• Smart Media Journal
• /
• v.13 no.5
• /
• pp.52-61
• /
• 2024

The onset of the COVID-19 pandemic has accelerated social transformations across various nations. These changes, particularly prominent in the corporate and industrial sectors, have necessitated a shift towards increased remote activities, fundamentally altering societal structures. Within this context, the concept of the Metaverse, a virtual world existing since the early 2000s but previously underrecognized, began to gain widespread recognition. In South Korea, major tech companies such as Naver, Kakao, and Coupang have long normalized remote working, with new employee orientations also taking place on Metaverse platforms. Beyond the IT sector, institutions requiring large gatherings, such as schools, have adopted the Metaverse for hosting major events like welcome ceremonies and informational sessions. This phenomenon suggests that the Metaverse is not merely a transient social trend but is gradually integrating into the daily lives of the general populace, serving as a significant social connector. This study explores the potential of Metaverse-enabled design thinking and methodologies to address the Environmental, Social, and Governance (ESG) challenges faced by Korean society. Specifically, the research focuses on developing solutions for social issues related to pets in Korea.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.6
• /
• pp.25-35
• /
• 2016

In this study, the evaluation of the dynamic behavior and thermal performance of the "Façade integrated Natural circulation Solar Water Heating System" installed in the residential house was carried out. Experimental tests were performed during the all year around in the rural houses of $166m^2$ in size. Facade integrated solar collector of $5m^2$ were installed on the south-facing. Electrical heater of 1 kW capacity as an auxiliary heater was installed at the upper part of the heat storage tank. The analyzing results are as follows. (1) Monthly average solar fraction was 51 to 87% and yearly average value is 64%. (2) Hot water supply temperature in December which has the lowest solar altitude is 37 to $76^{\circ}C$. The highest working fluid temperature of solar collector in this period was below $84^{\circ}C$. The temperature difference of working fluid between the collector inlet and outlet has been shown to be around 9 to $26^{\circ}C$. (3) Overheating which is one of the biggest problems during summer did not appear at all, but rather had hot water supply temperature is rather low as $30{\sim}47^{\circ}C$ in summer than winter, which is supplied by a small solar load. The solar collecting temperature has been shown to maintain below $55^{\circ}C$. (5) The thermal performance of Facade integrated solar collector can be increase due to the reduction of heat loss to the back of the collector wall integration of the collector is reduced. As a conclusion, Facade integrated natural circulation type Solar Water Heating System is a well-functioning without any pumps or controllers, and it was found that the disadvantages of conventional solar water heaters, hot water or hot water system can be greatly improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.51-56
• /
• 2016

In this paper, we propose an Arduino-based plant monitoring system. The proposed system is based on the Arduino platform, using an environmental sensor and a pressure sensor for measuring temperature, humidity and illuminance in order to monitor the state of the environment and the facilities of the plant. Monitoring data are transmitted to a ZigBee coordinator connected to a server through a radio frequency transceiver. When using a pressure sensor and the environment sensor data stored on the host server, checking the pressure in the environment of the plant and equipment is intended to report any alarm status to the administrator. Using a grid line-based key distribution scheme, the authentication node dynamically generates a data key to protect the monitoring information. Applying a ZigBee wireless sensor network does not require additional wiring for the actual implementation of a plant monitoring system. Possible working-environment monitoring of an efficient plant can help analyze the cause of any failure by backtracking the working environment when a failure occurs. In addition, it is easy to expand or add a sensor function using the Arduino platform and an expansion board.

• Journal of Korean Academy of Nursing
• /
• v.24 no.4
• /
• pp.568-583
• /
• 1994

In the changing social and economic conditions, reorientation of the health care system is a process of rearranging health care resources keeping in mind the appropriativeness, relevancy, and efficacy of health care programs. Also it has been recognized recently that the CHP program is in need of review for the same reasons, that is to say, the ease in which health care facilities are available, the high rate of coverage with insurance and the development of an effective transportation system. Therefore there is a social inclination to think that there are no remote areas and to question the roles of public health facilities, health centers, health sub centers and CHP posts. This paper was done to review problems and to propose new directions for the CHP system. The findings of this study are as follows ; 1) It is necessary that primary health care should be simplified into three parts, medical treatment, preventive care services and the organization of administration and logistics. Also each department should be supplemented with the appropriate professional personnel in order to develop a task oriented system. The reorientation of the CHP system should be managed in keeping with that of other public health care systems. Therefore it is necessary to look at the CHP system problems as one aspect of the reorientation process of public health care systems, and to work to find new ways to address these problems. 2) The location of the CHP post should be decided by the needs of the community in both the medical and preventive areas. If the people have a minimum need, the location of the CHP post should be altered and the existing roles of the CHP should be modified to allow for flexibility according to the community needs. 3) Use of the problem solving method in regular team meetings will prove to be as efficient as continuing education programs in improving job competancy. 4) The supervision of CHP's activities should be made by the same type professional personnel, that is, senior CHPs or charge nurses in the public health center at the county level. 5) The operational expensies of CHP post should be supported by the administrative department of the public health center and should create working conditions that will allow the CHP to concentrate on community health service programs. 6) The organizations for community participation, working committees, community health workers and a number of the local assembly, should be activated to provide for participation in finding solutions to health related problems in the com-munity.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.227-237
• /
• 2014

