• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.599-600
• /
• 2006

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.158-161
• /
• 2017

In this paper, we propose Total RMS(Radiation Monitoring System) for nuclear and nuclear medicine. The proposed system can expand and control Stack Monitor, Area Monitor, and Water(Liquid) Monitor into one system, and can monitor the signals measured by each radiation detector in an integrated manner. The proposed system consists of a sensor module that detects the radiation, a display unit that displays the radiation dose near the radiation detection location, an alarm unit that reports the alarm when the detected radiation dose reaches the danger level, A Main Hub for collecting and storing the contents to the remote monitoring system, and an RMS Monitoring Unit for clearly displaying the measured radiation dose at the remote site. In order to evaluate the performance of Total RMS for the proposed nuclear and nuclear medicine field, it is confirmed that the measurement uncertainty is less than 8.5% and it operates normally within ${\pm}15%$ of the international standard.

• Journal of Drive and Control
• /
• v.19 no.4
• /
• pp.29-35
• /
• 2022

In this paper, we developed a workload index for monitoring the durability test using operation information of an excavator. First, the acceleration and cylinder pressure were selected as load factors by analyzing operation data. Through load correlation analysis according to each load factor, Root Mean Square (RMS) and Work Load Range (WLR) were respectively derived as a load feature representing mechanical load. In addition, the workload index was used to quantify load features. For applying the workload index to monitoring, a real-time monitoring system consisting of sensors and embedded controller was installed on the excavator and the system was integrated with a remote monitoring environment using a wireless network. Results of load monitoring and analysis verified that the developed workload index was effective from the viewpoint of the relative comparison of the workload.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.81-86
• /
• 2005

A vibration monitoring system for a small class of wind turbine (W/T) is established and operated. The monitoring system consists of monolithic integrated chip accelerometer for vibration monitoring, anemometers for wind data acquisition and auxiliary sensors for atmospheric data. Using the monitoring system, vibration response of a 6kW W/T generator is investigated. Acceleration data of the W/T tower under various operation condition is acquired in real time using LabVIEW and is remotely transferred from the test site to the laboratory in school by internet. Vibration state of the tower structure is diagnosed within the operating speed range. Resonance frequency range of the test model is investigated with the wind speed data of the test site.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.135-136
• /
• 2022

As a recent technology, it is possible to partially grasp the occurrence of displacement of the entire building through artificial intelligence technology for big data through scanning. However, scanning and data processing take a lot of time, so there is a limit to constant monitoring, so constant monitoring technology of building behavior that combines wireless remote sensors and 3D shape scanning is required. Therefore, in this study, artificial intelligence program coding technology is linked. In addition, a technology capable of real-time wireless remote measurement of structure displacement will be developed through technology development in response to safety management that combines existing building technologies such as sensors. Through this, it is possible to establish an integrated management system for safety inspection and diagnosis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.115-122
• /
• 2003

This paper presents the development of a virtual forging factory framework. The technologies of virtual reality and relational database had been integrated in the developed framework using Microsoft $Windows^{(R)}$ programming as the main technique so as to emulate a physical forging factory. The developed virtual forging factory consists of forging cells and a forging cell is comprised of forging machine, forging die, and forging operations forming a forging production line. The technology of virtual reality had been successfully adopted in the production simulation of manufacturing such as CNC and robotics. However, the application in virtual forging factory seems to have not been studied yet. Potential application of a virtual forging factory can be beneficial to (1) computer aided instruction, (2) shorten the learning curve of a novice, (3) remote diagnosis and monitoring when remote monitoring and control technology and signal inspection is considered, (4) improve adverse forging environment when remote forging technology is applied, and (5) virtual reality application.

• Korean Journal of Remote Sensing
• /
• v.35 no.1
• /
• pp.163-177
• /
• 2019

As inter-Korean relations progress, the issue of natural disasters which could directly affect the lives of the people in both Koreas, has not yet been discussed. Considering the current status of inter-Korean relations and the ongoing disaster-related damage in North Korea, it is imperative to establish a technical plan at the pan-governmental level to reduce the damage from natural disasters. The purpose of this study is to secure the Korea Peninsula against natural disasters by organizing South Korea's science and technologies related to natural disasters in order to reduce the damage, and to evaluate the applicability of said technologies. The situation of natural disasters in North Korea for 17 years has been summarized and reclassified based on eight types of natural disasters. Technologies related to natural disasters in South Korea were also investigated and reclassified. Based on the data, a priority evaluation was performed and the prioritization of technology application for each natural disaster type in North Korea was calculated through a quadrant analysis. As a result, the three major categories of high-priority technologies were classified as natural disaster monitoring with remote sensing and spatial information technology, construction of research basis and database based on geographic information system (GIS) and integrated management of complex natural disasters.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.541-545
• /
• 2010

Because contemporary rolling stock system is complex and highly advanced, and it builds mutual interface, it is necessary to manage maintenance of rolling stock systematically. This study present a case, which shows how to adopt and apply RTD(Remote Transmission Device) integrated to train information collection device. After the train service is complete and the train enters the main subway station, various kinds of information collected from TCMS(Train Control Monitoring System) is transmitted to train depot information collection device through RTD. This study suggests that RTD integrated to train information collection device helps build an effective rolling stock maintenance system by improving reliability of data transmission and cutting maintenance costs.

• Smart Structures and Systems
• /
• v.17 no.6
• /
• pp.981-994
• /
• 2016

Two field research stations based upon atmospheric corrosivity monitoring combined with reinforced concrete corrosion rate sensors have been established in Kuwait. This was established for the purpose of remote monitoring of building materials performance for concrete under Kuwait atmospheric environment. The two field research sites for concrete have been based upon an outcome from a research investigation intended for monitoring the atmospheric corrosivity from weathering station distributed in eight areas, and in different regions in Kuwait. Data on corrosivity measurements are essential for the development of specification of an optimized corrosion resistance system for reinforced concrete manufactured products. This study aims to optimize, characterize, and utilize long-term concrete structural health monitoring through on line corrosion measurement and to determine the feasibility and viability of the integrated anode ladder corrosion sensors embedded in concrete. The atmospheric corrosivity categories supported with GSM remote data acquisition system from eight corrosion monitoring stations at different regions in Kuwait are being classified according to standard ISO 9223. The two nominated field sites where based upon time of wetness and bimetallic corrosion rate from atmospheric data where metals and rebar's concrete are likely to be used. Eight concrete blocks with embeddable anodic ladder corrosion sensors were placed in the atmospheric zone adjacent to the sea shore at KISR site. The anodic ladder corrosion rate sensors for concrete were installed to provide an early warning system on prediction of the corrosion propagation and on developing new insights on the long-term durability performance and repair of concrete structures to lower labor cost. The results show the atmospheric corrosivity data of the environment and the feasibility of data retrieval of the corrosion potential of concrete from the embeddable sets of anodic ladder corrosion sensors.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.4
• /
• pp.148-152
• /
• 2007

This paper develops an integrated optic transmitter/receiver based on ring-type WDM PON. The optic transmitter/receiver can transmit real-time images from the CCTV of a remote street without compression and transmit TCP/IP data using an optic fiber. This system can also perform remote controls of the CCTV camera. The developed optic transmitter/receiver can provide the monitoring service of an advanced image quality of remote traffic using a broadband technology.