• Journal of Applied Reliability
• /
• v.11 no.3
• /
• pp.235-244
• /
• 2011

Hydraulic hose assemblies deliver a fluid power in various oil pressure equipment such as construction machinery, automobile, aircraft, industrial machinery, machine tools and machinery for ships. Also, they are widely used as pipes in oil pressure circuit. When we estimate their lifetime, it is essential to conduct an accelerated life test by choosing the factor that suits the usage condition of the test object since traditional test method for estimating lifetime under the influence of various external factors incurs hardship in terms of time and expenses. The objective of this study is to propose an acceleration model that takes both temperature and pressure without flexing condition into consideration. The lifetime is estimated by applying the proposed temperature-nonthermal acceleration model to the test data. And we compare the proposed temperature-nonthermal acceleration model and the accelerated life equation suggested by John(1994).

• Structural Engineering and Mechanics
• /
• v.38 no.2
• /
• pp.171-193
• /
• 2011

One of the possible alternatives of simulation-based time-dependent reliability assessment of pre-stressed biconcave and biconvex cable trusses, the Monte Carlo method, is applied in this paper. The influence of an excessive deflection of cable truss (caused by creep of cables and rheologic changes) on its time-dependent serviceability is investigated. Attention is given to the definition of the basic random variables and their statistical functions (basic, mutually dependent random variables such as the pre-stressing forces of the bottom and top cable, structural geometry, the Young's modulus of elasticity of the cables, and the independent variables, such as permanent load, wind, snow and thermal actions). Then, the determination of the response of the cable truss to the loading effects, and the definition of the limiting values considering serviceability of the structure are performed. The potential of the method, using direct Monte Carlo technique for simulation-based time-dependent reliability assessment as a powerful tool, is emphasized. Results obtained by the First order reliability method (FORM) are compared with those obtained by the Monte Carlo simulation technique.

• Journal of Drive and Control
• /
• v.21 no.1
• /
• pp.16-21
• /
• 2024

The yaw gearbox is a key device in a wind power generator that improves power generation efficiency by rotating hundreds of tons (400 to 600 tons) of nacelle so that the blade reaches 90 degrees in the wind direction. Recently, installation sites have been advancing from land to sea as they have become super-large at (8-12) MW to increase the economic feasibility of wind power generators and utilize excellent wind resources, and the target life of large wind power generators is 25 to 30 years. The yaw gearbox of 6 to 12 sets is installed in a very complex place inside the nacelle on the tower with parallels, and it is important to secure the reliability of the yaw gearbox because if a failure occurs after installation, it costs tens to hundreds of times the price of a new product to restore. In this study, equivalent loads were calculated by analyzing failure mode and field data, accelerated life test conditions were established, and a test device was constructed to perform the accelerated life tests and performance tests to ensure the reliability of the gearbox.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.871-877
• /
• 2015

Deep-sea equipment such as underwater robots and unmanned submersible vehicles, include various machine components and sensors, and it is important that their reliabilities be tested before use in the fields. This is necessary because they are affected by complex extreme-environment conditions, such as high pressures, extreme temperatures, and tidal forces that are present in the deep sea. We require test equipment that can conduct empirical tests in conditions that mimic these complex oceanic environments. In this study, we propose specifications that should be met, and a design plan for the primary components, which should limit their use to a maximum water pressure of 2.0 MPa, water temperature of $5{\sim}60^{\circ}C$, and a maximum flow velocity of 2 m/s. in work-in type underwater combined environment test equipment and. We present test system development procedures to verify the reliability of products and systems used in deep-sea environments.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.5
• /
• pp.285-295
• /
• 2004

The outage cost assessment has an important position for determination of the optimal level or optimal range of reliability for power system expansion planning. Establishing the worth of service reliability is a very difficult and subjective task. While the utility cost(reliability cost) will generally increase as consumers are provided with higher reliability, the consumer costs(reliability worth) associated with supply interruptions will decrease as the reliability increases. The total costs to society are the sum of these two individual costs and the optimum or target level of reliability is achieved at minimum point of the total cost curve. This paper addresses the role, need and assessment algorithms and methodologies of the outage cost in power system expansion planning. In a case study, the outage cost has been assessed using macro approach for our country 15years(1986-200l) in the case study. Additionally, determination processing of optimum reliability level is presented in another case study with the five buses MRBTS.

