• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.9
• /
• pp.243-271
• /
• 1998

The changes of life-style by improving the standard of living produce the development of food service industry. But, the consequence is that food waste also increase. I think that the problems about the food waste become more critical. There are some reports about counting the amount of remaining foods until now. But, I can not find reports about the calory analysis of the remaining foods. So, I analysis the amounts and calories of the food and remaining food served at the restaurants for the purpose of groping how to reduce the remaining food and conclude as follows. First, the average amount of the food giving to one person is 1007gm(from 300gm to 1367gm), and the average amount of the remaining food is 126gm(from 29gm to 172gm). Second, the average calory of the food giving to one person is 795.5kcal(from 464kcal to 1225kcal), and the average calory of the remaining food is 140.8kcal(from 29kcal to 289kcal). So, we gain 130kcal more than recommending calory to woman. Therefore, we need to studies of developing menu, controlling the amount of supplied food, and improving how to supply. Also we need to study about the using of food bank and publish and use about recycling of food waste.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.28-35
• /
• 2007

In this paper, a study was made of the technology used to measure the remaining amount of energy in secondary cells, for which demand is ever increasing. First, the standard data were stored for measurement of the remaining energy and a compare/analysis algorithm was developed. Next, hardware was designed and a prototype that can display the SOC(State Of Charge) through an LCD displayinstrument was created. The small size of the prototype allows it to be portable and its performance is within ${\pm}4$[%].

• Korean Journal of Clinical Pharmacy
• /
• v.6 no.2
• /
• pp.24-27
• /
• 1996

In order to determine whether there was a clinically sufficient amount of drug remaining in used fentanyl patches, quantitative analysis of two different types of patches, each containing 2.5 mg (n=36) and 5 mg (n=20) was performed. After being used for approximately 72 hours by patients with cancer, each patch was put in the plastic bag and stored at $4^{\circ}C$ until analysis. Fentanyl remaining in patches was extracted with 50 ml methanol, diluted with water, and counted twice in a $\gamma-Counter$ (expressed as CPM). Patches that originally contained 2.5 mg and 5 mg of fentanyl were shown to have $0.48{\sim}1.86\;mg\;(mean:\;1.03\;mg,\;41.16\%)\;and\;0.37{\sim}3.95\;mg\;(mean:\;2.37\;mg,\;47.33\%)$ after use, respectively. A wide interpatient variability was observed in the rate of fentanyl release from patches although the application period was standardized to 72 hours. Since a significant amount of drug remained in the discarded patches, it is highly recommended that patients dispose used ones under supervision to prevent abuse or misuse of the narcotic drug.

• Journal of People, Plants, and Environment
• /
• v.24 no.3
• /
• pp.267-275
• /
• 2021

Background and objective: Particulate matter (PM) has a fatal effect on health. There have been many studies on the use of plants such as trees and shrubs as eco-friendly and sustainable biofilter for the removal of PM. In forming more green space, ground cover plants play an important role in multi-layered planting. This study was conducted to investigate the ability of plants to reduce PM, targeting Korean native ground cover plants with high availability in urban green spaces. Methods: For 4 species of Asteraceae, 4 species of Liliaceae, and 3 species of Rosaceae, one species of plants at a time were placed in an acrylic chamber (800 × 800 × 1000 mm, L × W × H) modeling an indoor space. After the injection of PM, the amount of PM remaining in the chamber over time was investigated. Results: For all three types of PM (PM10, PM2.5, PM1), significant difference occurred in the amount of PM remaining between plant species after 1 hour in the Liliaceae chamber, 3 hours in the Asteraceae chamber, and 5 hours in the Rosaceae chamber. With Liliaceae, the leaf area and the amount of PM remaining in the chamber showed a negative (-) correlation. With the Asteraceae and Rosaceae, there was a weak negative correlation between the leaf area and the amount of PM remaining in the chamber. Conclusion: When using ground cover plants as a biofilter to remove PM, it is considered effective to select a species with a large total leaf area, especially for Liliaceae.

