• Korean Journal of Remote Sensing
• /
• v.38 no.4
• /
• pp.343-353
• /
• 2022

An attempt to derive the surface temperature from the Korea Multi-purpose Satellite (KOMPSAT)-3A mid-wave infrared (MWIR) data acquired over the southern California on Nov. 14, 2015 has been made using the MODerate resolution atmospheric TRANsmission (MODTRAN) radiative transfer model. Since after the successful launch on March 25, 2015, the KOMPSAT-3A spacecraft and its two payload instruments - the high-resolution multispectral optical sensor and the scanner infrared imaging system (SIIS) - continue to operate properly. SIIS uses the MWIR spectral band of 3.3-5.2 ㎛ for data acquisition. As input data for the realistic simulation of the KOMPSAT-3A SIIS imaging conditions in the MODTRAN model, we used the National Centers for Environmental Prediction (NCEP) atmospheric profiles, the KOMPSAT-3Asensor response function, the solar and line-of-sight geometry, and the University of Wisconsin emissivity database. The land cover type of the study area includes water,sand, and agricultural (vegetated) land located in the southern California. Results of surface temperature showed the reasonable geographical pattern over water, sand, and agricultural land. It is however worthwhile to note that the surface temperature pattern does not resemble the top-of-atmosphere (TOA) radiance counterpart. This is because MWIR TOA radiances consist of both shortwave (0.2-5 ㎛) and longwave (5-50 ㎛) components and the surface temperature depends solely upon the surface emitted radiance of longwave components. We found in our case that the shortwave surface reflection primarily causes the difference of geographical pattern between surface temperature and TOA radiance. Validation of the surface temperature for this study is practically difficult to perform due to the lack of ground truth data. We therefore made simple comparisons with two datasets over Salton Sea: National Aeronautics and Space Administration (NASA) Jet Propulsion Laboratory (JPL) field data and Salton Sea data. The current estimate differs with these datasets by 2.2 K and 1.4 K, respectively, though it seems not possible to quantify factors causing such differences.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.213-218
• /
• 2008

This paper describes hardware-based high speed multimedia data reassembly processor for remote multimedia Set-Top-Box(MSTB) of interactive satellite multimedia communication system. The conventional multimedia data reassembly scheme is based on software processing of MSTB. As increasing of transmission rate for multimedia data services, the CPU load of remote MSTB is increased and reassembly performance of MSTB is limited. To provide high speed multimedia data service to end user, we proposed hardware based high speed multimedia data reassembly processor. It is implemented by using an FPGA, a PCI interface chip, and RAMs. And it is integrated in MSTB and tested. It has been confirmed to meet required all functions and processing rate up to 116Mbps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1947-1957
• /
• 2015

CCN networking is one of the future internet. With the rapid development of network platforms emerged a wide range of services through a virtual network environment. The performance of CCN in the high bandwidth delay is important to provide various services between nations. We can check the high bandwidth delay product in federation. Federation between the nations has the advantage of being effective to do a various services for the users, and the remote heterogeneous physical hardware engine supports various environments. Data transmission delay can be occur in long distance network even though the network is federated network. In this paper, we propose CCN-Helper protocol for data transmission delay in ling distance networks. We connect from KREONET in Korea to iLab.t in Belgique in order to test CCNx over heterogeneous federated environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.10
• /
• pp.4703-4723
• /
• 2016

The verification of data integrity is an urgent topic in remote data storage environments with the wide deployment of cloud data storage services. Many traditional verification algorithms focus on the block-oriented verification to resolve the dispute of dynamic data integrity between the data owners and the storage service providers. However, these algorithms scarcely pay attention to the data verification charge and the users' verification experience. The users more concern about the availability of accessed files rather than data blocks. Moreover, the data verification charge limits the number of checked data in each verification. Therefore, we propose a mixed verification protocol to verify the data integrity, which rapidly locates the corrupted files by the file-oriented verification, and then identifies the corrupted blocks in these files by the block-oriented verification. Theoretical analysis and simulation results demonstrate that the protocol reduces the cost of the metadata computation and transmission relative to the traditional block-oriented verification at the expense of little cost of additional file-oriented metadata computation and storage at the data owner. Both the opportunity of data extracted and the scope of suspicious data are optimized to improve the verification efficiency under the same verification cost.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.5
• /
• pp.313-318
• /
• 2014

