used currently. We also evaluated coexisting rotator cuff tear by ultrasonography (US) or magnetic resonance imaging (MRI) images. Results: There were 402 female patients (79%) with mean age of 55 years (range, 31-87 years). Mean duration of symptoms was 16 months. Mean size of calcific materials was 11.4 mm (range, 0-35 mm). Mean value of VAS and ASES scores were 6.5 (range, 1-10) and 47 (range, 8-95), respectively. Of 383 patients (76%), 59 (15%) had rotator cuff tear including 15 full-thickness tears on US or MRI. Patients with rotator cuff tears were significantly associated with older age, recurrent symptoms, menstrual disorders in females, and having undergone calcification removal surgery and rotator cuff repair (all p<0.05). Conclusions: This study reported demographic, radiographic, and clinical features of calcific tendinitis of the shoulder in Korean population, which were not different from those of Western population. Coexisting rotator cuff tear was found with 15% incidence in this large series, suggesting that further radiographic study to evaluate rotator cuff tear might be needed in some calcific tendinitis patients of older age and presenting with recurrent symptoms.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.1
• /
• pp.19-26
• /
• 2021

Cultural assets excavated in historical areas have their own characteristics based on the background of the times, and it can be seen that their patterns and characteristics change little by little according to the history and the flow of the spreading area. Cultural properties excavated in some areas represent the culture of the time and some maintain their intact appearance, but most of them are damaged/lost or divided into parts, and many experts are mobilized to research the composition and repair the damaged parts. The purpose of this research is to learn patterns and characteristics of the past through artificial intelligence neural networks for such restoration research, and to restore the lost parts of the excavated cultural assets based on Generative Adversarial Network(GAN)[1]. The research is a process in which the rest of the damaged/lost parts are restored based on some of the cultural assets excavated based on the GAN. To recover some parts of dammed of cultural asset, through training with the 2D image of a complete cultural asset. This research is focused on how much recovered not only damaged parts but also reproduce colors and materials. Finally, through adopted this trained neural network to real damaged cultural, confirmed area of recovered area and limitation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.737-744
• /
• 2021

Spray paving minimizes material lost during the construction or repair of a road surface, and it can be done in conjunction with tack coating. This approach involves applying the asphalt mixture at the same time as spraying the tack coat by attaching a spraying device to the asphalt paver. When applying an asphalt overlay to an aged concrete surface, it is important to ensure the adhesion performance between different material properties. Accordingly, there is a need for a tack coat that can be applied by spray paving and that exhibits good adhesive performance on different materials. In this study, bonding strength tests under various conditions were performed to evaluate the basic performance of a tack coat developed for use with a spray paver. The bonding performance of the tack coat was observed to be affected by curing conditions and material lost during construction. The test results also showed that the tensile and shear bonding strengths of the developed tack coat were 1.21 and 1.99 times higher than those of a conventional one, respectively. As a result, the developed tack coat is considered suitable for application to spray paving.

• Journal of Korean Foot and Ankle Society
• /
• v.26 no.2
• /
• pp.88-94
• /
• 2022

Purpose: This study was based on the Korean Foot and Ankle Society (KFAS) member survey and aimed to report the current trends in the epidemiology, diagnosis, and management of acute Achilles tendon rupture (AATR) over the past few decades. Materials and Methods: A web-based questionnaire containing 34 questions was sent to all KFAS members in October 2021. The questions were mainly related to the clinical experience and preferred management of patients with AATR. Answers with a prevalence ≥50% of the respondents were considered a tendency. Results: Seventy-one (12.9%) of the 550 members responded to the survey. The male sex ratio in AATR was answered mean 78%, and the most common age groups were 30~40 years (n=49; 69.0%), and 40~50 years (n=37; 52.1%), in that order. The most common seasons for the occurrence of AATR were spring (37 cases; 52.1%) and autumn (27 cases; 38.0%). Also, sports-related rupture had an average occurrence of 76.2%. The most important clinical factor to determine the type of treatment was the history of previous injuries, and 75.9% of respondents started conservative treatment in the 2010s. The most preferred protocol of conservative treatment was an orthosis capable of ankle range of motion after casting (68.5%), and 53.7% 'satisfied' and 1.9% 'very satisfied' with conservative treatment. The most preferred surgical method was open repair (80.3%), and the Krackow method (60.6%), and 49.3% of treated patients responded 'satisfied' and 45.1% 'very satisfied' with this treatment. Conclusion: This study gives updated information concerning the current trend of epidemiology, diagnosis, and treatment of AATR in Korea. Both consensus and variation in the approach to AATR were identified using this survey study. This study may raise the awareness of various possible approaches toward AATR and should be used to further establish a standard protocol for the management of this injury.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.482-488
• /
• 2022

In this study, the durability of ultra rapid hardening mortar for sewage pipe was evaluated by type of mortar binder. As a result of analyzing the internal structure for each type of mortar, it was confirmed that Al₂(OH)₃ was generated in the internal structure of the CAC-based mortar, and its corrosion resistance was superior to that of other types of mortar. As a result of the compressive strength test, OPC had the tsmallest strength, followed by CAC100 > CAC100P > CAC80. This trend was similar to the previous study results. Chloride ion penetration resistance and freeze-thaw test showed similar trends. That is, CAC and C12A7 were better than OPC, and CSA was worse than OPC. This is mostly beacuse of cracks caused by expansion of CSA-based mortar. CAC100P mix showed the best chemical resistance. It is thought that this is because the alumina gel formed inside the mortar and the polymer combine to make the internal structure more dense.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.289-298
• /
• 2023

In this study, the development of a self-healing concrete waterproofing agent was examined, focusing on its manufacturing and waterproofing properties. The optimal ratio using microcapsules for the concrete waterproofing agent was determined through assessments of flow, compressive strength, and permeability conducted during the mortar stage. These findings aimed to provide fundamental data for evaluating the self-healing properties of the concrete waterproofing agent designed for use in concrete structures. The self-healing concrete waterproofing agent was comprised of three types of inorganic materials commonly used for repair purposes. From experimental results, a composition ratio with a high potassium silicate content, referred to as SIM-2, was found suitable. A surfactant mixing ratio of 0.03 % was identified to enhance the dispersibility of the concrete waterproofing agent, while a mixing ratio of 0.2 % distilled water was deemed suitable for viscosity adjustment. For the magnetic self-healing concrete waterproofing agent's healing agent, using microcapsules in the range of 0.5 % to 0.7 % met the KS F 4949 and KS F 4926 standards.