• Journal of the Korean Society of Radiology
• /
• v.16 no.2
• /
• pp.95-102
• /
• 2022

This study compares the difference between the remaining amount in syringes according to injection method and the dose of physiological saline when the radiopharmaceutical ¹⁸F-FDG isotope is injected into patients who visited the hospital for PET examination. After performing a CT or MRI using a contrast medium when ¹⁸F-FDG was injected into 40 patients who came to the hospital for PET examination without removing the 3-way, the radioactivity remaining in the syringe and the 3-way was measured and the dose of radioactivity confirmed. At this time, 20 patients were divided into different dose groups of physiological saline. Another injection method was used to compare the remaining amount of the syringe and the difference in the remaining amount according to the amount of physiological saline when the injection was performed with an extension. After an injection of ¹⁸F-FDG, the actual administered dose was confirmed by measuring the radioactivity remaining in the syringe and the 3-way or extension with a calibrator. As a result of measuring the radioactivity of the syringe before administering the radiopharmaceutical and the radioactivity of the syringe and the 3-way or extension after administration, the 3-way injection method in 10 cc's of physiological saline had the lowest residual amount. The remaining amount increased in the order of the extension to 10 cc's of saline and the 3-way to 5 cc's of saline. Likewise, the 5 cc's saline solution and the extension injection method demonstrated the highest residual amounts. The residual difference with the lowest level of remaining injection method was found to be 0.053 mCi. It was found that in a PET examination, by considering the radioactivity remaining in the 3-way and extension and by adjusting the dose of physiological saline, if the intended dose to be administered to the actual patient is determined, it is possible to administer the radiopharmaceutical to the patient more accurately.

• Restorative Dentistry and Endodontics
• /
• v.43 no.1
• /
• pp.5.1-5.9
• /
• 2018

Objectives: This study evaluated the amount of remaining root canal filling materials after retreatment procedures performed by undergraduate students using manual, rotary, and reciprocating techniques through micro-computed tomographic analysis. The incidence of instrument fracture and the instrumentation time were also evaluated. Materials and Methods: Thirty maxillary single rooted teeth were prepared with Reciproc R25 files and filled with gutta-percha and AH Plus sealer by the continuous wave of condensation technique. Then, the specimens were assigned to 3 groups (n = 10), according to the retreatment technique used: manual, rotary, and reciprocating groups, which used K-file, Mtwo retreatment file, and Reciproc file, respectively. Retreatments were performed by undergraduate students. The sample was scanned after root canal filling and retreatment procedures, and the images of the canals were examined to quantify the amount of remaining filling material. The incidence of instrument fracture and the instrumentation time were recorded. Results: Remaining filling material was observed in all specimens regardless of the technique used. The mean volume of remaining material was significantly lower in the Reciproc group than in the manual K-file and Mtwo retreatment groups (p < 0.05). The time required to achieve a satisfactory removal of canal filling material and refinement was significantly lower in the Mtwo retreatment and Reciproc groups (p < 0.05) when compared to the manual K-file group. No instrument fracture was observed in any of the groups. Conclusions: Reciproc was the most effective instrument in the removal of canal fillings after retreatments performed by undergraduate students.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.55-65
• /
• 2010

We present a method for increasing network lifetime without link failure due to lack of battery capacity of nodes in wireless ad-hoc networks with low mobility. In general, a node with larger remaining battery capacity represents the one with lesser traffic load. Thus, a modified AODV routing protocol is proposed to determine a possible route by considering a remaining battery capacity of a node. Besides, the total energy consumption of all nodes increase rapidly due to the huge amount of control packets which should be flooded into the network. To reduce such control packets efficiently, a source node can store information about alternative routes to the destination node into its routing table. When a link failure happens, the source node should retrieve the route first with the largest amount of the total remaining battery capacity from its table entries before initiating the route rediscovery process. To do so, the possibility of generating unnecessary AODV control packets should be reduced. The method proposed in this paper increases the network lifetime by 40% at most compared with the legacy AODV and MMBCR.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.3
• /
• pp.397-412
• /
• 1995

