• Journal of the Korean earth science society
• /
• v.36 no.1
• /
• pp.109-124
• /
• 2015

A novel approach, hybrid surface rainfall (KNU-HSR) technique developed by Kyungpook Natinal University, was utilized for improving the radar rainfall estimation. The KNU-HSR technique estimates radar rainfall at a 2D hybrid surface consistings of the lowest radar bins that is immune to ground clutter contaminations and significant beam blockage. Two HSR techniques, static and dynamic HSRs, were compared and evaluated in this study. Static HSR technique utilizes beam blockage map and ground clutter map to yield the hybrid surface whereas dynamic HSR technique additionally applies quality index map that are derived from the fuzzy logic algorithm for a quality control in real time. The performances of two HSRs were evaluated by correlation coefficient (CORR), total ratio (RATIO), mean bias (BIAS), normalized standard deviation (NSD), and mean relative error (MRE) for ten rain cases. Dynamic HSR (CORR=0.88, BIAS= $-0.24mm\;hr^{-1}$, NSD=0.41, MRE=37.6%) shows better performances than static HSR without correction of reflectivity calibration bias (CORR=0.87, BIAS= $-2.94mm\;hr^{-1}$, NSD=0.76, MRE=58.4%) for all skill scores. Dynamic HSR technique overestimates surface rainfall at near range whereas it underestimates rainfall at far ranges due to the effects of beam broadening and increasing the radar beam height. In terms of NSD and MRE, dynamic HSR shows the best results regardless of the distance from radar. Static HSR significantly overestimates a surface rainfall at weaker rainfall intensity. However, RATIO of dynamic HSR remains almost 1.0 for all ranges of rainfall intensity. After correcting system bias of reflectivity, NSD and MRE of dynamic HSR are improved by about 20 and 15%, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1167-1174
• /
• 2009

In the monitoring of a patient in a sickroom, not only the physiologic and environmental data of the patient, which is automatically measured, but also the clinical data(clinical chart)of the patient, which is drew up by a doctor or nurse, are recognized as important data. However, since in the current environment of a sickroom, clinical data is collected being divided from the data that is automatically measured, the two data are used without an effective integration. This is because the integration of the two data is difficult due to their different collection times, which leads the reconstruction of clinical data to be remarkably uncertain. In order to solve these problems, a method to synchronize the continuous environmental data of a sickroom and clinical data is appearing as an important measure. In addition, the increase of use of small machines and the development of solutions based on wireless communications provide a communication platform to the developers of health care. Thus, this paper realizes a remote system for taking care of patients based on a web that uses mobile phones. That is, clinical data made by a nurse or doctor and the environmental data of a sick room comes to be collected by a collection module through a wireless sensor network. An observer can see clinical data and the environmental data of a sickroom through his/her mobile phone, integrating and storing his/her data into the database. Families of a patient can see clinical data made by hospital and the environment of the sick room of the patent through their computers or mobile phones outside the hospital. Through the system,hospital can provide better medical services to patients and their families.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.29-40
• /
• 2022

This study uses the bidet 4D double diamond design process model to propose an improvement for "senior-oriented bidet product service design" that reflects the characteristics and needs of seniors. This study was based on the product service system concept. To this end, qualitative research on seniors was conducted to derive user value factors, and, based on this, product service ideas were discovered, and a prototype reflecting the usefulness review of a working-level expert group was proposed. First, a "smart application service for user-customized function setting guide" was proposed. A bidet incorporating Internet of Things technology and a smart phone are linked to provide an app service that automatically interprets user characteristic information and information on bidet products to guide customized functions. Second, a control panel and remote control user interface to "user-oriented product service interface" was proposed. In consideration of the usability and cognitive ability of seniors, a simple and intuitive physical user interface such as a configuration centered on main functions, button arrangement according to task sequence, and a touch screen remote control was presented. Third, we proposed a "bidet care service linked with products and health/hygiene care" that provides a wide range of services such as user health and hygiene, cleanliness, entertainment, etc., in addition to regular bidet product service. This study proposed a product-based service design methodology that can improve user experience and relationship quality by discovering and improving the pain points and needs of users (seniors) in the process of using bidet products (before, during, and after use).

• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.63-69
• /
• 2017

This study is about the development of a smart bed control system to be able to detect the human position and body signal on bed. The main control board in the bed control system consists of the human sensing part, motor driving part and MCU. Here, to increase the credibility to check the human presence on bed, the human sensing part is combined with the human position part by membrane sensor and the body-signal detecting part of EMFI sensor. Also, remotely connecting the two detected signal to the application program of the app mode makes it possible to monitor human information on bed. In this paper, the remote function monitoring of the on-bed human information by bluetooth communication will be abe to make it applicable to the technical prevention method of the bed fall and absence accident in hospital and care facilities.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.7-10
• /
• 2006

Four programs, i.e. TRMM, ADEOS2, ASTER, and ALOS are going on in Japanese Earth Observation programs. TRMM and ASTER are operating well, and TRMM operation will be continued to 2009. ADEOS2 was failed, but AMSR-E on Aqua is operating. ALOS (Advanced Land Observing Satellite) was successfully launched on $24^{th}$ Jan. 2006. ALOS carries three instruments, i.e., PRISM (Panchromatic Remote Sensing Instrument for Stereo Mapping), AVNIR-2 (Advanced Visible and Near Infrared Radiometer), and PALSAR (Phased Array L band Synthetic Aperture Radar). PRISM is a 3 line panchromatic push broom scanner with 2.5m IFOV. AVNIR-2 is a 4 channel multi spectral scanner with 10m IFOV. PALSAR is a full polarimetric active phased array SAR. PALSAR has many observation modes including full polarimetric mode and scan SAR mode. After the unfortunate accident of ADEOS2, JAXA still have plans of Earth observation programs. Next generation satellites will be launched in 2008-2012 timeframe. They are GOSAT (Greenhouse Gas Observation Satellite), GCOM-W and GCOM-C (ADEOS-2 follow on), and GPM (Global Precipitation Mission) core satellite. GOSAT will carry 2 instruments, i.e. a green house gas sensor and a cloud/aerosol imager. The main sensor is a Fourier transform spectrometer (FTS) and covers 0.76 to 15 ${\mu}m$ region with 0.2 to 0.5 $cm^{-1}$ resolution. GPM is a joint project with NASA and will carry two instruments. JAXA will develop DPR (Dual frequency Precipitation Radar) which is a follow on of PR on TRMM. Another project is EarthCare. It is a joint project with ESA and JAXA is going to provide CPR (Cloud Profiling Radar). Discussions on future Earth Observation programs have been started including discussions on ALOS F/O.

• Journal of Acupuncture Research
• /
• v.22 no.6
• /
• pp.141-153
• /
• 2005

Objectives : This survey was accomplished to find out how Korean medical doctors take acupuncture treatment in real clinics. Methods : The survey questions were developed by the consensus from the professors who major in acupuncture and moxibustion. The questionnaire was given the 2731 Korean medical doctors at the mending education site; In addition, it was given to 793 doctors working at the 105 Korean medical hospitals listed on the National Korean Medical Hospital Associations Address book by postal mail; and also it was given to the 142 public health care Korean medical doctors who attended the conference for the municipal and provincial representatives of the public health service Korean medical doctors. Total of 1277 questionnaires were retrieved out of the 3666 subjects. Results : 1. Nine hundred out of 1277 Korean medical doctors used method of differentiation syndromes(70.4%) and 1184 out of 1277 Korean medical doctors convalescence decide with subjective symptom improvement of patient(92.6%). 2. Nine hundred eight out of 1277 Korean medical doctors used both local and remote points(71.0%) and 916 out of 1277 Korean medical doctors treat with method of reinforcement-reduction(71.7%). 3. Eleven hundred fifth five out of 1277 Korean medical doctors used cupping a boil(90.3%) and 1023 out of 1277 Korean medical doctors used moxibustion(80.1%). Conclusion : When Korean medical doctors treat with acupuncture, most of them diagnose with differentiation methods and meridian theory, decide convalescence with subjective symptom improvement of patient, select out of both local and remote acupuncture points, treat with method of basic reinforcement-reduction, apply moxa and cupping a boil when they are necessary. The cupping a boil comes to be used when being muscle and joint disease. The moxa comes to be used when being chronic disease.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.629-631
• /
• 2015