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.386-403
• /
• 2016

The safety of nuclear power plants is analyzed by a probabilistic risk assessment, and the fault tree analysis is the most widely used method for a risk assessment with the event tree analysis. One of the well-known disadvantages of the fault tree is that drawing a fault tree for a complex system is a very cumbersome task. Thus, several graphical modeling methods have been proposed for the convenient and intuitive modeling of complex systems. In this paper, the reliability graph with general gates (RGGG) method, one of the intuitive graphical modeling methods based on Bayesian networks, is improved for the reliability analyses of dynamic systems that have various operation modes with time. A reliability matrix is proposed and it is explained how to utilize the reliability matrix in the RGGG for various cases of operation mode changes. The proposed RGGG with a reliability matrix provides a convenient and intuitive modeling of various operation modes of complex systems, and can also be utilized with dynamic nodes that analyze the failure sequences of subcomponents. The combinatorial use of a reliability matrix with dynamic nodes is illustrated through an application to a shutdown cooling system in a nuclear power plant.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.2
• /
• pp.37-46
• /
• 2012

The change of rainfall pattern and hydrologic factors due to climate change increases the occurrence probability of agricultural reservoir water shortage. Water supply assessment of reservoir is usually performed current reservoir level compared to historical water levels or the simulation of reservoir operation based on the water budget analysis. Since each reservoir has the native property for watershed, irrigation district and irrigation water requirement, it is necessary to improve the assessment methods of agricultural reservoir water capability about water resources system. This study proposed a practical methods that water supply vulnerability assessment for an agricultural reservoir based on a concept of probabilistic reliability. The vulnerability assessment of water supply is calculated from probability distribution of water demand condition and water supply condition that influences on water resources management and reservoir operations. The water supply vulnerability indices are estimated to evaluate the performance of water supply on agricultural reservoir system, and thus it is recommended a more objective method to evaluate water supply reliability.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.2
• /
• pp.31-38
• /
• 2020

The study evaluated the accuracy and intra-rater reliability for OWAS (Ovako Working posture Analysing System), RULA (Rapid Upper Limb Assessment), REBA (Rapid Entire Body Assessment) to improve their evaluation accuracy and reliability. Participants (n = 163) with undergraduate degree were recruited in this study and trained for 6 hours about the ergonomic assessment methods. Ergonomic assessments were conducted using OWAS, RULA, and REBA for a representative work with dynamic posture found in manufacturing industries. The study compared action categories (overall level) and detailed evaluation scores for individual body part. Action categories of the participants significantly differed from the golden reference defined by ergonomic experts. The participants underrated or omitted scores for truck (37.4% of the participants) and legs (52.8%) in OWAS. Similarly, the participants underrated or omitted additional scores for all body parts except the hand and wrist in RULA (53.5%) and REBA (54.8%). On the other hand, the participants overrated scores for the hand and wrist in RULA (55.2%) and REBA (39.9%). The results found in this study can help of selecting focus points and parts during assessment and education to improve accuracy and reliability of the ergonomic assessment methods.

• Physical Therapy Rehabilitation Science
• /
• v.12 no.2
• /
• pp.105-114
• /
• 2023

Objective: The study examined the validity and reliability of tele-assessment of cervical range of motion (ROM) through video conferencing. Design: A cross-sectional study Methods: The study included 22 healthy adults as subjects and 10 physical therapists as evaluators. The subjects underwent both face-to-face and tele-assessment of cervical ROM. The CROM (Cervical Range of Motion) device was used for reference measurements in the face-to-face assessment. The evaluators assessed the subjects' ROM through visual inspection (VI) and using a Universal Goniometer (UG) in the tele-assessment. Results: The results showed a significant correlation between the face-to-face and tele-assessment measurements for all ROM contents. The correlation coefficients ranged from r=0.54 to 0.71 (p<0.05), indicating concurrent validity. In terms of inter-rater reliability, the ICC values for both VI and UG assessments in the tele-assessment were high, with ICCs of 0.93 and 0.92, respectively. Additionally, the study investigated the usability of the tele-assessment method and environment. The satisfaction of the participants and evaluators was assessed using the Telehealth Usability Questionnaire (TUQ), which evaluates perceptions, usability, and satisfaction with telehealth services. Conclusions: In conclusion, tele-assessment of cervical range of motion using video conferencing was valid and reliable. Also, investigated participant and evaluator satisfaction and opinions, providing insights into the clinical value of tele-assessment. It is important to note that the study was conducted only healthy adults, and further research may be needed to validate the tele-assessment method in populations with cervical dysfunction or neck pain. These findings support the potential effectiveness of telerehabilitation services in assessing and managing musculoskeletal disorders.

• Proceedings of the Korean Reliability Society Conference
• /
• 2004.07a
• /
• pp.227-232
• /
• 2004

The failure of geogrids can be defined as an excessive creep strain which causes the collapse of slopes and embankments. In this study, the accelerated creep tests were applied to two different types of polyester geogrids, at 75, 80, 85$^{\circ}C$ by applying 50% load of ultimate tensile strengths using a newly designed test equipment which is allowed the creep testing at higher temperatures. And then the creep curves were shifted and superposed in the time axis by applying time-temperature supposition principles. In predicting the lifetimes of geogrids, the underlying distribution for failure times were determined based on identification of the failure mechanism. The results indicate that the conventional procedures with the newly designed test equipment are shown to be effective in prediction of the lifetimes of geogrids with shorter test times. In addition, the predicted lifetimes of geogrids having different structures at various creep strains give guidelines for users to select the proper geogrids in the fields.