• Journal of Biosystems Engineering
• /
• v.36 no.4
• /
• pp.252-256
• /
• 2011

Consumption of chicken feet has been increasing recently, thus it was necessary to produce good quality of bone less chicken feet. In the process of bone removal during chicken feet production, feeding, conveying, cutting and bone removing process takes about 90% of overall labor. Therefore, the development of a chicken feet-bone remover was necessary to reduce the cost of labor. There has been few research on the chicken feet bone removers so far in Korea as well as worldwide. So the main objective of this study was to develop a chicken feet-bone remover which is suitable for domestic circumstances. The average length of chicken feet was 113.3 mm with maximum and minimum lengths of 135.8 mm and 92.2 mm, and the average diameter of chicken leg was 12.5 mm, average width of the toe was 56.2 mm and the average weight of chicken feet was 26.4 g with maximum and minimum weight of 39.3 g and 16.9 g, respectively. Also, the average moisture content was 64.7% (w.b). The average cutting force of little toes was 15.6 N for the size ranges of less than 3.5 mm, 22.5 N, 3.5~6.0 mm and 30.3 N for larger than 6.0 mm in diameter, respectively.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.4
• /
• pp.311-319
• /
• 2019

The purpose of this study was to analyze water treatment characteristics, including the efficiency of removing algae from water purification plants, by installing a demonstration facility for decontamination of algae, including natural algae remover injection equipment, in the water purification plant. Jar-test showed that the optimum injection of natural decontaminant was 20 mg/L. Of the water contaminant treatment efficiency of the intake and water purification plants, Chl-a averaged 74.0% elimination efficiency from $5.0mg/m^3$ to $1.3mg/m^3$ and the maximum treatment efficiency was 91.5% removal efficiency when the inflow concentration of Chl-a was $11.8mg/m^3$. In addition, 51.2% and 47.1% of the taste and odor indicator items, geosmin and 2-MIB, resulted from the overgrowth and decaying of algae, respectively, to identify toxic substances and odor reduction effects. In addition, elimination efficiencies of SS and Turbidity materials were higher than 70.0%. In the injection of natural algae remover, no effects such as sudden changes in water quality due to secondary reactions were found, and appropriate levels were maintained under water treatment conditions.

• Journal of Biosystems Engineering
• /
• v.36 no.4
• /
• pp.257-266
• /
• 2011

Consumption of chicken feet has been increasing recently, thus it was necessary to produce good quality of bone less chicken feet. In the process of bone removal during chicken feet production, feeding, conveying, cutting and bone removing process takes about 90% of overall labor. Therefore, the development of a chicken feet-bone remover was necessary to reduce the cost of labor. The main objective of this study was to make and test of chicken feet-bone remover. The optimum vibration level of feeder wes 8, and the optimum conveyor speed was 3.6 m/min. The feeding speed of feeder were 0.18 m/s, 0.13 m/s and 0.19 m/s for the weight ranges of chicken feet of >20 g, 20~30 g and 30 g< respectively. The sensing success rates of chicken feet were 100%, 98% and 96% for the conveyor speeds of 3.0, 3.6 and 4.2 m/min respectively. The slips of chicken feet were 1.0 mm, 1.9 mm and 3.2 mm for conveyor speed of 0.8, 1.9 and 4.2 m/min respectively, with the average moisture content of 65% (w.b). The incision accuracy rates of the chicken leg were 46%, 95%, 97% for the size ranges of >15 mm, 15~18 mm, 18 mm< respectively with the velocity of cutting blade 3.9 m/s. The removal rates of the chicken feet bone were 98%, 96%, 88% for toes diameter >10 mm, 10~15 mm, 15 mm> respectively with the velocity of cutting blade 11.8 m/s.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.3
• /
• pp.57-64
• /
• 2010

This study is to analyze the effects of aluminum form surface coating material on surface quality of concrete. When observing the surface quality of concrete affected by the change of aluminum form surface coating material, in general, as the number of use of the coating material increased, the surface quality of concrete decreased and good surface quality was shown in plywood (hereinafter PW). For epoxy (hereinafter EP) resin, when applying form remover, good surface quality was shown. For the surface roughness of concrete by the application form oil of form remover and the number of use of the coating material, as the number of use increased, highest surface roughness value was shown which meant the leveling was bad, but the surface roughness value in EP and PW was the lowest. Just for EP, when applying form remover, surface roughness value was low. For the number of void for concrete by the application of form remover and the number of use of the coating material, In general, the number of void which was generated when applying form oil the remover decreased.

