• IE interfaces
• /
• v.15 no.3
• /
• pp.270-278
• /
• 2002

Product Liability(PL) is a legal policy to deal with global competition by improving domestic industrial competitive power and to reduce the cost of defect products. The purpose of this paper is to address the state of the art solutions to dispute on PL, in reality of a frequent occurrence of global product exchange focussing on product safety that is one of the most important functions of PL and to improve solution of the product safety and reliability responsive to PL. To minimize PL exposure, manufacturers should reflect comprehensive product safety and reliability concepts in establishing PL prevention policies. Total PL prevention policies are composed of total quality management and product safety management system in respect of safety design, risk, and reliability. These PL prevention activities should be performed consistently during the total product life cycle, especially product research and development periods.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1177-1183
• /
• 2013

In this paper, the analysis of inspection period bases on reliability is suggested in the field of traction power system. Even though there are several maintenance models, the most commonly used maintenance assessment has been focused on time based maintenance in real traction power systems. The maintenance intervals are selected on the basis of long-time experience. It ensures high availability and exact planning of staff. Reliability centered maintenance, which evaluates criticality and severity of each failure mode, achieves the operation, maintenance, and cost-effective improvement that will manage the risks of equipment. This paper deals with electrification in railway inspection frequency and applied reliability based inspection frequency instead of constant intervals. The distribution function of failure rate in traction power system belongs to Weibull function. Also, the fault data and the number of installed equipments for electrifications are collected. The failure history is investigated and classified in detail. Though these complicated procedures, it contribute to extend equipment lifetime and to reduce maintenance costs.

• Journal of Applied Reliability
• /
• v.4 no.2
• /
• pp.121-131
• /
• 2004

HALT (Highly Accelerated Life Test) was performed to improve the reliability by removing the potential failure for newly developing PCB used for the vibration condition from 2OHz to 2OOHz. During HALT, it is found that the lead of Al electrolytic capacitor of SMD type is detached from PCB. As the result for the failure analysis and FEM (Finite Element Method), it is clarified that the root cause for this failure is the improper attachment of an Al electrolytic capacitor on PCB by the mistake of a PCB design. HALT was performed in previous condition to verify the failure analysis after molding an epoxy resin to overcome the PCB design mistake and it is not observed the same failure. Therefore, it is assumed that the same failure in field will be not occurred by the proper implementation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.188-202
• /
• 1996

In this paper, we propose a symmetrical pseudo faulty processing elements genration technique to improve the overall reliability of arrays with fixed hardware resources on the fault tolerant VLSI arrays based on single-track switches. We have analyzed the reliability of fault tolerant VLSI arrays and designed control logic for real-tiem reconfiguration. Applying this technique to reconfiguration of VLSI 2-D arrays, we have found that the proposed scheme achieves a higher reliability than the previus methods of similar condition. And we have found that the results of reliability analyzed by mathematic computation are very close to simulated ones. Furthermore, the time overhead for reconfiguration is independent of the array size because the control for reconfiguration is distributively executed by each processing elements. And the proposed scheme has an advantage which maintained properties of VLSI arrays by keeping the locality of interconnections as high as possible even after the reconfiguration.

• Journal of Applied Reliability
• /
• v.11 no.1
• /
• pp.31-41
• /
• 2011

A strut mount is an important part of vehicles which reduces the vibration and the impact transmitted from the wheels while supporting a shock absorber and a coil spring. Rubber compounding, shape design, and process design technologies are important components to improve the functionality of a strut mount such as durability, static, dynamic, and torsional characteristics. Among them the rubber compounding technology is the key technology which dominates the quality of a strut mount. In this study a strut mount with high reliability has been developed by adopting new rubber compounding and improving the shape of the inner plate and the isolator. Through the tests for prototypes it has been shown that the durability has been improved more than 2.5 times, from about 60,000 cycles to about 160,000 cycles.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.187-192
• /
• 2005

Under development program for a complex system, the total system or major subsystems are tested to failure, system failure modes are analyzed, and design and engineering changes are made to eliminate these failure modes. If this TAAF(test-analyze-and-fix) process is continued, and modifications are made in a competent manner, then the system reliability increase. This paper presents the reliability growth theory and applies it to some subsystems during their development and initial production testing. The application of these techniques is a part of the product assurance function that plays an important role in product reliability improvement. In addition, the EN 50126 requires essentially reliability growth for RAM growth monitoring.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.991-994
• /
• 2000

Recently, reliability engineering is regarded as the major field for aerospace and electronics, semiconductor related industry to improve safety and life cycle. And advanced manufacturing systems with high speed and intelligent have been developed for the betterment of machining ability In this case, reliability prediction has also important roll from design procedure to manufacturing and assembly process. Accordingly in this study, reliability evaluation system has been developed for prevention trouble. quality and life cycle improvement extremely for advanced mother machinary.

• Journal of Korean Society for Quality Management
• /
• v.20 no.2
• /
• pp.94-108
• /
• 1992

This study involves an experiment for the cognitive experiment design and the human reliability in software engineering. Its overall objectives are to analyze common-cause human domain error and reliability in human-software interaction. A laboratory study was performed to analyze software engineers' task behavior in software production and to identify software design factors contributing to the effects in common cause failure redundancy. Common-cause model and its function were developed, then the main experiment using programming experts was conducted in order to define a new cognitive paradigm, in the aspects of identification, pattern recognition, and behavior domain for human reliability and quality control in software development. The results and analytical procedures developed in this research can be applied to reliability improvement and cost reduction in software development for many applications. Results are also expected to provide guidelines for software engineering quality control and for more effective design of human-software interface system.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.319-326
• /
• 2001

Railway signaling safety system organizes equipments and facilities of railway, increases transport efficiency and assures safe operation of railway. In the early days of signaling system railway managers made sure of safety by using relay logic technology based on fail-safe concept. But the development result of computer and science having been introduced to railway industry, railway signaling equipments begin to be operated through micro electronic control system. Accordingly high speed and high density operation of train became possible. Software reliability and safety technology that controls important systems of railway was highlighted. In the middle of 1990s the standard or guideline of railway reliability and safety were studied and established, and are being reviewing in Europe, Japan etc. Our reliability and safety technology have depended largely on foreign countries. In this study we performed a basic study about the reliability of software that controls the railway signaling system.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2028-2030
• /
• 2003

This paper describes the results of reliability prediction analysis of control rod control system, which is being developed as part of KNICS project. The results of reliability prediction indicate MTBF(Mean Time Between Failure) of cards for control rod control system. A purpose of reliability prediction is to evaluate MTBF of cards, identify the design drawbacks of cards, and propose design improvement to a designer to help design the more reliable control rod control system. This reliability prediction analysis used the the part count and part stress method in the basis of MIL-HDBK-217F.