• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.849-854
• /
• 2018

Radio base stations, which are widely distributed across large areas, have many difficulties in managing them. Unmanned radio base stations in remote mountains are having a hard time accessing them in case of emergencies. Major telephone service providers only remotely control incoming and outgoing information and local small business partners responsible for maintaining actual facilities do not possess such technologies, so they are each checked during field visits. In this study, in order to process the sensor raw data and smoothing, we apply the particle filters and confirmed that the performance of sensor data accuracy is increased. Integrated system using temperature, humidity, fire condition, and power operation at a wide range of radio base stations under the real-time monitoring status is operated well. It show that all of the status of base station are monitored at the remote office using the cloud server through internet networking.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.493-496
• /
• 2005

The PMU (Payload Management Unit) in MSC (Multi-Spectral Camera) is the main subsystem for the management, control and power supply of the MSC payload operation. The PMU shall handle the communication with the BUS (Spacecraft) OBC (On Board Computer) for the command, the telemetry and the communications with the various MSC units. The PMU will perform that distributes power to the various MSC units, collects the telemetry reports from MSC units, performs thermal control of the EOS (Electro-Optical Subsystem), performs the NUC (Non-Uniformity Correction) function of the raw imagery data, and rearranges the pixel data and output it to the DCSU (Data Compression and Storage Unit). The BUS provides high voltage to the MSC. The PMU is connected to primary and redundant BUS power and distributes the high unregulated primary voltages for all MSC sub-units. The PSM (Power Supply Module) is an assembly in the PMU implements the interface between several channels on the input. The bus switches are used to prevent a single point system failure. Such a failure could need the PSS (Power Supply System) requirement to combine the two PSM boards' bus outputs in a wired-OR configuration. In such a configuration if one of the boards' output gets shorted to ground then the entire bus could fail thereby causing the entire MSC to fail. To prevent such a short from pulling down the system, the switch could be opened and disconnect the short from the bus. This switch operation is controlled by the BUS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.677-684
• /
• 2017

Smart devices are used in a variety of industries, because applications for them are easy to develop and portable. However, industrial equipment can cause security problems for information and accidents when controlling the actuator of the equipment at a remote location. In this paper, we studied methods of solving these problems and the advantages of applying smart control systems to industrial equipment. We propose a manual manipulation method using queries and a smart control access procedure for controlling equipment using a smart device. In addition, we propose a data transmission method employing multiple encryption protocols and a user authentication method using unique information from the smart device and Q & A as the communication data protection and user authentication methods, respectively. In order to evaluate its performance, an operation test of the smart control system and user authentication comparison experiment were performed. In order to understand the advantages of applying the smart control system to the equipment, we conducted a comparative experiment with a teach pendant and evaluated its reaction time in case of error.

• Publications of The Korean Astronomical Society
• /
• v.11 no.1
• /
• pp.163-175
• /
• 1996

We propose the development and test result of new optical axis alignment system for the interchangeable F/8 secondary mirror of the BOAO 1.8m telescope system. Since the original system was not equipped with a suitable optical alignment facility, the whole alignment process was performed by hand. It was necessary at least three persons working more than 2 nights and the altitude of the telescope could not exceed 10 degrees, in such altitude the alignment quality was not so good by atmospheric effect. The new system adopts position readable motorized system and remote control operation by the computer installed in observation room, which reduces the number of workers to only one and eliminates the altitude restriction. The defocused CCD image pair obtained at higher altitude makes the aberration estimates more accurately and the number of required alignment loops is reduced from 10 to 4. The system has been installed on September 1, and performed alignment three times. The test results show that the system is stable and accurate, gives better optical performance of the telescope under F/8 focus. We hope to emphasize the fact that the new system will increase observation time of the telescope by about 20 nights per year assuming one alignment in every month.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.130-133
• /
• 2007

In order to get high quality and high resolution image data from the space-borne camera system, the image chain from the sensor to the user in the ground-station need to be designed and controlled with extreme care. The behavior of the camera system needs to be controlled by ground commands to support on-orbit calibration and to adjust imaging parameters and to perform early stage on-orbit image correction, like gain and offset control, non-uniformity correction, etc. The operation status including the temperature of the sensor needs to be transferred to the ground-station. The preparation time of the camera system for imaging with specific parameters should be minimized. The camera controller needs to synchronize the operation of cameras for every channel and for every spectral band. Detail timing information of the image data needs to be provided for image data correction at ground-station. In this paper, the design of the camera controller for the AEISS on KOMPSAT-3 will be introduced. It will be described how the image chain is controlled and which imaging parameters are to be adjusted The camera controller will have software for the flexible operation of the camera by the ground-station operators and it can be reconfigured by ground commands. A simple concept of the camera operations and the design of the camera controller, not only with hardware but also with controller software are to be introduced in this paper.

