• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2010년도 춘계학술발표회 논문집
• /
• pp.7-7
• /
• 2010

Flotation deinking is a common practice for removing ink from recovered paper, and it is becoming a key process in many recycling paper mills. Flotation deinking was successfully introduced to the paper recycling industry in the 1980s, and its applications in wax removal, stickies control, and fiber fractionation have attracted great research interest. A successful flotation process has three major efficient subprocesses: the detachment of the ink particles from the fibers, the effective adhesion of the ink particles onto air bubble surfaces, and the removal of froth and ink particles from flotation cells. Surfactants can affect these subprocesses either positively or negatively. To understand how a surfactant can positively and negatively affect the flotation deinking process, the basic chemistry of surfactant in solution should be discussed.

• 한국음향학회지
• /
• 제38권4호
• /
• pp.378-386
• /
• 2019

항해하는 선박으로부터 방사되는 선박소음과 달리 바람소음은 바람과 해수면의 상호작용으로 생성된 쇄파에 의해 발생한다. 본 논문에서는 바람의 소음원을 쇄파로 인해 발생되는 기포운으로 설정하여 바람소음준위를 모델링하였다. 모델링에서 바람소음의 음원준위는 동해 연안에서 운영되는 기상부이로부터 측정된 풍속 자료를 이용하여 계산하였다. 풍속을 측정함과 동시에 기상부이의 주변에 계류된 자가기록식 수중청음기를 이용하여 소음준위를 연속적으로 측정하였다. 측정된 수중소음에서 선박소음을 제거한 소음준위와 풍속에 따라 모델링된 바람소음준위를 저주파대역에서 비교하였다. 모델링된 바람소음준위와 측정된 소음준위의 전반적인 경향이 서로 유사하였다. 이에 따라 바람에 의해 발생된 소음원인 기포운의 음원준위 및 분포 수심을 고려하여 천해역에서 바람소음준위를 모델링하는 것이 가능함을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.619-624
• /
• 2001

A performance test facility for turbopump inducer cavitation was developed and the inducer cavitation performance tests were performed. Major components of the performance test facility are driving unit, test section, piping, water tank, and data acquisition and control system. The maximum of testing capability of this facility are as follows: flow rate - 30kg/s; pressure - 13 bar; rotational speed 10,000rpm. This cavitation test facility is characterized by the booster pump installed at the outlet of the pump that extends the flow rate range, and by the pressure control system that makes the line pressure down to vapor pressure. The vacuum pump is used for removing the dissolved air in the water as well as the line pressure. Performance tests were carried out and preliminary data of test model inducer were obtained. The cavitation performance test and cavitation bubble flow visualization were also made. This facility is originally designed for turbopump inducer performance test and cavitation test. However it can be applied to the pump impeller performance test in the future with little modification.

• 대한기계학회논문집B
• /
• 제27권2호
• /
• pp.188-196
• /
• 2003

Liquid-assisted cleaning technology utilizing a nanosecond laser pulse is effective for removing submicron particulates from a variety of solid substrates. In the technique, saturated vapor is condensed on a solid surface to form a thin liquid film and the film is evaporated explosively by laser heating. The present work studies the role of liquid-film evaporation in the cleaning process. First, optical interferometry is employed for in-situ monitoring the displacement of the laser-irradiated sample in the cleaning process. The experiments are performed for estimating the recoil force exerted on the target with and without liquid deposition. Secondly, time-resolved visualization and optical reflectance probing are also conducted for monitoring the phase-change kinetics and plume dynamics in vaporization of thin liquid layers. Discussions are made on the effect of liquid-film thickness and dynamics of plume and acoustic wave. The results confirm that cleaning force is generated when the bubble nuclei initially grow in the strongly superheated liquid.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.108-113
• /
• 1996

Several analytical models for the departure from nucleate boiling (DNB) phenomenon have been developed during the last decade. Among these, Chang & Lee's model based on a bubble crowding mechanism is remarkable in the fundamental features characterized as the formulation of mass, energy, and momentum balance equation at thermal-hydraulic conditions leading to the DNB. However, Bricard and Souyri remarked that the assumption of stagnant bubbly layer at the DNB condition is questionable and the signs on the axial projections of the momentum fluxes at the core/bubbly layer interface in the momentum balance equations are erroneous. From this remark, Chang & Lee's model has been re-examined and modified by correcting the erroneous treatments in the momentum balance equations and removing the spurious assumptions. The revised model predicts well the extensive DNB data of water in uniformly heated tubes at low qualities and shows more accurate prediction compared with the original model.

