• 제목/요약/키워드: Remez exchange algorithm

검색결과 9건 처리시간 0.025초

제한된 Remez Exchange 알고리즘을 이용한 고속 IIR 필터 (High-Speed IIR Filter Using Constrained Remez Exchange Algorithm)

  • 김대익;태기철;정진균
    • 한국통신학회논문지
    • /
    • 제28권8C호
    • /
    • pp.821-826
    • /
    • 2003
  • 본 논문에서는 IIR 필터의 임계 경로를 줄이기 위하여 제한된 Remez exchange 알고리즘을 제안하였다. 제안된 알고리즘은 Remez exchange 알고리즘과 최소 자승법을 이용하였다. IIR 필터 구현 예제에서 제안된 방법이 속도를 최대 20% 증가시킴을 보였다.

Performance of SDR-Based Digital-IF Channelization for Dual-Band DS-CDMA System in Wideband Multipath Channel

  • jeon, Jun-Soo
    • Journal of information and communication convergence engineering
    • /
    • 제2권4호
    • /
    • pp.205-208
    • /
    • 2004
  • In this paper, we analyzed the performance of SDR-based dual-band CDMA system in wideband multipath channel employing RAKE receiver with MRC diversity. For the simulation of SDR-based dual-band CDMA system, we used digital IF techniques, polyphase analysis filter bank as channelizer. Also, Remez exchange algorithm is employed in the realization of the digital filter in the polyphase analysis filter bank. For performance analysis of dual-band CDMA system, we consider power loss of IF signal after passing through channel and the filter. Also, the performance for different sampling rates is analyzed.

DQSM 알고리즘을 이용한 다중채널 FIR디지탈 필터의 구성 (Multi-Channel FIR Digital Filter Hardware Implementation using DQSM Algorithm)

  • 임영도;김명기
    • 한국통신학회논문지
    • /
    • 제11권3호
    • /
    • pp.217-226
    • /
    • 1986
  • DQSM알고리즘을 이용하여 다중채널 FIR디지털 필터를 구성하기 위한 한 기법을 제안하였다. 본 논문에서는 Double precision 알고리즘과 절대치회로를 이용하여 ROM용량을 감소시키고 절대치회로의 논리레벨의 단계를 줄이므로 동작속도를 개선할 수 있었다. 위의 기법으로 구성된 4채널 FIR디지탈필터의 주파수응답은 Remez exchange 알고리즘으로 시뮬레이션하여 얻어진 주파수응답과 잘 일치하였다.

  • PDF

고집적, 저전력 특성을 갖는 저잡음 IIR 필터 설계 (Design of low-noise II R filter with high-density and low-power properties)

  • 배성환;김대익
    • 정보처리학회논문지A
    • /
    • 제12A권1호
    • /
    • pp.7-12
    • /
    • 2005
  • Scattered look-ahead (SLA) 파이프라인 방법은 디지털 IIR 필터의 고속 또는 저전력 응용분야에 효율적으로 사용된 수 있다. 그러나 이 방법을 통하여 파이프라인된 필터의 안정성이 보장될 수 있지만 필터의 극점들이 임계지역에 밀집될 때에는 큰 라운드오프 잡음에 영향을 받게 된다. 파이프라인된 필터에서 밀집된 극점들을 피하기 위해 수정된 Remez exchange 알고리즘과 최소 자승법을 이용하여 극점의 각도와 반지름을 제한한 IIR 필터 설계 방식을 제안하였으며, 그 결과 향상된 주파수 응답과 감소된 계수 민감도를 얻을 수 있었다. 또한 모의실험 결과를 통하여 제안된 방법이 일반적인 방법에 비해 $33{\%}$의 면적감소와 $45{\%}$의 전력을 감소시킴을 확인하였다.

최소자승오차 알고리즘을 이용한 2차원 FIR 디지털필터설계 (A Study on the Design of Two-Dimensional FIR Digital Filters using Least-Square Error Algorithm)

  • 구기준;조병하;이두수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
    • /
    • pp.285-289
    • /
    • 1988
  • This paper suggests the way to improve the impulse response characteristics in 1-D and 2-D FIR digital filters design. The proposed a Least Square($L_2$) error algorithm of kaiser window is the better than $L_2$ error of the Remez Exchange(R.E.)algorithm.