The purpose of this study was to analyze the stress distribution in the dentin and post structures by the various post core materials and the amount of remaining coronal tooth structures. The 2-dimensional finite element models of mandibular 2nd premolars was divided into seven types according to the various amount of remaining coronal tooth structures. All types were modeled using equal length, diameter and shape of the post. 2 types of post and core materials were used : 1) cast gold post and core 2) stainless steel post and compsite resin core 10 Newton force was applied as follows 1) vertical force on occlusal fossa 2) $45^{\circ}$ oblique force on buccal surface of buccal cusp tip The results were as follows : 1. There was no apparent difference in the pattern of stress distribution according to the amount of remaining coronal tooth structure. 2. There was no apparent difference in the pattern of stress distribution within the dentin according to the post and core materials. A cast gold post and core generated lower dentin stress than a stainless steel post and resin core. 3. Max. dentinal stress resulting from vertical force was observed in the lingual side of dentin around the crown margin.This stress resulting from oblique force was observed in the lingual root surface of alveolar bone crest level.

• The korean journal of orthodontics
• /
• v.21 no.3
• /
• pp.563-580
• /
• 1991

The purpose of this study was to investigate and compare the biomechanical properties of orthodontic rubber elastic materials. Latex bands, nylon-covered elastic threads and polyurethane-based elastic modules, delivering $205{\pm}10$ grams force at 30mm stretching state were selected and stored separately in 3 environments-air ($22{\pm}3^{\circ}C$), distilled water ($37{\pm}1^{\circ}C$), or natural saliva ($37{\pm}1^{\circ}C$). And, the amount of remaining force and permanent elongation of each sample were measured on Instron at interval of 1 hour, 6 hours, 12 hours, 24 hours, 1 week, and 2 weeks. So the data derived were analyzed statistically. The results were as follows: 1. Force decay and permanent elongation of all materials increased with time lapsed; elastic module, latex band and nylon-covered elastic thread in that order of the amount of force decay; elastic module, elastic thread, latex band in that order of the amount of permanent elongation. 2. Among environmental conditions, force decay and permanent elongation in natural saliva, most increased, and those in air, least increased. 3. There was a negative correlation between force decay and permanent elongation. 4. Force decay and permanent elongation were most affected by the material itself, time and environments in that order. 5. After 24 hours in saliva, the percentage of remaining force in elastic module was 51.9% (107.37grams); in latex band, 83.2%(172.62grams); in elastic thread, 85.0%(179.25grams). After 2 weeks in saliva, the percentage of remaining force in elastic module was 42.9%(88.75grams); in latex band, 74.5%(154.50grams); in elastic thread, 77.6%(163.75grams).

• Journal of Korean Institute of Industrial Engineers
• /
• v.43 no.3
• /
• pp.176-183
• /
• 2017

In recent years, studies about multitasking becomes more important. During multitasking, operators can feel frustration when they are interrupted during the task and frustration can affect operator's emotional state and performance. However there is no research on measuring the frustration quantitatively in multitasking environment. In this paper, we suggested quantitative measurement of frustration during multitasking. In order to measure the frustration, we made a mathematical representation with emotional decay model and the initial intensity of frustration based on cognitive closure theory. The amount of initial intensity could be represented as the ratio of actual remaining time to expected remaining time. By the experiment, we measured the frustration during the experiment and compared this values with values of frustration dimension of NASA-TLX. Finally we got the linear regression model with a good accuracy ($R^2=0.986$). This study contributes to measuring the emotion quantitatively by the relation of expected and actual remaining time in multitasking environment.