• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.20-24
• /
• 2007

센서의 광학 해상력에 따라 센서에 도달하는 에너지의 앙은 영상의 화소값으로 변환되므로，이 관계는 위성 영상의 정량적인 광학적 특성을 이해하기 위한 바탕이 되며，영상의 질을 유지하기 위한 척도가 되기도 한다. 위성영상의 광학적 특성은 ON 값 을 실제 지표물의 반사에너지 값인 Radiance와 Reflectance로 의 변환을 통하여 추정할 수 있으며，이러한 과정을 절대복사보정(Absolute Radiometric Calibration) 이라고 한다. 절대복사보정 과정에서 센서에 도달하는 태양 에너지의 양을 추정하기 위하여 복사전달모델이 사용된다. 태양 에너지가 대기를 통과함에 따라 여러 가지 상호 작용이 일어나게 되므로 복사 전달모델을 사용하기 위해서는 다양한 입력 변수가 필요하게 된다. 이러한 입력 변수로는 지표물의 반사율， 대기자료，그리고 센서의 특성 등이 포함되며， 이 연구에서는 KOMPSAT-2 위성의 MSC 영상의 절대복사보정 과정에서 복사전달모델의 결과에 영향을 미치는 입력 변수의 특성을 살펴보고자 한다.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.100-103
• /
• 2008

COMS(Communication, Ocean and Meteorological Satellite) has multiple payloads; Meteorological Image(MI), Ocean Color Imager(GOCI) and Ka-band communication payloads. MI has 4 IR and 1 visible channel. In order to improve the quality of IR image, two calibration sources are used; black body image and cold space look data. In case of COMS, the space look is performed at 10.4 degree away from the nadir in east/west direction. During space look, SUN or moon intrusions are strictly forbidden, because it would degrade the quality of collected IR channel calibration data. Therefore we shall pay attention to select space look side depending on SUN and moon location. This paper proposes and discusses a simple and complete space look side selection logic based on SUN and moon intrusion event file. Computer simulation has been performed to analyze the performance of the proposed algorithm in term of east/west angular distance between space look position and hazardous intrusion sources; SUN and moon.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.231-235
• /
• 1998

We have made the cross calibration in terms of space reflectance between POLDER and OCTS sensors on board ADEOS satellite, using the POLDER and OCTS data acquired simultaneously on April 24, 1997. The space reflectance values for the same target computed from the POLDER and OCTS data are in very good agreement, when we adopted the new calibration coefficients of OCTS suggested by the vicarious experiment by NASDA. Then, we estimated aerosol parameters for several target areas (two areas in the Sea of Japan and three in the Pacific Ocean) from ADEOS/POLDER's directional reflectance and polarization data in 760nm and 865nm bands. A single atmospheric layer model with an isotropic Gaussian type ocean surface (Cox-Munk model) was assumed in this study.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_1
• /
• pp.485-496
• /
• 2022

This study is for the software implementation to generate atmospheric and surface reflectance products from RapidEye satellite imagery. The software is an extension based on Orfeo Toolbox (OTB) and an open-source remote sensing software including calibration modules which use an absolute atmospheric correction algorithm. In order to verify the performance of the program, the accuracy of the product was validated by a test image on the Radiometric Calibration Network (RadCalNet) site. In addition, the accuracy of the surface reflectance product generated from the KOMPSAT-3A image, the surface reflectance of Landsat Analysis Ready Data (ARD) of the same site, and near acquisition date were compared with RapidEye-based one. At the same time, a comparative study was carried out with the processing results using QUick Atmospheric Correction (QUAC) and Fast Line-of-sight Atmospheric Analysis of Spectral Hypercubes (FLAASH) tool supported by a commercial tool for the same image. Similar to the KOMPSAT-3A-based surface reflectance product, the results obtained from RapidEye Extension showed accuracy of agreement level within 5%, compared with RadCalNet data. They also showed better accuracy in all band images than the results using QUAC or FLAASH tool. As the importance of the Red-Edge band in agriculture, forests, and the environment applications is being emphasized, it is expected that the utilization of the surface reflectance products of RapidEye images produced using this program will also increase.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.95-101
• /
• 1997

