• 제목/요약/키워드: Remote Stereoscopic Photographs

검색결과 4건 처리시간 0.02초

원거리 입체촬영용 카메라 축간거리 조절을 위한 퍼지추론 시스템 (Design of Fuzzy Inference System for Cameras Inter-Axial Distance Control of Remote Stereoscopic Photographs)

  • 변기식;오세웅;김관형;김민;김현조
    • 한국정보통신학회논문지
    • /
    • 제19권1호
    • /
    • pp.41-49
    • /
    • 2015
  • 일반적으로 원거리 피사체를 입체로 촬영할 경우 두 대의 카메라를 교차하기 보다는 평행으로 놓고 좌우 영상을 획득한다. 이를 위해서 특정거리 피사체에 대하여 축간거리와 렌즈의 초점거리를 다양하게 변화시켜가면서 좌우영상들의 깊이총량을 분석하였다. 이들 분석 작업을 통하여 시각적 피로와 시각적 불안정을 주지 않는 축간거리와 렌즈의 초점거리에 대한 데이터를 선택하고, 이들 데이터를 통하여 퍼지제어기를 설계하였다. 피사체에 대한 입체영상을 획득하기 위하여 설계한 퍼지제어기로 축간거리와 렌즈의 최대초점거리를 추론하여 안정된 입체영상임을 확인하였다. 설계된 퍼지제어기는 원거리 피사체의 거리만 입력되면 카메라의 축간거리와 카메라 최대 초점거리 범위가 설정되는 동적 시스템 설계에 활용될 수 있음을 확인하였다.

A Structure-controlled Model for Hot Spring Exploration in Taiwan by Remote Sensing

  • Liu, Jin-King;Yu, Ming-Fang;Ueng, Shiun-Jenq
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
    • /
    • pp.28-30
    • /
    • 2003
  • Hot Spring Law of Taiwan was passed in legislative assembly on 3 June 2003. Hot springs would become one of the most important natural resources for recreation purposes. Both public and private sectors will invest large amount of capital in this area in the near future. The value of remote sensing technology is to give a critical tool for observing the landscape to find out mega-scaled geological structures, which may not be able to be found by conventional approaches. The occurrences of the hot springs in Taiwan are mostly in metamorphic and sedimentary rocks , other than in volcanic environments. Local geothermal anomaly or heat of springs transfer by liquid convection other than conduction or radiation. The deeply -seated fractures of hard rocks are the conduit of the convection of hot water, which could be as deep as 3000 meters in a hypothetical model of Taiwan. Clues to find outcrops of hot spring can be obtained by a structure-controlled model deduced by geological lineaments observed by satellite images and stereoscopic interpretation of aerial photographs. A case study conducted in Eastern Taiwan will be demonstrated.

  • PDF

Rigorous Modeling of the First Generation of the Reconnaissance Satellite Imagery

  • Shin, Sung-Woong;Schenk, Tony
    • 대한원격탐사학회지
    • /
    • 제24권3호
    • /
    • pp.223-233
    • /
    • 2008
  • In the mid 90's, the U.S. government released images acquired by the first generation of photo reconnaissance satellite missions between 1960 and 1972. The Declassified Intelligent Satellite Photographs (DISP) from the Corona mission are of high quality with an astounding ground resolution of about 2 m. The KH-4A panoramic camera system employed a scan angle of $70^{\circ}$ that produces film strips with a dimension of $55\;mm\;{\times}\;757\;mm$. Since GPS/INS did not exist at the time of data acquisition, the exterior orientation must be established in the traditional way by using control information and the interior orientation of the camera. Detailed information about the camera is not available, however. For reconstructing points in object space from DISP imagery to an accuracy that is comparable to high resolution (a few meters), a precise camera model is essential. This paper is concerned with the derivation of a rigorous mathematical model for the KH-4A/B panoramic camera. The proposed model is compared with generic sensor models, such as affine transformation and rational functions. The paper concludes with experimental results concerning the precision of reconstructed points in object space. The rigorous mathematical panoramic camera model for the KH-4A camera system is based on extended collinearity equations assuming that the satellite trajectory during one scan is smooth and the attitude remains unchanged. As a result, the collinearity equations express the perspective center as a function of the scan time. With the known satellite velocity this will translate into a shift along-track. Therefore, the exterior orientation contains seven parameters to be estimated. The reconstruction of object points can now be performed with the exterior orientation parameters, either by intersecting bundle rays with a known surface or by using the stereoscopic KH-4A arrangement with fore and aft cameras mounted an angle of $30^{\circ}$.

다중분광 항공촬영 시스템(PKNU 3) 검정 및 보정에 관한 연구 (Research for Calibration and Correction of Multi-Spectral Aerial Photographing System(PKNU 3))

  • 이은경;최철웅
    • 한국지리정보학회지
    • /
    • 제7권4호
    • /
    • pp.143-154
    • /
    • 2004
  • 원격탐사는 각종 상업용 위성과 항공사진을 바탕으로 이루어진다. 그러나 이러한 자료는 연구자들이 원하는 시기와 장소에 따라 촬영되는데 자료 획득시, 기상조건 및 경제적 이유로 많은 어려움을 겪고 있다. 이러한 문제점을 해결하고자 본 연구에서는 소형비행기 및 초경량 비행기에 탈부착이 가능한 소형 다중분광 자동 항공촬영시스템(PKNU2)을 개발하였다. PKNU2호는 연구실 자체 보유한 고해상도 가시대역, 적외선대역 카메라를 이용하여 칼라영상 및 적외 영상을 획득하였다. 환경감시 등의 목적으로 칼라 적외 합성영상을 생성, 분석하였으나 그리 만족스러운 결과를 획득하지 못하였다. 또한 PKNU2호가 대용량 촬영은 가능하였지만 데이터 저장시간이 12초로 횡중복률 60%를 만족시키지 못하였다. 현재 우리는 PKNU2호의 단점을 극복하고자 가시대역과 적외선 대역의 자료를 한번에 획득할 수 있 칼라 적외선 분광카메라, 열적외 카메라, 그리고 영상의 실시간 저장이 가능한 MPEG board를 도입하여 헬리콥터에 탈부착이 가능한 소형 다중분광 자동 항공촬영시스템(PKNU3)을 개발하고 있다. 본 연구에서는 본격적인 촬영에 앞서 가치 있는 영상 획득을 위해 센서의 특성 평가를 실시, 센서의 분광 특성 보정 및 렌즈의 기하학적 왜곡 보정을 작업을 실시하였다.

  • PDF