Recently, the actual demand for electricity usage to out of demand forecasting demand appears to be based on the power of Government to address the insecurity is there are a lot of efforts on a more efficient energy management. In 2011, the first major outage, blackout since the current rate of no more than 10% of our power plants, such as power supply and demand crisis is being repeated. In addition, energy management systems, the demand for care and social areas are being expanded. In this paper, Building power supply and wired/wireless router and to optimize the DDNS (Dynamic Domain Name Service) for remote control and monitoring device for electric consumption Presonal Energy Management System offers a way to implement it. In the future, remote control and access the user's can minimize the settings for additional research is needed.

• Journal of Internet Computing and Services
• /
• v.9 no.2
• /
• pp.35-42
• /
• 2008

Mobile IP is a solution to support mobile nodes, however, it does not handle NEtwork MObility (NEMO). The NEMO Basic Support (NBS) protocol ensures session continuity for all the nodes in the mobile network. Since the protocol is based on Mobile IP, it inherits the same fundamental problem such as tunnel convergence, when supporting the multicast for NEMO. In this paper, we propose the multicast route optimization scheme for NEMO environment. We assume that the Mobile Router (MR) has a multicast function and the Nested Mobile Router Information (NeMRI) table. The NeMRI is used to record o list of the CoAs of all the MRs located below it. And it covers whether MRs desire multicast services. Any Route Optimization (RO) scheme can be employed here for pinball routing. Therefore, we achieve optimal routes for multicasting based on the given architecture. We also propose cost analytic models to evaluate the performance of our scheme. We observe significantly better multicast cost in NEMO compared with other techniques such as Bi-directional Tunneling, Remote Subscription, and Mobile Multicast based on the NBS protocol.

• Korea Journal of Hospital Management
• /
• v.27 no.2
• /
• pp.34-43
• /
• 2022

Objective: Telemedicine service is gaining importance in remote military areas. This study aimed to explore the mediating effect of user satisfaction on the association between military telemedicine service's quality and customer loyalty. Methods: The research data comprised the results of a satisfaction survey on 1,116 military telemedicine satisfaction surveys conducted from November 1 to November 31, 2021. T-tests and ANOVA were analyzed to confirm the difference in satisfaction and loyalty according to the general characteristics of the study subjects. User satisfaction, customer loyalty, and mediating effects were analyzed using multiple linear regression analysis. Results: Among the study subjects, 458 were affiliated with the Army, 68 with the Navy, and 36 with the Air Force. Among the quality of telemedicine service, tangibility, reliability, and empathy affected user satisfaction while reliability and empathy affected customer loyalty. Since the standardized coefficient beta of empathy was 0.150 (P=0.018), it was confirmed that it significantly affected customer loyalty by mediating user satisfaction. Conclusion: The telemedicine service's quality affects users' satisfaction and customer loyalty. Moreover, there was the mediating effect of user satisfaction on the association between telemedicine service and customer loyalty. Therefore, the reliability and reliability of the current telemedicine service can be improved through the replacement of outdated equipment and performance improvement, expansion of medicines in telemedicine units, and improvement of medical services through periodic CS education to increase the customers' satisfaction and loyalty.

• Journal of the Korea Convergence Society
• /
• v.13 no.1
• /
• pp.387-398
• /
• 2022

This paper presents a system that remotely monitors lone seniors at home and promptly alarms caregivers to recommend appropriate medical care services upon detecting abnormal behavior and critical conditions such as collapsing, excessive coughing, degradation of sleep quality, fever, and unusual indoor moving lines. Our system offers contactless monitoring techniques based on heterogeneous IoT sensors and deep learning to minimize the disruption to lone senior's daily life. In addition to the design and implementation of the sensor data collection and analysis system, we share our experience in installation, deployment, configuration, maintenance of the system through the case study conducted on the actual lone seniors living in Seoul Metropolitan. Based on our research, we recommend further development directions to prepare for the nationwide expansion of our system.