A smart pressure measurement system is described, which provides a precise A/D conversion and is highly suitable for communication with microprocessors. In order to avoid unstable problems of remote pressure sensing we have developed a new interface board which performs the A/D conversion and smart signal processing of the measured pressure data. Serial communication software which is based on ASCII code commands is also developed to process initial setup and calibration functions as well as multi-drop communication with PC. The test and evaluation of the proposed system has been shown as having the better performance compared to the other types of existing pressure measuring systems and will give good applications to the industrial use where a highly precision remote sensing is needed.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.462-467
• /
• 1999

In this paper, very high performance millimeter-wave radiometer of 92 GHz is presented. Radiometer system design, brightness temperature measurement and calibration methods are described. The architecture of radiometer including data acquisition, storage and digital signal processing using a notebook computer are explained and some experimental data in the laboratory are introduced. The system noise figure and total gain of implemented radiometer are 12 dB and 56 dB, respectively. The system stability is evaluated from the experiment. The difference of the detector output voltage for two targets, whose brightness temperature are 80 K and 300K, is 4 mV. The mechanical scanning method is considered to get a brightness temperature Image of the earth surface scene.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.92-98
• /
• 2003

A wind turbine monitoring system is essential equipment fur the performance evaluation and mechanical load analysis of a wind turbine. A monitoring system using LabVIEW is developed in this study. This system monitors signals from a meteorological mast, wind turbine generator, and tower. The discrete signals which are sampled at t Hz are automatically saved on a data file in the unit of a day. Besides these basic functions, the developed monitoring system has the other several capabilities. One of them is the information access from a remote PC through the internet. A vision image of the test site area and data files that are produced by LabVIBW software can be uploaded to the main computer located in a remote site. An emergency backup system using UPS fur the power loss on the monitoring HW is also prepared, A detail explanation for the developed wind turbine monitoring system is presented in this study.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.425-427
• /
• 2004

Motivation of this study is based on these two aspects: geologic uses of ASTER and application scheme of Spectral Mixture Analysis. This study aims at geologic mapping for mineral exploration using ASTER and LANDSAT 7 ETM+ at Mongolian plateau region by SMA. After basic pre-processing such as the normalization, geometric corrections and calibration of reflectance, related to endmembers selection and spectral signature deviation, both methods using spectral library and using PPI(Pixel Purity Index) are performed and compared on a given task. Based on these schemes, SMA is performed using LANDSAT 7 ETM+ and ASTER image. As the results, fraction map showing geologic rock types are enough to meet purposes such as geologic mapping and mineral potential mapping in the case of both uses of these different types of remotely sensed images. It concluded that this approach based on SMA with LANDSAT and ASTER is regarded as one of effective schemes for geologic remote sensing.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.530-532
• /
• 2007

Multi-Spectral Camera(MSC) is a main payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The MSC instrument has one(1) channel for panchromatic imaging and four(4) channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI CCD Focal Plane Array (FPA). The compression method on KOMPSAT-2 MSC was selected and used to match EOS input rate and PDTS output data rate on MSC image data chain. At once the MSC performance was carefully handled to minimize any degradation so that it was analyzed and restored in KGS(KOMPSAT Ground Station) during LEOP and Cal./Val.(Calibration and Validation) phase. In this paper, on-orbit image data chain in MSC and image data processing on KGS including general MSC description is briefly described. The influences on image performance between on-board compression algorithms and between performance restoration methods in ground station are analyzed and discussed.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.161-166
• /
• 2003

Hyperspectral imagery have high spectral resolution and provide the potential for more accurate and detailed information extraction than any other type of remotely sensed data. In this paper, the "Linear Spectral Unmixing" model which is one solution to overcome the limit of spatial resolution for remote sensing data was introduced and we applied the algorithm to hyperspectral image. The result was not good because of some problems such as image calibration and used endmembers. Therefore, we analyzed the cause and had a search for a solution.