The purpose of this paper is to implement a multiple bio-signal central monitoring system based on textile fabrics flexible platform which can obtain and monitor bio signals(heart rate, body temperature, electrocardiography, electromyogram) of workers in special working environments and additional situational information (3-axis acceleration, temperature, humidity, illumination, surrounding image). This system can prevent various accidents that may occur in the remote work environment and provide fast and efficient response by detecting workers' situations in real-time. For it, the textile fabrics flexible platform was made as innerwear or outerwear so that it does not interfere with workers' performance while collecting bio-signal and situational information, and obtained information is sent to the central monitoring system through wireless communication. The central monitoring system is based on wireless medical telemetry service of WMTS (Wireless Medical Telemetry Service); can monitor from 2 to 32 people simultaneously; and was designed so that it can be expanded. Also, in this study, to verify performance of the WMTS communication model, packet transmission rates were compared according to the distance.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.93-102
• /
• 2012

The purpose of this research is to create a preferable corporate culture under the SmartWork environment. There is growing interests in SmartWork, which can satisfy the compatible conditions of government's carbon emission restriction policy, corporate efficient expense reduction, productivity maximization, and each individual's work and a family. Due to the interests and the rapid development of IT technology, a realistic condition for SmartWork is established but the promotion without a sufficient preparation, such as legal examination and relevant systems, created much confusion and very few companies are introducing it. This paper discusses that a social agreement should be reached through adjustments among parties interested, such as government, companies, and employees, studies the WIN-WIN plan that individuals and organization can grow together, and proposes a new corporate culture under the SmartWork environment. SmartWork has more than the simple meaning of 'remote working'. SmartWork, a method of smart working, means a transition to a new paradigm that minimizes moving for work and work & human move together, and a change from a work-oriented culture to a human-oriented culture. This paper summarized the role of government and companies for the successful introduction of SmartWork, and proposed that a government level 'SmartWork Activation Executive Committee (tentative name)' with a strong promotional power would create a new culture of SmartWork and form a civilian consultative body to support SmartWork corporate culture creation & expansion in the private corporate area, in a tuning with Ministry of Public Administration & Security, Ministry of Labor, Ministry of Gender, and Communications Commission.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.5
• /
• pp.980-997
• /
• 2013

Nowadays, wireless communication has a great advantage in technology. We use wireless devices almost in all expected life such as: entertainment, working and recently in the healthcare area, where Wireless Body Area Networks (WBANs) become a hot topic for researchers and system designers. Recent work on WBANs focus on related issues to communication protocol, especially ZigBee network is fine tuned to meet particular requirements in healthcare area. For example, some papers present real-time patient monitoring via ZigBee communication given the short distance between body sensors and remote devices, while the other work solve the limited coverage problem of Zigbee by designing mechanisms to relay Zigbee data to other types of wire or wireless infrastructure. However, very few of them investigate the scenarios of ZigBee coexisting or integrated with other networks. In this paper, we present the real-time data transmission from ZigBee end devices to Wide Area Network (WAN), Worldwide interoperation for microwave access network (WiMAX) and Long Term Evolution network (LTE). We provide in detail the ZigBee gateway components. Our simulation is conducted by OPNET, we visualize many topology network scenarios in ZigBee hybrid system. The results in simulation show that ZigBee end devices can successfully transmit data in real-time to other network end devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2581-2585
• /
• 2010

In the field of network sense for the Ubiquitous environment, the technology of RFID is a significant part. Due to the real time processing of information and the property of network, RFID has been used in service field such as distribution, administrative control of physical distribution, remote measuring device, and security. instead of currently used bar-code. The management system of port facilities using the current RFID technology has the effects of reducing working hours and improvement in data processing, but it is not proper for human resource allocation since it is dominantly worked for physical resources. In this paper, we designed and implemented personnel control system using RFID of 2.4GHz in port facilities which presents a monitoring system for safety operation and increase of efficiency using RFID in order to overcome the limitations and problems of current port operation management techniques.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.94-100
• /
• 2017

In this paper, we suggest a design method of a metamaterial-based low-profile antenna working at 425 MHz for LEO/Cube satellites. Satellites play an important role in linking th remote nodes in a wireless communication network and covering wide areas of the globe. Especially, an increasing number of universities or individuals aspire having their own satellites and build low-budget structures such as cube satellites in LEO and the ways to reduce the sizes of their satellites. Since the antenna occupies a major portion of the satellite surface, the antenna should be miniaturized for lighter weight. The proposed metamaterial low-profile antenna, unlike the conventional patch antenna, produces such a zeroth-order resonance to create an omnidirectional radiation pattern. Also, it is connected to a UHF waveguide bandpass filter as the feeding system to examine the possible change in the situation that the antenna is combined with the system. The performances of the monopole and proposed metamaterial antennas are compared to one another.

• Journal of Information Technology Services
• /
• v.19 no.5
• /
• pp.33-47
• /
• 2020

In recent years, due to the demand for operating efficiency and cost reduction of industrial facilities, remote access via the Internet is expanding. the control network accelerates from network separation to network connection due to the development of IIoT (Industrial Internet of Things) technology. Transition of control network is a new opportunity, but concerns about cybersecurity are also growing. Therefore, manufacturers must reflect security compliance and standards in consideration of the Internet connection environment, and enterprises must newly recognize the connection area of the control network as a security management target. In this study, the core target of the control system security threat is defined as the network boundary, and issues regarding the security architecture configuration for the boundary and the role & responsibility of the working organization are covered. Enterprises do not integrate the design organization with the operation organization after go-live, and are not consistently reflecting security considerations from design to operation. At this point, the expansion of the control network is a big transition that calls for the establishment of a responsible organization and reinforcement of the role of the network boundary area where there is a concern about lack of management. Thus, through the organization of the facility network and the analysis of the roles between each organization, an static perspective and difference in perception were derived. In addition, standards and guidelines required for reinforcing network boundary security were studied to address essential operational standards that required the Internet connection of the control network. This study will help establish a network boundary management system that should be considered at the enterprise level in the future.