• 한국지능시스템학회논문지
• /
• 제24권5호
• /
• pp.489-494
• /
• 2014

본 논문에서는 무인차량용 다중채널 무선원격 제어시스템의 설계방안을 제안한다. 기존의 무선원격 제어시스템은 단일 제어채널로 구성되어 제어채널에 고장이 발생하였을 때 응급대처가 불가능한 문제점이 있다. 따라서 휴대용 무선원격 제어기와 스테이션용 무선원격 제어로 구성되는 다중채널 무선원격시스템을 제안한다. 무인차량용 다중채널 무선원격 제어시스템을 개발하기 위하여 휴대용 무선원격 제어기와 휴대용 무선원격 제어기를 설계 및 개발하였다. 개발한 무선원격 제어시스템의 성능을 확인하기 위하여 무인차량에 적용하여 주행 실험을 실시하였다. 무선원격제어기의 고장 시 휴대용 무선원격제어기를 이용한 비상정지 실험과 휴대용 무선원격제어기의 고장 시 스테이션용 원격제어시스템을 이용한 비상정지 실험을 실시한 결과 모두 만족하는 비상정지 성능을 발휘함을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.776-778
• /
• 1997

We propose a remote controller for a SCARA typed direct drive manipulator with two degrees-of-freedom(DOF). A remote controller system for SCARA robot of DDA is designed using a 2 DSP (TMS320c31) board and Winsock(Internet program class library supplied by Microsoft). The design objective of the system is to implement real time dynamic control algorithms which have been tested only by simulations so far and remote control regardless of the distance between user and robot. Because this system runs on Win95, we developed a VxD program to communicate with DSP controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.246-248
• /
• 2005

The power plants have a loading dock and unloading device for the diverse kinds of fuel such as the bituminous coal and natural gas imported by the sea from all over the world. To unload the coal in the ship not only in the environment-friendly manner but also in the cost-effective way, the new type of heavy equipment loaded with additional features as well as excavator and the remote controller to maneuver this equipment are developed. This heavy equipment, which can be used to unload the coal in the ship in conjunction with CSU (Continuous Ship Unloader), and the remote controller are endorsed by the related code and laws. With the remote controller, the field workers can operate the unloading equipment at the remote place far from the equipment as well as in the cabin for themselves without tile remote controller.

• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.53-59
• /
• 2020

This paper describes the design of a remote control device that can control the ON/OFF state of multiple air compressors using wireless communication. The main remote controller and air compressor remote controller were designed using a microprocessor (ATmega128), and the circuit diagram was configured to wirelessly communicate using A Zigbee module between the two remote controllers. The result of the measurement of wireless communication distance between the two remote controllers was more than 1.1 km.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.412-415
• /
• 1999

In this paper, we describe an implementation of the B-Link bus interface logic for a directory controller and a remote access cash controller in the SCI-based CC-NUMA multimedia server developed by ETRI . The CC-NUMA multimedia server is composed of a number of Pentium III SHV nodes and a SCI interconnection network. To communicate with remote nodes, each node has a CC-Agent which consists of a processor bus interface(PIF). a directory controller(DC), a remote access cash controller(RC), and two SCI 1ink controllers(LCs). The B-Link bus interface logic is developed for a directory controller and a remote access cash controller in order to communicate with a SCI link controller on a B-Link bus. It consists of a sending master controller a receiving slave controller, and asynchronous data buffers. And It performs a self-arbitration, a data packet transmission, a queue allocation, an early terminal ion. and a cut-through data path.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.61-64
• /
• 1999

In this paper, a technique to expand the Input and Output (I/O) of the programmable logic controller (PLC) using remote I/O module is presented. The controller and the remote I/O module should have the same protocol and are interfaced through RS 485. Each remote I/O module consists of 16 digital input and 16 digital output, and the maximum of 32 remote I/O module can be linked to one controller. The remote I/O is programmed for interrupt request to controller independently. Therefore, there is no affect to the scan time of the controller. Using this technique, the PLC can be efficiently applied to the several hundred meters different control points such as the ON-OFF control fur the agriculture farm, the building automation system, a multi group of machine control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1743_1744
• /
• 2009

In this paper, we propose a double network control approach for linear systems. Generally, there are two network control system structures: the direct structure and the hierarchical structure. Here, the hierarchical structure consists of a main controller and a remote controller. The network delay of the structure only appears in the closed loop between the main controller and the remote system. However, the delay can exist between the remote controller and the actuator. Therefore, we design the double network system with delays between the main controller and the remote system, and the remote controller and the actuator. Finally, we carry out simulations on the linear system to illustrate the effectiveness of the proposed control method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1737-1738
• /
• 2007

An intelligent remote controller for 3-D TV interface exploits an artificial system of human visual attention for an easy interaction.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2005년도 추계 학술발표대회 논문집
• /
• pp.2-3
• /
• 2005

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.613-620
• /
• 2013

A new remote control algorithm for a mobile robot is proposed, where a remote controller consists of a camera and inertial sensors. Initially the relative position and orientation of a robot is estimated by capturing four circle landmarks on the plate of the robot. When the remote controller moves to point to the destination, the camera pointing trajectory is estimated using an inertial navigation algorithm. The destination is transmitted wirelessly to the robot and then the robot is controlled to move to the destination. A quick movement of the remote controller is possible since the destination is estimated using inertial sensors. Also unlike the vision only control, the robot can be out of camera's range of view.