• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.3
• /
• pp.11-24
• /
• 2024

Purpose : This study aims to identify the factors influencing health-related quality of life through machine learning of the general characteristics of patients with hypertension and to provide a basis for related research on patients, such as intervention strategies and management guidelines in the field of physical therapy for health promotion. Methods : Annual data from the second Korean Health Panel (Version 2.0) from 2019 to 2020, conducted jointly by the Korea Health and Social Research Institute and the National Health Insurance Service, were analyzed (Korea Health Panel, 2024). The data used in this study was collected from January to July 2020, and the data was collected using computer-assisted face-to-face interviews. Of the 13,530 household members surveyed, 1,368 were selected as the final study participants after removing missing values from 3,448 individuals diagnosed with hypertension by a doctor. Results : The results showed that walking (P2) was the most significant factor affecting health-related quality of life in random forest, followed by perceived stress (HS1), body mass index (BMIc), total household income (TOTc), subjective health status (SRHc), marital status (Marr), and education level (Edu). Conclusion :To prevent and manage chronic diseases such as hypertension, as well as to provide customized interventions for patients in advanced stages of the disease, research should be conducted in the field of physical therapy to identify influencing factors using machine learning. Based on the findings of this study, we believe that there is a need for additional content that can be utilized in the field of physical therapy to improve the health-related quality of life of patients with hypertension, such as diagnostic assessment and intervention management guidelines for hypertension, and education on perceived stress and subjective health status.

• International Journal of Railway
• /
• v.2 no.2
• /
• pp.43-49
• /
• 2009

Wear and rolling contact fatigue (RCF) defects are most important causes of rail damage, and often interaction competitive at present railway track. Head check is one of rolling contact fatigue (RCF) defects, and generally occurs in mild circular curves and transition curves that are set at both ends of sharp circular curves. Wear tends to limit the crack growth of head checks by removing the material from the RCF surface. In order to clarify the conditions of the occurrence and growth of head checks, the authors measured the interacting forces between wheels and rails and the angle of attack of wheelset, and carried out contact analyses using the actual profile data of wheels and rails. The effects of the lateral force, the contact geometry, and the wear rate at rail gauge comer on the formation of head checks were also analyzed by using the worn profiles of actual wheels and rails and the data obtained by a track inspection car. Some specific range of wear rate at the gauge comer was identified as having close relation with occurrence of head checks.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.7
• /
• pp.1125-1131
• /
• 2006

A kan'::luxCDABE fusion strain that was both highly bioluminescent and responsive to benzoic acid was constructed by transforming E. coli strain W3110 with the plasmid pUCDK, which was constructed by digesting and removing the 7-kb KpnI fragment from the promoterless luxCDABE plasmid pUCD615. Experiments using buffered media showed that this induction was dependent on the pH of the media, which influences the degree of benzoic acid protonation, and the expression levels seen are likely due to acidification of the cytoplasm by uncoupling of benzoic acid. Consequently, the sensitivity of this strain for benzoic acid was increased by nearly 20-fold when the pH was shifted from 8.0 to 6.5. Benzoic acid derivatives and several phenolics also resulted in significantly increased bioluminescent signals. Although these compounds are known to damage membranes and induce the heat-shock response within E. coli, bacterial strains harboring mutations in the fadR and rpoH genes, which are responsible for fatty acid biosynthesis during membrane stress and induction of the heat-shock response, respectively, showed that these mutations had no effect on the responses observed.

• The Journal of Pediatrics of Korean Medicine
• /
• v.15 no.2
• /
• pp.141-165
• /
• 2001

Attention-deficit/hyperactivity disorder(ADHD) is one of the most common childhood-onset psychlatric disorders. It is distinguished by symptoms of inattention, hyperactivity, and impulsivity. ADHD may be accompanied by learning disabilities, depression, anxiety, conduct disorder, and oppositional defiant disorder. The etiology of ADHD is unknown, and the disorder may have several different causes. Individual with ADHD present in childhood and may continue to show symptoms as they enter adolescence and adult life. Public interest in ADHD has increased along with debate in the media concerning the diagnostic process and treatment strategies. The purpose of this study is oriental medical approach to ADHD. This study was progressed for oriental diagnosis and treatment for ADHD. In oriental medicine, the reason of ADHD was deficiency of the kidney, hyperactivity of the liver(腎虛肝亢), deficiency of the heart and the spleen(心脾不足), heart disturbed by phlegm and heat(痰熱擾心). The method of medical treatment was nourishing the kidney and checking exuberance of yang(滋腎潛陽), relieving mental stress and promoting wisdom(寧神益智), nourishing the heart and strengthening the spleen(養心健脾), tranquilzation(安神定志). removing heat-phlegm(淸熱化痰), inducing resuscitation and tranquilzation(開窮安神). The prescription was commonly used as Liuwei Dihuang Wan jiajian(六味地黃丸加減), Guipi Tang he Ganmai Dazao Tang jiajian(歸脾湯合甘麥大棗湯加減), Huanglian Wendan Tang jiawei(溫黃連溫膽湯加味). It should help primary care providers in their assessment of a common child health problem.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.127-131
• /
• 2006

