• Nuclear Engineering and Technology
• /
• 제36권4호
• /
• pp.346-356
• /
• 2004

14 Pressurized Water Reactors (PWR) in Korea use a remote monitoring system (RMS), which have been used in Korea since 1998. A Memorandum of Understanding on Remote Monitoring, based on Enhanced Cooperation on PWRs, was signed at the 10th Safeguards Review Meeting in October 2001 between the International Atomic Energy Agency (IAEA) and Ministry Of Science and Technology (MOST). Thereafter, all PWR power plants applied for remote monitoring systems. However, the existing method is high cost (involving expensive telephone costs). So, it was eventually applied to an Internet system for Remote Monitoring. According to the Internet-based Virtual Private Network (VPN) applied to Remote Monitoring, the Korea Atomic Energy Research Institute (KAERI) came to an agreement with the IAEA, using a Member State Support Program (MSSP). Phase I is a Lab test. Phase II is to apply it to a target power plant. Phase III is to apply it to all the power plants. This paper reports on the penetration testing of Phase I. Phase I involved both domestic testing and international testing. The target of the testing consisted of a Surveillance Digital Integrated System (SDIS) Server, IAEA Server and TCNC (Technology Center for Nuclear Control) Server. In each system, Virtual Private Network (VPN) system hardware was installed. The penetration of the three systems and the three VPNs was tested. The domestic test involved two hacking scenarios: hacking from the outside and hacking from the inside. The international test involved one scenario from the outside. The results of tests demonstrated that the VPN hardware provided a good defense against hacking. We verified that there was no invasion of the system (SDIS Server and VPN; TCNC Server and VPN; and IAEA Server and VPN) via penetration testing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2486-2488
• /
• 2003

This paper describes a remote monitoring system of temperature controller for cold-storage, of farm produce. In the cold-storage, it is important that farm produces are fresh. Unfortunately, when an operator goes out from the cold-storage temperature change could be occurred due to the various reasons, for an example, a valve of cooler is broken. The temperature change results in a serious problem of the quality of farm produce. To prevent the problem, the operator has to look to the current state of the temperature of the cold-storage, even he is in long away. Thus, the monitoring system to show the temperature should be required to the operator who can move away. Therefore, this paper propose of the remote monitoring system of the temperature. The proposed system is expected to help the operator's facilities, and the management of farm produce.

• 전자공학회논문지CI
• /
• 제47권6호
• /
• pp.93-102
• /
• 2010

기존의 웹 기반 정보 서비스 시스템은 실시간 정보제공과 응급상황에 대한 원격 지원 조치가 어렵다는 문제점들을 갖는다. 이러한 문제를 해결하기 위해서, 본 논문에서는 모바일 통신기기(휴대폰, PDA, Smart Phone, Webpad)를 이용하여 원격시스템을 관리 및 모니터링하고 실시간으로 원격지의 시스템을 제어할 수 있는 실시간 무선 원격제어 시스템을 설계 및 구현하였다. 제안하는 시스템은 원격지 예를 들어 '사무 빌딩'과 보육시설 예를 들면 '유치원'에 적용하였다. 사무 빌딩에 구현한 경우는 유선(웹 환경) 또는 무선(모바일 장비)을 통해서 건물관리 및 시스템 환경에 설치된 각종 센서정보를 실시간으로 관리 와 제어할 수 있다. 유치원 시스템에 적용한 경우는 유치원 아동의 활동을 인증된 사용자의 핸드폰으로 실시간 모니터링 할 수 있는 서비스가 제공된다. 제안한 시스템의 보안기능은 모바일장비 사용자 인증과 대상 시스템 접근제어 기능을 갖는다. 제안하는 시스템은 실시간 사용자 인증 기능과 시스템 접근제어기능을 실행하도록 하여 자원관리자와 모바일 장비 사용자의 안전성을 높이고, 중단 없는 서비스의 제공뿐만 아니라 실시간 모바일 서비스 환경을 제공한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.409-412
• /
• 2000

In this paper we have implemented CH-MUX system which provides customers with various services, i.e. POTS, ISDN, digital leased line and so on, and supports not only UDLC but IDLC network configuration based on existing optical transmission facilities. Also the RCS equipment has been designed and implemented for remote monitoring and control of CH-MUXs. And then this paper has described IPC procedure and proposed other implemental methods of IPC channel. Service providers will be able to design and construct cost-effective access network with RCS and CH-MUX systems.

