• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.75-76
• /
• 2008

전력거래소는 전격계통 안정된 운영과 공정한 전력시장 운영을 주요 임무로 하며, 이를 위하여 전국의 80여개의 발전소와 600여개 변전소로부터 발전량, 전압, 조류, 자단기 상태정보 등 다양한 전력계통 자료를 취득하고 있다 전력거래소의 중앙급전소에는 이와 같은 계통자료 취득은 물론 발전량 제어기능을 수행하기 위한 에너지관리시스템(이하 EMS 라 한다)을 운영하고 있으며, 발,변전소에는 현장의 전력설비와 연결되어 계통자료를 취득하여 EMS로 전송하는 원격소장치 (이하 RTU 라한다)를 운영하고 있다. 자료취득 경로는 모든 발전소와 34skv급 이상의 변전소의 경우 EMS와 RTU가 직접 연결되어 자료를 취득하며 154Kv급 이하 변전소는 12개 지역급전소의 자료취득제어시스템(이하 SCADA라 한다)를 경유하여 자료를 취득하고 있다. 전력계통의 대형화와 복잡화에 따라 계통해석기능 자동발전제어기능에 의한 계류운영으로 정보기술에 대한 의존도가 증가하고 있으며, 변동비 반영시장의 개선운영에 따라 공정한 전력시장 운영과 안정된 전력계통 운영을 위해 전력계통 취득자료의 신뢰도가 요구되고 있다. 따라서 EMS를 비롯한 RTU, 통신망 등 전력계통 자료취득 설비의 운영실적을 분석하여 각 시스템별 고장 고장원인 고장유형 등을 고찰하므로써 시스템 성능개선을 위한 설비투자와 운영개선에 반영하고자 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.4
• /
• pp.1471-1492
• /
• 2015

The rapid development of smartphone technologies have resulted in the evolution of mobile botnets. The implications of botnets have inspired attention from the academia and the industry alike, which includes vendors, investors, hackers, and researcher community. Above all, the capability of botnets is uncovered through a wide range of malicious activities, such as distributed denial of service (DDoS), theft of business information, remote access, online or click fraud, phishing, malware distribution, spam emails, and building mobile devices for the illegitimate exchange of information and materials. In this study, we investigate mobile botnet attacks by exploring attack vectors and subsequently present a well-defined thematic taxonomy. By identifying the significant parameters from the taxonomy, we compared the effects of existing mobile botnets on commercial platforms as well as open source mobile operating system platforms. The parameters for review include mobile botnet architecture, platform, target audience, vulnerabilities or loopholes, operational impact, and detection approaches. In relation to our findings, research challenges are then presented in this domain.

• Smart Structures and Systems
• /
• v.12 no.6
• /
• pp.661-678
• /
• 2013

In this paper, a wireless sensing system for structural field evaluation and rating of bridges is presented. The system uses a wireless platform integrated with traditional analogue sensors including strain gages and accelerometers along with the operating software. A wireless vehicle position indicator is developed using a tri-axial accelerometer node that is mounted on the test vehicle, and was used for identifying the moving truck position during load testing. The developed software is capable of calculating the theoretical bridge rating factors based on AASHTO Load and Resistance Factor Rating specifications, and automatically produces the field adjustment factor through load testing data. The sensing system along with its application in bridge deck rating was successfully demonstrated on the Evansville Bridge in West Virginia. A finite element model was conducted for the test bridge, and was used to calculate the load distribution factors of the bridge deck after verifying its results using field data. A confirmation field test was conducted on the same bridge and its results varied by only 3% from the first test. The proposed wireless sensing system proved to be a reliable tool that overcomes multiple drawbacks of conventional wired sensing platforms designed for structural load evaluation of bridges.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.9
• /
• pp.64-72
• /
• 2012

The interest in wind power generation area such as developing and operating wind-diesel pilot complex in remote and island regions that have difficulty in having power plant and connecting to power system is growing rapidly in the world. We have installed and researched the hybrid system in Sekgok Pilot Complex to meet the new generation system. From the monitored data of the system, the performance of each diesel power plant is outstanding. However, step out problem was detected with respect to load sharing and synchronization with decentralized power supply. An advanced controller design having better response time and stability is needed to solve such problem. In this paper, we proposed the algorithm, through digital controller of Governor, which is applied to hybrid system. As a result, we obtained the stable frequency value in variable loading conditions. Also, we proved the advanced response time and stability through the simulation and experiment by applying additional current signal to the control algorithm.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.398-401
• /
• 2006

Dual channel Radiometer for Earth and Atmospheric Monitoring (DREAM) is the main payload on Science and Technology SATellite-2 (STSAT-2) of Korea. DREAM is two-channel microwave radiometer with linear polarization, and operating at center frequencies of 23.8 GHz and 37 GHz. An equation for DREAM calibration is derived which accounts for losses and re-radiation in the microwave components of the radiometer due to physical temperature. This paper describes the radiometric calibration equation to get antenna temperature ($T_A$) from the measured output data. At lower altitude, the measured deep space temperature is contaminated by middle atmosphere and earth radiation. In this paper, we presented the detail mathematical formulation to find the altitude up to which cold source brightness temperature is not affected by earth and middle atmosphere radiation. The DREAMPFM data is used to calculate the performance parameters (linearity, sensitivity, dynamic range, and etc.) of the system.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.748-751
• /
• 2006