The remote monitoring system of water salinity was assessed in Wando reclaimed land lake during a farming season in 2009. Increasing of water salinity in this lake used to bring about salt damage on rice plant occasionally. At the early stage of the rice growing period, rice growth was not damaged due to enough rainfall with more than 120 mm from the mid-May to the first ten days of June. Data collection using on-site water salinity measuring sensors every 2 hours and real-time transmission in system were carried out for the experiment. We compared the transmitted values from the sensor system with water sample values collected and analyzed by a local technical office. Salt concentrations measured by sensor in real-time monitoring system were available data. The regression equation between rainfall and water salinity was presented as (water salinity after rainfall) = $0.621{\times}$(water salinity before rainfall)${\times}exp(-0.0139{\times}rainfall)$, ($r^2=0.579$, p<0.01). It is suggested that the system is useful for stable farming in the area where farmer use water in reclaimed lakes as an irrigation source.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.347-354
• /
• 1999

Generally, transceiver is operated to the remote control for the purpose of breading the traffic zone which is established on a mountain peak, island and building top using private line. Therefor, the remote control system of public radio station have been the very important role that is decision the quality relate to the quickness, accuracy, safety of communication on old type transceiver of SSB, VHF etc. In the case of using the only 1 private line which is exchanged voice signal with data signal had mixed or interrupted for up/down of channel, PTT control and monitoring of transmission channel and power. The up/down of channel and PTT control is according to the ASK and the data of monitoring is transfered to the FSK modulation, additional algorithm is studied on the serial protocol and traffic sequence using the MCS-51 processor in the simplex communication methode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.8
• /
• pp.796-804
• /
• 1992

This paper presents a design of a backbone network which uses a rigister-Insertion ring structure, The introduction of a high speed register in sertton backbone ring enables high performance inter-network 4ommunicatlons In a simple and modular structure at low cost and Its concurrent communications.. Two or more bridge nodes can be used to construct a register Insertion backbone ring network. The high bandwidth of the backbone ring sup ports heavy traffic for Inter-segment Eornrnunicatlons. The bridge node does both local address filtering to block data entering the ring and remote address filtering to block data entering the local LAN segment . Title local address greatly reduces the rate on the backbone ring and the remote address filterlng greatly reduces the traffic rate on each LAN segment. An feature makes the network the network reconflguratlon simpler and transparent to users. A throughput analysis Is used to deterrune the bandwidth of the backbone rlr)g transmission medium.

• Korean Journal of Remote Sensing
• /
• v.18 no.1
• /
• pp.53-59
• /
• 2002

The MSC is a payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a GSD(Ground Sample Distance) of 1 m over the entire FOV(Field Of View) at altitude 685 km. The instrument is designed to haute an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/offset and on-board image data compression/storage. The MSC instrument has one channel for panchromatic imaging and four channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI(Time Belayed Integration) CCD(Charge Coupled Device) FPA(Focal Plane Assembly). The MSC hardware consists of three subsystem, EOS(Electro Optic camera Subsystem), PMU(Payload Management Unit) and PDTS(Payload Data Transmission Subsystem) and each subsystems are currently under development and will be integrated and verified through functional and space environment tests. Final verified MSC will be delivered to spacecraft bus for AIT(Assembly, Integration and Test) and then COMSAT-2 satellite will be launched after verification process through IST(Integrated Satellite Test). In this paper, the introduction of MSC, the configuration of MSC electronics including electrical interlace and design of CEU(Camera Electronic Unit) in EOS are described. MSC Operation parameters induced from the operation concept are discussed and analyzed to find the influence of system for on-orbit operation in future.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.17-23
• /
• 1999

The wire and/or wireless data communication system for anti-disaster system of natural gas governor station was developed. In oder to prevent accidents of governor station, the operator was replaced by RTU(Remote Terminal Unit) which gather and transmit safety situation of governor station. The database and MMI(Man Machine Interface) were also developed to analyze the situation of governor station. The data communication between server and RTU was designed to switch automatically from wire to wireless communication and vice versa when one of them failed communication. We also have developed the patrol car management system which was applied GPS(Global Position System)/GIS(Geometric Information System), and the earthquake detection/transmission system which was adopted three dimension acceleration sensor. When a earthquake may occur, the earthquake detection/transmission system monitors data such as PGA(Peak Ground Acceleration), Sl(Spectrum Intensity) and orders the emergency shutoff valve close immediately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1805-1810
• /
• 2014

The phase noise spectrum distribution for remote controller using the BPSK mode and low data rate of 50 kbps was designed and proposed in this paper. In case of applying the BPSK that transmission performance is superior to FSK method, the performance degradations due to phase noise are generated. To minimize the phase noise effect, it is important to dispatch the digital signal in channel environment with required phase noise characteristics. To provide the terminal design technique and the proper channel environment with required phase noise characteristics, the phase noise spectrum distribution was designed for required phase noise characteristics. By analyzing the phase noise effects for damping factor and noise bandwidth of the carrier recovery circuit, the phase noise spectrum design that consider the damping factor and noise bandwidth was performed. Based on the IESS-308 standards, also, the phase noise effects was analyzed. The phase noise spectrum design techniques and phase noise spectrum that is suitable to remote controller were proposed.