• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.5
• /
• pp.94-104
• /
• 2000

The accuracy and reliability of the target tracking is very critical issue in the design of automotive collision warning radar A significant problem in multi-target tracking (MTT) is the target-to-measurement data association If an incorrect measurement is associated with a target, the target could diverge the track and be prematurely terminated or cause other targets to also diverge the track. Most methods for target-to-measurement data association tend to coalesce neighboring targets Therefore, many algorithms have been developed to solve this data association problem. In this paper, a new multi-target data association method based on order statistics is described The new approaches. called the order statistics probabilistic data association (OSPDA) and the order statistics joint probabilistic data association (OSJPDA), are formulated using the association probabilities of the probabilistic data association (PDA) and the joint probabilistic data association (JPDA) filters, respectively Using the decision logic. an optimal or near optimal target-to-measurement data association is made A computer simulation of the proposed method in a heavy cluttered condition is given, including a comparison With the nearest-neighbor CNN). the PDA, and the JPDA filters, Simulation results show that the performances of the OSPDA filter and the OSJPDA filter are superior to those of the PDA filter and the JPDA filter in terms of tracking accuracy about 18% and 19%, respectively In addition, the proposed method is implemented using a developed digital signal processing (DSP) board which can be interfaced with the engine control unit (ECU) of car engine and with the d?xer through the controller area network (CAN)

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.3-9
• /
• 2015

The wireless communication system adopts an appropriate retransmission scheme on each system protocol layer to improve reliability of data transmission. In each system protocol layer, the retransmission scheme operates in independently other layers and operates based on the parameters without reference to end-to-end performance of wireless communication system. For this reason, it is difficult to design the optimal system parameters that satisfy the QoS requirements for each service class. Thus, the performance analysis of wireless communication system is needed to design the optimal system parameters according to the end-to-end QoS requirements for each service class. In this paper, we derive the mathematical model to formulate the end-to-end performance of wireless communication system. We also evaluate the performance at the MAC and transport layers in terms of average spectral efficiency and average transmission delay. Based on the results of performance evaluations, we design the optimal system parameters according to the QoS requirements of service classes. From the results, the HARQ combined with AMC is appropriate for the delay-sensitive service and the ARQ combined with AMC is appropriate for a service that is insensitive to transmission delay. Also, the TCP can be applied for the delay-insensitive service only.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.1
• /
• pp.64-70
• /
• 2007

Raman spectroscopy is known to have strong potential for providing noninvasive dermatological diagnosis of skin cancer. According to the previous work, various well known methods including maximum a posteriori probability (MAP) and multilayer perceptron networks (MLP) showed competitive results. Since even the small errors often leads to a fatal result, we investigated the method that reduces classification error perfectly by screening out some ambiguous patterns. Those ambiguous patterns can be examined by routine biopsy. We incorporated an ambiguous pattern class in MAP, linear classifier using minimum squared error (MSE), MLP and reduced coulomb energy networks (RCE). The experiments involving 216 confocal Raman spectra showed that every methods could perfectly classify BCC by screening out some ambiguous patterns. The best results were obtained with MSE. According to the experimental results, MSE gives perfect classification by screening out 8.8% of test patterns.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.40-48
• /
• 2008

Security of self organized mobile ad hoc networks is an important issue because administration information in the networks is managed by the constituent nodes. Especially authentication mechanism is necessary for trust setup between newly joining nodes and the network. The authentication models and protocols which are based on the wireline infrastructure could not be practical for mobile ad hoc network. Although public key algorithm-based method is widely used for authentication, it is not easy to be applied to mobile ad hoc networks because they do not have infrastructure such as centralized CA which is needed for certificate verification. In this paper, we consider the public key based random CA group method proposed in [1] to provide efficient authentication scheme to mobile ad hoc networks and analyze the performance of the method, which is then compared to the home CA method. From the analysis results, we see that the random CA method where the function of CA is distributed to some mobile nodes and the authentication information is propagated to randomly chosen CAs shows higher reliability and lower cost than home CA method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.117-123
• /
• 2013