Positioning accuracy by the Global Positioning System (GPS) is of great concern in a variety of research tasks. It is limited due to error sources such as ionospheric effect, orbital uncertainty, antenna phase center variation, signal multipath, and tropospheric influence. In this study, the tropospheric influence, primarily due to water vapour inhomogeneity, on GPS positioning height is investigated. The data collected by the GPS receivers along with co-located surface meteorological instruments in 2003 are utilized. The GPS receivers are established as continuously operating reference stations by the Ministry of the Interior (MOI), Central Weather Bureau (CWB), and Industrial Technology Research Institute (ITRI) of Taiwan, and International GNSS Service (IGS). The total number of GPS receivers is 21. The surface meteorological measurements include temperature, pressure, and humidity. They are introduced to GPS data processing with 24 troposphere parameters for the station heights, which are compared with those obtained without a priori knowledge of surface meteorological measurements. The results suggest that surface meteorological measurements have an expected impact on the GPS height. The daily correction maximum with the meteorological effect may be as large as 9.3 mm for the cases of concern.

• Journal of the Speleological Society of Korea
• /
• no.85
• /
• pp.28-34
• /
• 2008

For trying to frontal attack of new solution by fusion of technical tasks and conditions with it's solving methods of the essential tasks of marine resource development and environmental conservation in addition with elements of electronic high-technologies, the magnetic oil spill adsorbent of Mag-Sorbent* has been prepared and proposed to dispose oil spill from the marine disaster for preventing oil pollution by using them and their system with sequentially circular collection of oil spill mag-sorbent powder and fabrics on the electronic equipment like as barge robot for the scheme of sustainable development of environment-friendly technology. Because of recent marine accident occurred at Tae-An cost and earthquake in Sichuan province were very large scale accident of disaster to prevent and manage of them. So, it was verified from the experiment of electronic demonstrator that the skimmer system of oil spill mag-sorbent powder and fabrics prepared was very effective and useful technique to collect oil spill samples on the water surface specially at the closed space of underground cave. At this point, the barge-based electronic remote control was very useful system operating easily on the marine fields but also water level at the small pool to skim it with the environment-friendly system of the disposing marine disaster and preventing oil pollution using magnetic adsorbents of Mag-Sorbent*.

• Journal of Welding and Joining
• /
• v.34 no.5
• /
• pp.13-18
• /
• 2016

Toshiba has developed a laser peening system for PWRs(pressurized water reactors) as well after the one for BWRs(boiling water reactors), and applied it for BMI(bottom-mounted instrumentation) nozzles, core deluge line nozzles and primary water inlet nozzles of Ikata Unit 1 and 2 of Shikoku Electric Power Company since 2004, which are Japanese operating PWR power plants. Laser pulses were delivered through twin optical fibers and irradiated on two portions in parallel to reduce operation time. For BMI nozzles, we developed a tiny irradiation head for small tubes and we peened the inner surface around J-groove welds after laser ultrasonic testing (LUT) as the remote inspection, and we peened the outer surface and the weld for Ikata Unit 2 supplementary. For core deluge line nozzles and primary water inlet nozzles, we peened the inner surface of the dissimilar metal welding, which is of nickel base alloy, joining a safe end and a low alloy metal nozzle. In this paper, the development and the actual application of the laser peening system for PWR power plants will be described.

• Journal of Korea Game Society
• /
• v.12 no.6
• /
• pp.25-32
• /
• 2012

Due to the development of the digital technology, the digital broadcasting is changing to a multi-entertainment platform that can operate data (broadcasting) services (such as games, weather information, and stock trading services) as well as traditional broadcasting contents. Most of the data services, however, failed to get satisfactory results because of the inconvenience in operating the services using a TV remote controller and the failure of gaining the viewer's interests in the competition with the broadcasting contents. The paper introduces a survey on the viewer's modality of using a data service and, based on the survey result, proposes a design guideline that makes a data service minimally interrupt a viewer watching a broadcasting content.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.450-454
• /
• 1997

This system is the automatic boiler tube bending equipment which has four heads for bending the tube and the carriage for moving the tube. The system consists of two frames for transporting each moving parts, high-frequency heating equipment for heating the tube in hot bending, control panel for inputting the job data operating, remote control unit for concetration and distribution of input/output, and the monitoring system which can establish unmanned operationby receiving the bending job data via LAN form a design teamwhich produces the job data and schedule based on master production plan and diagnoses bending data change, input, whole system status, and system malfunctions. By employing this system, 30% of production improvement was achieved was achieved comparing to the existing bending system.