  • PDF

파이프라인된 IIR 필터의 저잡음 VLSI구현 (Low-noise VLSI Implementation of Pipelined IIR Filters)

  • 태기철;최정필;신승철;정진균
    • 한국통신학회논문지
    • /
    • 제25권4B호
    • /
    • pp.788-795
    • /
    • 2000
  • SLA(Scattered look-ahead) 파이프라인 방법은 IIR 필터의 고속/저전력 응용에 효율적으로 쓰여질 수 있다. 그러나 이 방법은 파이프라인된 필터의 안정성을 보장할 수 있지만, 필터의 극점들이 어느 임계지역에 밀집될 때 큰라운드 오프 노이즈 영향을 받게 된다. 이러한 문제점을 해결하기 위해 제약된 Remez exchange 알고리즘을 이용하는 저잡음 구현 기술이 제안되었으며 이 방법에서는 극점들이 밀집되는 것을 피하기 위해 임계지역에 위치한 극점들의 각을 제약하여 원하는 필터의 스펙트럼을 얻는다. 본 논문에서는 제약된 각을 가지는 극점들의 반지름을 극점이 움직이는 방향에 따라 최적화하는 알고리즘을 제안하고 제안한 방법에 의해 향상된 스펙트럼 특성 또는 라운드오프 노이즈 영향의 감쇄 효과를 얻을 수 있음을 보인다.

  • PDF

선형 위상 IIR나이퀴스트 필터의 설계 방법 (A Method for Designing Linear Phasee IIR Nyquist Filters)

  • 맹승주;이병기
    • 전자공학회논문지B
    • /
    • 제31B권12호
    • /
    • pp.11-19
    • /
    • 1994
  • In this paper, we propose a new method to desing IIR Nyquist filters. By thismethod, we can design IIR nyquist filters which prossess linear phase characteristics andare lower in order than FIR Nyquist filters. WE derive expressions for zero-phased IIR Nyquist filters and propose new desing methods for them. An iteration process is used to design the proposed IIR Nyquist filter, and in each iteration step a modified version of the Remez exchange algorithm is used. Finally, the propose desing method is demonstrated through design examples.

  • PDF

CDMA 휴대전화기용 IF 표면탄성파 필터의 설계 및 제작 (Design and fabrication of IF SAW filter for CDMA cellular phone system)

  • 양형국;조현민;박종철
    • 전자공학회논문지D
    • /
    • 제35D권4호
    • /
    • pp.32-39
    • /
    • 1998
  • Remez exchange algorithm was applied to realize an IF SAW filter for CDMA cellular phone systems. A SAW filter with withdrawal weighted transducers was simulated and then fabricated on 42.75.deg. ST-cut Quaritz wafer. Excellent agreement wasobtained between calculated andmeasured responses. Fabricated SAWfilterswere mounted on ceramic SMD package for reducing their size and volume. SAW filters were measured under matched circuit. As a result, 5 dB bandwidth of 1.32 MHz, 33dB bandwidth of 1.76 MHz, insertion loss of 13.8 dB and peak to peak ripple at passband of 0.26 dB were obtained. Linear group delay responses at passband were also obtained. These characteristics were good for practical use of IF SAW filter for CDMA system.

  • PDF

PERFORMANCE ANALYSIS OF SDR-BASED DIGITAL-IF CHANNELIZATION FOR DUAL-BAND CDMA SYSTEM IN WIDEBAND MULTIPATH CHANNEL

  • Hong, Cheong-Ho;Park, Dae-sil;Cheong, Ho-seop;Kim, Cheol-Sung;Lee, Mike-Myung-Ok
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -3
    • /
    • pp.1713-1716
    • /
    • 2002
  • In this paper, we analyzed the performance of SDR-based dual-band CDMA system in wideband multipath channel employing RAKE receiver with MRC diversity. For the simulation of SDR-based dual-band CDMA system, we used digital If techniques, polyphase analysis filter bank as channelizer, where Remez exchange algorithm is employed in the realization of the digital filter.

  • PDF