In the recent cloud storage environment, the amount of SSD (Solid-State Drive) replacing with the traditional hard disk drive is increasing. Management of SSD for its space efficiency has become important since SSD provides fast IO performance due to no mechanical movement whereas it has wearable characteristics and does not provide in place update. In order to manage space efficiency of SSD, data de-duplication technique is frequently used. However, this technique occurs much overhead because it consists of data chunking, hasing and hash matching operations. In this paper, we propose new data de-duplication method using PRAM cache. The proposed method uses hierarchical hash tables and LRU(Least Recently Used) for data replacement in PRAM. First hash table in DRAM is used to store hash values of data cached in the PRAM and second hash table in PRAM is used to store hash values of data in SSD storage. The method also enhance data reliability against power failure by maintaining backup of first hash table into PRAM. Experimental results show that average writing frequency and operation time of the proposed method are 44.2% and 38.8% less than those of existing data de-depulication method, respectively, when three workloads are used.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.11
• /
• pp.4689-4695
• /
• 2014

Background: A great number of studies have shown that cytochrome P450 1A1 (CYP1A1) genetic polymorphisms, CYP1A1 Msp I and CYP1A1 Ile/Val, might be risk factors for digestive tract cancers, including esophageal cancer (EC), gastric cancer (GC), hepatic carcinoma (HC), as well as colorectal cancer (CC), but the results are controversial. In this study, a meta-analysis of this literature aimed to clarify associations of CYP1A1 genetic polymorphisms with digestive tract cancers susceptibility in Chinese populations. Materials and Methods: Eligible case-control studies published until December 2013 were retrieved by systematic literature searches from PubMed, Embase, CBM, CNKI and other Chinese databases by two investigators independently. The associated literature was acquired through deliberate search and selection based on established inclusion criteria. Fixed-effects or random-effects models were used to estimate odds ratios (ORs and 95%CIs). The meta-analysis was conducted using Review Manager 5.2 and Stata 12.0 softwares with stability evaluated by both stratified and sensitivity analyses. Moreover, sensitivity analysis and publication bias diagnostics confirmed the reliability and stability. Results: Eighteen case-control studies with 1,747 cases and 2,923 controls were selected for CYP1A1 MspI polymorphisms, and twenty case-control studies with 3, 790 cases and 4, 907 controls for the CYP1A1 Ile/Val polymorphisms. Correlation associations between CYP1A1 Ile/Val polymorphisms and digestive tract cancers susceptibility were observed in four genetic models in the meta-analysis (GG vs AA:OR= 2.03, 95%CI =1.52- 2.72; AG vs AA: OR=1.26, 95%CI =1.07-1.48; [GG+AG vs AA] :OR =1.42, 95%CI=1.20-1.68, [GG vs AA+AG]:OR=1.80, 95%CI =1.40-2.31). There was no association between CYP1A1 Msp I polymorphisms and digestive tract cancers risk. Subgroup analysis for tumor type showed a significant association of CYP1A1 Ile/Val genetic polymorphisms with EC in China. However, available data collected by the study failed to reveal remarkable associations of GC or HC with CYP1A1 Ile/Val genetic polymorphisms and EC, GC or CC with CYP1A1 MspI genetic polymorphisms. Conclusions: Our results indicated that CYP1A1 Ile/Val genetic polymorphisms, but not CYP1A1 Msp I polymorphisms, are associated with an increased digestive tract cancers risk in Chinese populations. Additional well-designed studies, with larger sample size, focusing on different ethnicities and cancer types are now warranted to validate this finding.

• The Journal of Society for e-Business Studies
• /
• v.20 no.4
• /
• pp.1-17
• /
• 2015

A river water level monitoring system which prevents salt water damages and effectively excludes floods has been developed to contribute efficient operation of Nakdong river estuary barrage. The system can be used for monitoring upstream conditions more quickly and do appropriate responses over changes. Telemetry and telecontrols using PLCs have been built at the three sites that directly influence on the operation of barrage gates, and are linked to Nakdong river estuary barrage's IOS (Integrated Operation System) through public communication networks. By using PLC, the system can achieve even higher reliability and versatility than before as well as easy management. By power control devices, we can remotely control the power of PLCs to treat the minor troubles instantly without going on-sites. The power control devices also save data in preparation for the cases of communication failures. The system uses ADSL (FTTH) as a main network between SCADA server and PLCs, and CDMA (M2M) as a secondary network. In order to compensate security vulnerabilities of public communication network, we have installed the VPNs for secure communication between center and the observation stations, just like a dedicated network. Generally, river water level observations have been used custom-manufactured remote terminals to suit their special goals. However, in this case, we have established a system with open architecture considering the interface between different systems, the ease of use and maintenance, security, price, etc.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.1
• /
• pp.31-38
• /
• 2003