• 공학교육연구
• /
• 제19권2호
• /
• pp.26-33
• /
• 2016

A camp program where the theory of inventive problem solving TRIZ is applied to real problems of the industry was developed and taught at a five-day seminar apart from the standard curriculum at a university D in Gyeonggido. This study focuses on the educational effect that the TRIZ method has on the engineering students when their creative problem solving skills are required to solve industry problems on their own with the knowledge from their courses. For five days, the students were educated about TRIZ and assigned a real industry problem "Removal of friction caused by bubble formation in water heating pipelines". By applying TRIZ to the problem, the students developed an "Air removing Air Arrester" which received the evaluation, "with understanding the system architecture and the task objective causes and formation of the problem could be handled which directly helps the company's R&D". In this case, TRIZ offers the students a guideline and knowledge on how to approach problems and as a result the students provided a practical solution. During the process, the TRIZ method instilled confidence in the students and proved to be a motivation. It becomes obvious that this short-term program has a positive effect on students' way of thinking creatively and increasing their problem-solving abilities.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.88-89
• /
• 2015

In cold weather, the speed of concrete strength development is slow. As a result, construction speed becomes slow and it is problem for all construction site to solve this. So in this study, to shorten removing frame time after placing concrete, mix proportion using early-strength-binder(ESB) and curing method such as using heat line in concrete was considered. At first, concrete mix proportion was examined at -5℃ temperature between ordinary portland cement(OPC) and ESB. And second step, concrete, using mix proportion with OPC, was examined according to curing method(: 1) heat line used and 2) no heat line) and kinds of form (: 1) Deck slab, 2) Half PC slab and 3) SOG slab). All cases are same condition: slab thickness is 1,500mm, double-bubble sheet is used as a curing sheet after placing concrete. After the test, OPC is enough to get strength compared to ESB in special condition and 48~60 hours is needed according to form condition.

• 한국표면공학회지
• /
• 제54권1호
• /
• pp.1-11
• /
• 2021

Porous dendrite structure AuCu alloy was formed using a hydrogen bubble template (HBT) technique by electroplating to improve the catalytic performance of gold, known as an excellent oxygen reduction reaction (ORR) catalyst in alkaline medium. The rich Au surface was maximized by selectively electrochemical etching Cu on the AuCu dendrite surface well formed in a leaf shape. The catalytic activity is mainly due to the synergistic effect of Au and Cu existing on the surface and inside of the particle. Au helps desorption of OH- and Cu contributes to the activation of O2 molecule. Therefore, the porous AuCu dendrite alloy catalyst showed markedly improved catalytic activity compared to the monometallic system. The porous structure AuCu formed by the hydrogen bubble template was able to control the size of the pores according to the formation time and applied current. In addition, the Au-rich surface area increased by selectively removing Cu through electrochemical etching was measured using an electrochemical calculation method (ECSA). The results of this study suggest that the alloying of porous AuCu dendrites and selective Cu dissolution treatment induces an internal alloying effect and a large specific surface area to improve catalyst performance.

• 농업생명과학연구
• /
• 제45권3호
• /
• pp.81-88
• /
• 2011

본 연구에서는 딸기의 냉장 및 상온 저장 시 일반세균, pH, color, firmness 등의 품질특성에 있어 염수 세척에 따른 영향을 분석하였다. 시료는 세척하지 않은 대조구, 염수세척 시료구, 염수세척 후 물기제거한 시료구 세 가지 종류로 준비하였다. 일반세균의 경우 염수세척 후 물기제거한 경우에 염수세척 시료구와 비세척 대조구에 비해 세균수가 저감화되었으며, 대수증식기가 나타나지 않았다. pH의 경우, 비세척 대조구와 염수세척 시료구에서는 다소 감소했으나, 염수세척 후 물기를 제거한 시료구에서는 거의 변화가 없는 것으로 나타났다. 적색도는 비세척 대조구와 염수세척 후 물기제거 시료구에서 저장기간이 경과함에 따라 증가되었으나, 염수세척 시료구에서는 감소되었다. 경도의 경우 $4^{\circ}C$에서 저장했을 때, 저장 간에 큰 변화를 보이지 않았다. 결론적으로 딸기를 염수세척하여 물기를 제거할 경우, 저장기간을 크게 연장할 수 있을 것으로 사료된다.

• 한국환경과학회지
• /
• 제15권3호
• /
• pp.193-201
• /
• 2006

Advanced oxidation processes involving $O_3/H_2O_2$ and $O_3/catalyst$ were used to compare the degradability and the effect of pH on the oxidation of 1,4-dioxane, Oxidation processes were carried out in a bubble column reactor under different pH. Initial hydrogen peroxide concentration was 3.52 mM in $O_3/H_2O_2$ process and 115 g/L (0.65 wt.%) of activated carbon impregnated with palladium was packed in $O_3/catalyst$ column. 1,4-dioxane concentration was reduced steadily with reaction time in $O_3/H_2O_2$ oxidation process, however, in case of $O_3/catalyst$ process, about $50{\sim}75%$ of 1,4-dioxane was degraded only in 5 minutes after reaction. Overall reaction efficiency of $O_3/catalyst$ was also higher than that of $O_3/H_2O_2$ process. TOC and $COD_{cr}$ were analyzed in order to examine the oxidation characteristics with $O_3/H_2O_2\;and\;O_3/catalyst$ process. The results of $COD_{cr}$ removal efficiency and ${\Delta}TOC/{\Delta}ThOC$ ratio in $O_3/catalyst$ process gave that this process could more proceed the oxidation reaction than $O_3/H_2O_2$ oxidation process. Therefore, it was considered that $O_3/catalyst$ advanced oxidation process could be used as a effective oxidation process for removing non-degradable toxic organic materials.