• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.821-824
• /
• 1993

In hazardous conditions, where entry of human operators is restricted, such as high radiation regions in nuclear facilities, a lot of remote inspections and remote handling tasks must be performed. In this study, the stereo imaging system has been developed and the remote handling technique, has been studied to enhance the efficiency of tele-operation. The nozzle dam handling robot is one of the most important robots applied to nuclear facility. The robot will be equipped with the developed stereo imaging system. The stereo imaging system will outstandingly improve the tele installing/removal tasks for nozzle dam.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1221-1224
• /
• 2004

This paper presents the programmable logic controller (PLC) networking development for communication with the mobile phone. The proposed technique is suitable for remote sensing control systems, which can display the operation status and monitoring fault diagnosis of a system. The system operation is based on the use of personal computer (PC) to logically analyze data from PLC, and existing internet protocol for sending information messages to mobile phones.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.3
• /
• pp.9-15
• /
• 2014

In the ubiquitous computing environment, a ubiquitous vehicle will be a communication node in the vehicular network as well as the means of ground transportation. It will make humans and vehicles seamlessly and remotely connected. Especially, one of the prominent services in the ubiquitous vehicle is the vehicle remote operation. However, mutual-collaboration with the in-vehicle communication network, the vehicle-to-vehicle communication network and the vehicle-to-roadside communication network is required to provide vehicle remote operation services. In this paper, an Internet-based human-vehicle interfaces and a network architecture is presented to provide remote vehicle control and diagnosis services. The performance of the proposed system is evaluated through a design and implementation in terms of the round trip time taken to get a vehicle remote operation service.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.811-814
• /
• 1993

The development of fuzzy pan/tilt controller for remote handling in hostile environment is presented in this paper. In remote handling, control of the camera system is somewhat tedious and time consuming. Operators should do the two tasks of manipulating teleoperator and camera pan/tilt at the same time. By automating pan/tilt control, we expect operators could concentrate only on remote operation. When operators control camera pan/tilt they use simple linguistic rules such as "If the position of end effector on TV monitor is at the edge of the screen, control pan/tilt to display the end effector near the center of the screen." Such a rule is similar to fuzzy logic, so we used fuzzy logic controller to control camera pan/tilt. pan/tilt.

• Journal of Biosystems Engineering
• /
• v.20 no.3
• /
• pp.226-235
• /
• 1995

An unmanned speed sprayer was developed using a remote control and an inductive cable guidance systems to protect operators and environment from hazardous pesticides. The sprayer consists of a remote control system, an induction system, obstacle detectors, control actuators and an one-chip microcomputer. The sprayer can be operated by the induction guidance and/or remote control. The following summarize characteristics of the developed speed sprayer. 1) Both the remote control and the induction guidance operation were possible with the developed speed sprayer. 2) Sixteen functions of the forwarding, backing, halting, steering, 3-way valve for nozzles and fan operating etc. were utilized on the remote control system. 3) It was concluded that the DTMF method, having less transmitting error, performed better than the FSK method for an agricultural remote controller. A radio station may be necessary. 4) The digital inductive guidance system, consisting of five low-impedance detection coils and a window comparator circuit, performed better than the analog detecting system, guiding route using inductive voltage differential from tow detection coils.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.67.3-67
• /
• 2002

$\textbullet$ Introductions $\textbullet$ Sensor system $\textbullet$ Driving System steering system $\textbullet$ Wireless communication system $\textbullet$ O/I (Operation/Interface) system $\textbullet$ Conclusions

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.65.6-65
• /
• 2001

The satellite communication has been widely applied in the various fields included the remote monitoring and control system through the technical progress. In the star network that is a type of the satellite communication network, users can easily use an earth station because of the large scale and high power of the hub station. This type has many profits which are flexible of network configuration, and can conveniently and inexpensively supply various services which is used in the data acquisition and distribution by important communication means for construction of information society. Using these profits, the satellite communication system is applied to the unmaned remote operation field for the remote control and monitor of the water treatment plants But, ...

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.10
• /
• pp.72-80
• /
• 2012

In general, electronic conveyor scales are installed in a relatively distributed manner on the crushed rock and sand production site. It is one of the time-consuming and difficult engineering works to monitor and control the plant operation status such as the management of measuring data, malfunction of belt conveyor, and fault of electronic conveyor scale. Therefore, to alleviate the inefficient problems and to monitor the operating plant in the online and remote control room, a remote calibration and real-time monitoring system, which is practically applied to the electronic conveyor scale system and verified by onsite experiment, is developed based on the LabVIEW.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.558-560
• /
• 1998

The operation of robot manipulators has a restriction that the operator must reside at the factory, where the manipulator is used. To overcome this restriction, we propose a remote control system using the internet, the system which runs on the Window 95 environment is composed of the remote client which transfers commands to the server which control and manage the manipulator in the factory. In the control of Hong-ik Direct Drive Arm, it is necessary to consider the complex nonlinear parameters causing the mutual interaction between joints, so we use two TMS320C31 DSP chips in the controller for the real time dynamic control algorithms. For the test of system integrity and the verification of the mathematical modeling, we apply CTM, PD and VSS control algorithms and the simulation results are satisfactory.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.65-74
• /
• 1994

Backcap is an electric remote control system for the operation of directional flow control valves. This paper presents a new type of basckcap system which is characterized by its simple construction. The backcap is essentially a hydraulic cylinder of which the piston is connected to a spool of hydraulic valve and controlled by input current. An inherent feedback is imposed on its mechanism so that no artificial noe is needed. Characteristics of the backcap is verified by stability analysis, transient motion and steady state positioning for step inputs. Design parameter analyses have been executer by some analytical approaches and computer simulations, which lead to their optimal valves. These results contributed to an effective new backcap system and its design strategy.