In the current electronic technology atmosphere, MEMS (Microelectromechanical System) technology is regarded as one of promising device manufacturing technologies to realize market-demanding device properties. In the packaging of MEMS devices, the packaged structure must maintain hermeticity to protect the devices from a hostile atmosphere during their operations. For such MEMS device vacuum packaging, we introduce the LTCC (Low temperature Cofired Ceramic) packaging technology, in which embedded passive components such as resistors, capacitors and inductors can be realized inside the package. The technology has also the advantages of the shortened length of inner and surface traces, reduced signal delay time due to the multilayer structure and cost reduction by more simplified packaging processes owing to the realization of embedded passives which in turn enhances the electrical performance and increases the reliability of the packages. In this paper, the leakage rate of the LTCC package having several interfaces was measured and the possibility of LTCC technology application to MEMS devices vacuum packaging was investigated and it was verified that improved hermetic sealing can be achieved for various model structures having different types of interfaces (leak rate: stacked via; $4.1{\pm}1.11{\times}10^{-12}$/ Torrl/sec, LTCC/AgPd/solder/Cu-tube; $3.4{\pm}0.33{\times}10^{-12}$/ Torrl/sec). In real application of the LTCC technology, the technology can be successfully applied to the vacuum packaging of the Infrared Sensor Array and the images of light-up lamp through the sensor way in LTCC package structure was presented.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.1
• /
• pp.11-15
• /
• 2016

The organic light emitting diodes (OLEDs) have been studied as large flexible displays, light source and hard wares of internet of things. However, OLEDs show some drawbacks in terms of external environments due to the low work function of the metals and the reactive organic materials. In particular, the operation functions of the OLEDs tend to deteriorate rapidly by exposing the oxygen and moisture. So as to prevent it, domestic and overseas studies underway in various method such as ALD, PVD, CVD. But it has complex process and high cost. Therefore In order to protect devices from the external environments, it is important to develop the passivation thin films of low-cost and simple process which can prevent the devices from the penetration of the oxygen and moistures. In this study, to improve the reliability, passivation thin films were coated onto the green OLEDs by spin coating method and investigated the changes of the optical properties of the prepared devices at various doping concentrations of sodium alginate (SA). The passivation solutions were synthesized by using polyvinyl alcohol (PVA) host material with a dopant of SA which were added with the amounts of 10, 20 and 40 wt% into the PVA. As a result, the best barrier properties of the OLEDs were obtained for the samples with 40 wt% SA. Finally, the passivation films can be optimized by using the mixture solution of PVA and SA materials.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.47-52
• /
• 2017

This research scrutinizes the data retention characteristics of the MLC NAND Flash Memory instigated by the loss effect of trapped charge when the memory is in the state of program saturation. It is attributed to the threshold voltage saturation phenomenon which engenders an interruption to the linear increase of the voltage in the memory cell. This phenomenon is occasioned by the outflow of the trapped charge from the floating gate to the control gate, which has been programmed by the ISPP (Incremental Step Pulse Programming), via Inter-Poly Dielectric (IPD). This study stipulates the significant degradation of thermal retention characteristics of threshold voltage in the saturation region in contrast to the ones in the linear region. Thus the current study evaluates the data retention characteristics of voltage after the program with a repeated reading test in various measurement conditions. The loss effect of trapped charge is found in the IPD layer located between the floating gate and the control gate especially in the nitride layer of the IPD. After the thermal stress, the trapped charge is de-trapped and displays the impediment of the characteristic of reliability. To increase the threshold saturation voltage in the NAND Flash Memory, the storage ability of the charge in the floating gate must be enhanced with a well-thought-out designing of the module in the IPD layer.