• Journal of the Korean GEO-environmental Society
• /
• v.2 no.3
• /
• pp.5-15
• /
• 2001

The purpose of this study is to find sedimentation patterns variation before and after the Saemangeum reclamation. Water circulations before and after the Saemangeum reclamation are calculated diagnostically and prognostically from the water temperature, salinity data, wind data and tidal residual current. Three dimensional movements of injected particles due to currents, turbulence and sinking velocity are tracked by the Euler-lagrange method. The dispersion range of soil grain for one and three day after releasing in the Geum river indicates that the soil grain was sedimented coastal area of Janghang and outer harbor of Kunsan. The soil grain moves a quite distance from the release point when size of soil grain is a small. These results indicate that size of soil grain and residual current is greatly influenced on the dispersion range of soil grain.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.2
• /
• pp.92-97
• /
• 2008

Salt wedge into the river from the sea or fresh water flume (fresh wedge) in the ocean from the sea has density current characteristics. However, when temperature and salinity simultaneously determine the density of wedges, one of salinity and temperature can distributed in the reversed profiles against gravity, even though the density profile is stable. In this case, the double diffusive process is critical in determining mixing rate. The present work studies relative contribution of shear driven mechanical mixing component and double diffusive layering process, when warm salty denser water is introduced into the cold fresh lighter water column. Laboratory experiment releases warm salty denser water into cold fresh lighter water controlling discharge amount to achieve the steady state of density current. When longitudinal density rate becomes 15, the released amount ratio of salt and heat changes sharply and in the releasing point, vigorous mixing occurs with increase of discharged amount due to double diffusion. Double diffusion distabilizes gravitational stability and enhances the mixing rate up to $6{\times}10$ times at the lower density ratio comparing to the higher density ratio.

• Fashion & Textile Research Journal
• /
• v.18 no.4
• /
• pp.531-539
• /
• 2016

Charcoal dyed fabrics have been widely used in home textiles and functional clothing due to their anti-statics, antibacterial, deodorization, far infrared emitting and anion releasing. Soybean fiber were regenerated from soybean. Soybean fiber have biodegradable, microbiocidal, non-allergic, and anti-ageing properties. The purpose of this study is to investigate the dyeing characteristics of soybean fabric using charcoal as colorants. Soybean fabrics were dyed with charcoal solution according to concentration of charcoal, dyeing temperature, and dyeing time. To improve washing fastness and investigate mordanting condition, soybean fabric and dyed soybean fabric with charcoal were mordanted by mordanting agents such as $CH_3COOH$(acetic acid), NaCl(sodium chloride) and $AlK(SO_4)_2{\cdot}12H_2O$(Aluminium Potassium Sulfate). Dyeability and color characteristics of charcoal dyed soybean fabric were obtained by computer color matching and SEM morphology analysis. Particle size of charcoal and color fastness were also investigated. The results obtained were as follows; Mean average diameter of charcoal was $1.39{\mu}m$. The dyeability of soybean fabric using charcoal as colorants was increased gradually with increasing concentration of charcoal dyeing solution and saturated at about 8%(o.w.b.). The optimum dyeing temperature and dyeing time were $90{\sim}105^{\circ}C$ and 60~90 minutes respectively. The overall wash fastness at dyeing concentration 2~4%(o.w.b.) and 6~10%(o.w.b.) were 4 degree and 3-4 degree respectively. The fastness to washing according to mordanting method indicated good grade result as more than 4 degree in all conditions. On the other hand, the staining of adjacent fabrics, i.e. PET, Acryl, Wool, Acetate, Nylon and Cotton was found to be of grade 4 or 4-5 in all conditions.

• Development and Reproduction
• /
• v.23 no.4
• /
• pp.323-331
• /
• 2019

In this study, an experiment was conducted to investigate the annual reproductive cycle of a Korean flat bittering, Acheilognathus rhombeus, from Ogok-myeon located in Seomjin River. The reproductive cycle was examined histologically regarding water temperature and day length of the habitat, the gonadosomatic index (GSI), and developmental characteristics of female and male gonads. The maximum GSI was found to be 3.50±0.53 and 1.36±0.14 for females and males, respectively, when the water temperature and day light was 16.9℃ and 11.3 hours, respectively in October 2018. On the other hand, the minimum GSI was found to be 0.16±0.09 and 0.69±0.15 for males and females in December 2018 and February 2019, respectively. The ovipositor of females appeared from August to November 2018. We compared and calculated the stages of germ cell developmental characteristics in the testis and ovaries to determine the reproductive cycle. According to the result, we classified the female A. rhombeus reproductive cycle into four phases, which are ripe and spawning phase (October), degenerative phase (November to December), growing phase (January to March) and mature phase (April to September). The annual reproductive cycle of male A. rhombeus was categorized into four phases: mature phase (June to October), degenerative phase (November to March), resting phase (April) and growing phase (May). The Korean flat bittering is an autumn-spawner as the main spawning season in October. In male, testicular spermatogonia appeared all year-round, and the ripe and releasing phase, which is characteristics of the spawning season in other fish, did not appear.