• 제어로봇시스템학회논문지
• /
• 제11권8호
• /
• pp.662-668
• /
• 2005

This paper presents a realization of check valve condition monitoring system based on fault diagnosis algorithm and Fieldbus communication. We first acquired AE(acoustic emission) sensor data at the check valve test loop, extract fault features through the teamed neural network, and send the processed data to a remote site. The overall system has been implemented and experimented results are given to show its effectiveness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.618-620
• /
• 1999

The owner of metallic structures has a burden of responsibility for the protection of corrosion and the prevention against big accident such as gas explosion or collapse of bridge and building and so on. So, he has been spent the money and the time for corrosion monitoring and analysis of measuring data. Therefore, KERI(Korea Electrotechnology Research Institute) has developed the real-time wireless remote corrosion monitoring system using by TRS(Trunked Radio System). The results of development for corrosion monitoring system are described briefly. Especially, the interfacing technology between the server and rectifier introduced in this paper.

• 한국컴퓨터정보학회논문지
• /
• 제12권3호
• /
• pp.267-275
• /
• 2007

이 논문에서는 터미널 부분의 중요 신호를 유무선 방식을 통하여 통합적으로 감시, 관리하기 위한 DCS 터미널 원격 감시 시스템을 설계 및 구현한다. 시스템은 터미널 부분의 릴레이들의 동작 상태 및 퓨즈의 이상 유무를 실시간으로 감시하기 위한 보드와 각 릴레이들의 동작 상태를 실시간으로 확인이 가능하며 에러 발생 시 에러 유형을 즉시 제공하며 릴레이의 규격 및 사용기간을 고려하여 교체시기를 알려주어 DCS 터미널 원격 감시 미들웨어로 구성된다. 이 시스템은 릴레이의 고장을 쉽게 진단할 뿐만 아니라 사전에 예방함으로써 산업분야의 경제적인 효과가 기대된다.

• 한국정보기술학회 영문논문지
• /
• 제10권2호
• /
• pp.1-13
• /
• 2020

This paper presents an emergency brushless synchronous generator having rotating exciter status monitoring and protection functions. For monitoring the rotating exciter status, a wireless rotor status detector and a digital AVR(Automatic Voltage Regulator), which has a wireless communication capability, are proposed. The proposed rotor status detector detects temperatures of exciter armature and main field windings and input voltage and current of the main field. Therefore, it is possible to protect the generator from the over-temperature of windings and detect the exciter bridge diode fault. Furthermore, the proposed digital AVR has rotor status monitoring and protection function, and remote generator tuning, wireless group parallel operation function. So the operator can efficiently operate the generator using a smartphone from a remote area.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.136-143
• /
• 2005

Open architecture controller (OAC) is well known technology in factory automation. To better understand the requirements of OAC, authors have discussed the OAC related topics with a number of control experts who represents different segments of the machining industry. There is no common concept that is accepted or used, however, the common ideas for OAC is the control system that is hardware independent, interchangeable, and easily scalable. This paper presents summary of the understaning and requirements of OAC. Based on the requirements of OAC, authors developed the software based PC-CNC. The main focus of the PC-CNC was on the user customization capability and open interface between control networks in manufacturing system. This paper introduces the developed PC-CNC briefly. In addition to introduction of the PC-CNC, to fill the gap between end users and vendors of OAC, this paper presents two applications using OAC. One is a remote monitoring system. The OPC (Ole for Process Control) standard interface was used to monitor the status of open architecture CNC across network. The other is the remote production management module for machine tools using standard database interface.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.327-330
• /
• 2008

This paper presents monitoring system for 750kW-class DFIG wind turbine generator system and an architecture for applying standardized communication, IEC61400-25. Monitoring and control system is consists of wind turbine PLC, Local and Remote I/O Server, HMI. and Web-server. Proposed System has been demonstrated in Daegi-ri, Kangwon-do, which aims to test local and/or remote monitoring and control system and evaluate the performance of 750kW-class WTS. Finally we described the design of logical nodes and services based on IEC61400-25 and its application scheme.