• Restorative Dentistry and Endodontics
• /
• v.48 no.1
• /
• pp.10.1-10.9
• /
• 2023

Objectives: This study compared the buckling resistance of 3 nickel-titanium (NiTi) retreatment file systems and the torque/force generated during retreatment. Materials and Methods: The buckling resistance was compared among the D-RaCe (DR2), HyFlex Remover, and Mtwo R25/05 retreatment systems. J-shaped canals within resin blocks were prepared with ProTaper NEXT X3 and obturated by the single-cone technique with AH Plus. After 4 weeks, 4 mm of gutta-percha in the coronal aspect was removed with Gates-Glidden drills. Retreatment was then performed using DR1 (size 30, 10% taper) followed by DR2 (size 25, 4% taper), HyFlex Remover (size 30, 7% taper), or Mtrwo R25/05 (size 25, 5% taper) (15 specimens in each group). Further apical preparation was performed with WaveOne Gold Primary. The clockwise torque and upward force generated during retreatment were recorded. After retreatment, resin blocks were examined using stereomicroscopy, and the percentage of residual filling material in the canal area was calculated. Data were analyzed using 1-way analysis of variance with the Tukey test. Results: The HyFlex Remover files exhibited the greatest buckling resistance (p < 0.05), followed by the Mtwo R25/05. The HyFlex Remover and Mtwo R25/05 files generated the highest maximum clockwise torque and upward force, respectively (p < 0.05). The DR1 and DR2 files generated the least upward force and torque (p < 0.05). The percentage of residual filling material after retreatment was not significantly different between file systems (p > 0.05). Conclusions: NiTi retreatment instruments with higher buckling resistance generated greater clockwise torque and upward force.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.300-304
• /
• 2013

Pine wilt disease caused by pine wood nematode, Bursaphelenchus xylophilus (Steiner et Buhrer) Nickle, has become the most serious threat to pine trees in Korea since 1988. Pine wood nematode is transferred to healthy trees by Monochamus alternatus (Coleoptera: Cerambycidae) during its maturation feeding and female oviposition. A typical control method against insect vectors in Korea is fumigation of the dead trees by using metam-sodium SL (25%). However, this method is not environment friendly because of the forest contamination by chemical application and destroying landscape by plastic cover. Portable Bark Remover (PBR) was invented to reduce these environmental problems. The vectors oviposit under the bark of the newly dead trees only. Debarking infested trees prevents the vectors from laying eggs and eventually, they can not complete their life cycle. The PBR is a modified debarking device that is attached on the top of the electrical chain saw, which allows ease and rapid debarking of the infested trees. The new method by PBR is expected to be more economic and effective than other conventional methods such as "crushing", "burning" and "fumigation".

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1486-1501
• /
• 2021

The removal of accessories from the face is one of the essential pre-processing stages in the field of face recognition. However, despite its importance, a robust solution has not yet been provided. This paper proposes a network and dataset construction methodology to remove only the glasses from facial images effectively. To obtain an image with the glasses removed from an image with glasses by the supervised learning method, a network that converts them and a set of paired data for training is required. To this end, we created a large number of synthetic images of glasses being worn using facial attribute transformation networks. We adopted the conditional GAN (cGAN) frameworks for training. The trained network converts the in-the-wild face image with glasses into an image without glasses and operates stably even in situations wherein the faces are of diverse races and ages and having different styles of glasses.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.283-292
• /
• 2017

Purpose: Japanese Apricot, a type of plum, has various medicinal and economical applications. Plums are quite popular worldwide, but their deseeding remains a serious impediment to their processing. Therefore, a plum (Japanese Apricot) seed remover (PSR) was developed that can use various types of cutters according to the purpose of the plum processing, and its performance was evaluated. Methods: The proposed PSR, which allows multipurpose cutters, namely, zero-, two-, and four-blade cutters, to be installed, was first designed and manufactured. To identify appropriate parameters related to the cutting pressure, plums were harvested from three regions during three harvesting periods, and their geometrical and mechanical properties were measured. After application of the parameters related to the cutting pressure, a performance test was carried out on both fresh and frozen plums by identifying the ratios of the flesh recovery, seed recovery, seed breakage, deseeding efficiency, and machine efficiency. Results: The results show that, using the proper calculation of the processing parameters, 100% deseeding efficiency was facilitated regardless of the type of cutter used. However, in the case of a four-blade cutter, there are significant differences in the flesh recovery ratio according to the plum setting angle. Between the fresh and frozen plums, all cutters showed a significantly better flesh recovery ratio for the case of fresh plums. Conclusions: This machine will advance the plum processing technology, and eventually help the plum industry flourish.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.2
• /
• pp.91-97
• /
• 2005

We investigated the question whether protein removing activities of enzyme cleaner - protein remover for soft contact lens - are associated with the material of soft contact lens as well as action time, temperature and pH of enzyme solution. We used a subtilisin cleaner as protein remover and estimated the protein amount remained on soft contact lens after using the subtilisin cleaner under the different conditions. The remained protein in soft contact lens was greatly decreased until treatment for 60min, but no significant differences were found from 60min to 24hr. The cleaning effect of the enzymatic treatment in the range of $15{\sim}30^{\circ}C$ was constant. however, there was a significant decline of the protein removing effect at $10^{\circ}C$ and less. The pH of the solution was also important for the efficacy of the enzymatic treatment. The activity of the enzyme cleaner was highest in pH 8.0 and significantly decreased a pH below 7. The pH dependence was found to be related to the conformational change of subtilisin. Furthermore, significant differences in the protein deposit removing efficacy of the subtilisin cleaner were found among the soft contact lens materials.

• Magazine of RCR
• /
• v.7 no.1
• /
• pp.26-30
• /
• 2012