• Journal of Multimedia Information System
• /
• v.7 no.4
• /
• pp.249-256
• /
• 2020

Learning methods using various assistive and smart devices have been developed to enable independent learning of the disabled. Pointer control is the most important consideration for the disabled when controlling a device and the contents of an existing graphical user interface (GUI) environment; however, difficulties can be encountered when using a pointer, depending on the disability type; Although there are individual differences depending on the blind, low vision, and upper limb disability, problems arise in the accuracy of object selection and execution in common. A multimodal interface pilot solution is presented that enables people with various disability types to control web interactions more easily. First, we classify web interaction types using digital devices and derive essential web interactions among them. Second, to solve problems that occur when performing web interactions considering the disability type, the necessary technology according to the characteristics of each disability type is presented. Finally, a pilot solution for the multimodal interface for each disability type is proposed. We identified three disability types and developed solutions for each type. We developed a remote-control operation voice interface for blind people and a voice output interface applying the selective focusing technique for low-vision people. Finally, we developed a gaze-tracking and voice-command interface for GUI operations for people with upper-limb disability.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.62-68
• /
• 1998

In this paper, we proposed the design of the intelligent traffic control system by using multiprocessor architecture. The inter-processor communication of the architecture is implemented by sharing the serial communication channel. In comparing the conventional traffic control system using single processor architecture, the proposed system uses multiple processors controlling the sub systems such as the signal lights, traffic measurement unit, auxiliary signal lights and peripherals. The main processor controls the communication among the processors and the communication protocol link to the central control center at remote site. The proposed architecture reduces the load and simplifies the program of each processor and enables the real time processing of the add-on features of intelligent traffic control systems. The architecture is implemented and the common channel inter-processor communications and the real time operation is experimented .experimented .

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.197.1-197.1
• /
• 2010

This study was carried out to evaluate the operating performances of the evaporation desalination system with solar energy. This system was designed to use evacuated solar collector as the heat source, supplying the required heat energy and photovoltaic power as the electric source, supplying required power to pumps in the desalination system. The 5kW photovoltaic power generation system to make the electricity, the single-stage fresh water generator with plate heat exchanger, and remote control and monitoring system. Solar desalination system was designed and installed in Jeju-island, Korea in 2006, after about 4 years of operation, usability and stability of solar desalination system was guaranteed. The system comprises of the desalination unit which was designed to have daily fresh water capacity of $2m^3$, a $120m^2$ evacuated tubular solar collector to supply the heat, a $6m^3$ heat storage tank, and a 5.2kW photovoltaic power generation to supply the electricity to hydraulic pumps for the heat medium fluids. On a clear day, average daily solar irradiance in Jeju-island was measured to be $500W/m^2$ and the daily fresh water yield showed to be more than 500 liters under this condition. After around three years of a long term operation of the system from January 2007 to August 2009, average daily freshwater yield was analyzed to be around $330{\ell}$. The relationship equation between solar irradiance and freshwater yield was found to be y=1.1806x - 107.89.

• Journal of Digital Contents Society
• /
• v.3 no.2
• /
• pp.245-254
• /
• 2002

Currently, communication field for automation system can be divided by simple serial communication for communication between each internal devices and network base remote control system that is based on TCP/IP. In spite of great development of network, communication part for internal control is using simple RS232 base until present. Also, development techniques of system developed by object oriented program in modular programming techniques of each function unit. Currently, it developed by component base development technique that is parts unit of software. This is presented by the new alternative of software development techniques as techniques to composition independent operation unit including business logic and is connected to development of new system. Therefore, this research implemented internal communication Emulate in RS232C based on GUI that apply development techniques of component base. that is, I maked component to commnication control part between receiving and sending and, as composite it, Control part did to handling between send and receive data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.417-419
• /
• 2016

Internet of things(IoT) services should be available to provide unattended operation in a remote area, long battery life, low-cost infrastructure, two-way communication platform. Urban transit in Busan is made up of the wire-based infrastructure except for voice infrastructure of transmit/receive and new data infrastructure is required for Internet of things(IoT) services. Urban transit environments in Busan were analyzed in order to apply LoRa Wireless Network(the standard communication way of IoT) and proposes a building after a Disaster Evacuation System.