There are being a lot of studies for achievement of high speed Dehydration, high-strength and Lightweight of washing machine in the latest washing machine business. It is essential that Press-joining Strength of Spin Drum Seaming division is improved .to attain that target. Generally, we are using Mechanical press-joining by Seaming and T.I.G (Tungsten Inert Gas) welding among part joint method. Mechanical press-joining method that is mainly using for Stainless Steel (STS430) Drum have lots of merit that consumption of energy is low more than welding and production costs cut down and generation of the corrosion is solved by removing weld zone defect and materials having different properties are enable to join without special equipment. But, it is difficult to realize joint strength required at high speed operation because joint strength of mechanical press-joining method is low remarkably in comparison with welding. Also, there are a lot of analysis difficulties and very limited research is under way due to the dynamic factor such as multistage plastic working, elastic recovery, residual stress etc. The results of this study show optimal joining condition for mechanical press-joining by performing lots of tensile joining strength test with various specimen under multi-change of important design factor such as seaming width, bead area and bead depth etc.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.54-61
• /
• 2003

The first stage rotating blade of industrial gas turbine is one of the components that is normally run in exposed state at the highest temperature of the combustion gas stream. For this reason superior materials and advanced cooling technology are required to allow higher heat resisting characteristics of the component. The 1st stage blade of a selected commercial gas turbine blade made of directionally solidified Ni-based superalloy has a row of cooling holes on its trailing edge. In most cases, minor cracks have been found at some of the root cooling holes after one cycle operation (24,000 hrs) or even shorter operation time because of the high temperature gradient and the frequently alternating thermal stress. In the repair process, unfortunately, it is usually very difficult to get rid of the damage due to the fact that cracks are initiated at the root cooling hole and propagated deep into the hole. In this study, the feasibility of removing the sidewall cracks in the hole by utilizing EDM drilling has been investigated. Also the criteria of surface integrity for EDM drilling were established to achieve high quality repair as well as machining accuracy.

• Coupled systems mechanics
• /
• v.5 no.2
• /
• pp.127-144
• /
• 2016

Two dimensional numerical investigations were carried out to study the influence of interface thickness and their pattern on the behavior of reinforced concrete frames subjected to in-plane lateral loads using commercial finite element tool SAP 2000. The linear elastic analysis was carried out on one and two bay structural systems as well as the influence of number of stories was studied by varying the number of stories as single, three and five. The cement mortar was used as interface material and their effect was studied by varying thicknesses as 6, 8, 10, 14 and 20 mm. The interface was recognized as one sided, two sided, three sided and four sided and their effect was studied by removing the interface material between the reinforced concrete frame and masonry infill. The effect of lateral loads on infill masonry wall was also studied by varying assumed loads as 10, 20, 30, 40, 50 and 60 kN. The behavior of infilled frames studied has revealed that there is a maximum influence of interface thickness and interface pattern corresponding to 10 mm thickness. In general, the lateral displacement of frame is increased linearly with increase in lateral loads.

• Korean Journal of Materials Research
• /
• v.28 no.7
• /
• pp.376-380
• /
• 2018

Microalgae produce not only lipids for biodiesel production but also valuable biochemicals which are often accumulated under cellular stress mediated by certain chemicals. While the microcarriers for the application of drug delivery systems for animal cells are widely studied, their applications into microalgal research or biorefinery are rarely investigated. Here we develope dual-functional magnetic microcapsules which work not only as flocculants for microalgal harvesting but also potentially as microcarriers for the controlled release of target chemicals stimulating microalgae to enhance the accumulation of valuable chemicals. Magnetic microcapsules are synthesized by layer-by-layer(LbL) coating of PSS-PDDA on $Fe_3O_4$ nanoparticle-embedded $CaCO_3$ microparticles followed by removing $CaCO_3$ sacrificial templates. The positively charged magnetic microcapsules flocculate microalgae by electrostatic interaction which are sequentially collected by the magnetophoretic separation. The microcapsules with a polycationic outer layer provide efficient binding sites for negatively charged microalgae and by that means are further utilized as a chemical-delivery and flocculation system for microalgal research and biorefineries.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.4
• /
• pp.485-500
• /
• 2000

In this paper the adaptive crack propagation analysis based on the estimated local and global error in the element-free Galerkin (EFG) method is presented. It is possible to keep consistency and accuracy of analysis in each propagation step by adaptive analysis. The adaptivity analysis in crack propagation is achieved by adding and removing the node along the background integration cell that are refined or recovered as estimated error. These errors are obtained by calculating the difference between the values of the projected stresses and original EFG stresses. To evaluate the performance of proposed adaptive procedure, the convergence behavior is investigated lot several examples. The results of these examples show the efficiency of proposed scheme in crack propagation analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.2 s.146
• /
• pp.220-227
• /
• 2006

In case of welding, the inherent strains are generated, because a structure experiences the plastic yielding. The inherent strain is defined as the irrecoverable strain after removing structural restraints and loading. For the analysis method of welding distortion, equivalent loading method based on inherent strain is in general use due to its efficiency and effectiveness. However, it is generally difficult to know the final strain of the welded structure if additional loadings were applied after welding. for this reason, this study introduced the concept of the hardening and added the hardening term to the equivalent loading method based on inherent strain. Therefore, the purposes of this study are to develop the inherent strain formula considering the hardening effect and to calculate residual Stresses Using Proposed inherent Strain. Also, this Study Verified the availability Of proposed inherent strain method by loading-unloading experiment on welded plate.