• Resources Recycling
• /
• v.18 no.6
• /
• pp.24-29
• /
• 2009

Since cerium carbonate becomes porous cerium oxide by releasing carbon dioxide and vapour steam during calcination of cerium carbonate, nano size cerium oxide can be obtained by milling calcined cerium carbonate. Therefore cerium carbonate [$Ce_2(CO_3)3{\cdot}XH_2O$] is used generally for the preparation of nano size cerium oxide. In order to obtain nano size cerium oxide from cerium carbonate prepared by reactive crystallization of cerium chloride solution and ammonium bicarnonate solution, the effects of experimental variables in the milling and calcination of cerium carbonate, such as calcination temperature, milling time, rpm of planetary mill, amount of dispersant and ball size for milling on the size of cerium oxide was investigated in this study. Cerium oxide prepared with the conditions of calcination temperature of $700^{\circ}C$, milling time of 5 hour was 160nm mean particle size.

• Journal of Animal Science and Technology
• /
• v.51 no.3
• /
• pp.249-254
• /
• 2009

The effect of Mg supplement on the composting of swine manure and the formation of $MgNH_4PO_46H_2O$ (MAP) crystal during composting were examined. Mg source was added at a rate of 1.2 molar ratios to soluble phosphate ($PO_4$) level in swine manure. The temperature profiles and final compost qualities revealed that the Mg source addition didn't retard the decomposition of organic matters. As the added Mg reacted with $NH_4$ and $PO_4$ in manure, creating MAP crystal, the $NH_4$ level was reduced, and this was resulted in low nitrogen lose during the composting. The phosphate level was also decreased with the addition of Mg source, and hence the ratio of orthophosphate to total phosphate (OP/TP) in the final compost was lowered. Therefore, it was assured that supplement of Mg source into the composting materials could enhance the quality of compost by preserving nourishment and converting it into a slowly releasing fertilizer. X-Ray diffraction examination of the final compost showed that a distinct MAP crystal was formed during the composting, and the crystal mainly existed with the compost particle size less than 2.8 mm and over 2/3 of nourishment of the final compost was found in those particles.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.55-65
• /
• 2020

The factors for service quality improvement of frozen and refrigerated warehouses are derived and the differences in perception about service quality improvement between shippers and operators of frozen and refrigerated cargos are analyzed. The objective of this study is to propose quality improvement measures for frozen and refrigerated cargo services using the importance-performance analysis (IPA). As a result, 15 analysis factors were derived. It was found through independent sample t-test that there is no difference in perception about quality improvement between shippers and operators. Furthermore, four top priority investment areas were derived from the IPA: maintaining temperature and humidity, securing variable storage space, on-time stocking and releasing, and providing information service. Meanwhile, inventory management service ability, on-time stocking and releasing, and reliable cargo storage ability needed urgent improvement. This study has industrial implications in that it proposes practical improvement measures for service quality improvement.

• Korean journal of applied entomology
• /
• v.44 no.2
• /
• pp.125-130
• /
• 2005

The ecological characteristics of the specialist insect predator, Oligota kashmirica benefica, were investigated for developing artificial rearing method with special interest on the oviposition behavior, the pattern of adult emergence and temperature in storage, and its effect on the density of the citrus red mite, Panonychus citri. Female beetle oviposited eggs mainly, $95\%$ of the eggs, on the bottom of leaves of the yuzu tree, and $91.3\%$ of them were covered with ecdysis skin of the red mites or the feces of themselves. The rate of adult emergence of the beetle rose up to $86.7\%$ when the horticultural media was provided for pupation from $60\%$ when it pupated in upland soil. Most larvae, $88\%$ of them, were found from the surface to the depth of 2 cm in the horticultural media. The optimum temperature for the storage of the adult beetle was found to be $12^{\circ}C$, at this temperature the 96.7, 73.3 and $70.0\%$ of the beetle survived for 10, 20, and 30 days, respectively. The control effect of the citrus red mite was appeared highest by releasing the beetle at the rate of one beetle against 150 mites.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.263-263
• /
• 2006

Poly (ethylene glycol)(PEG) - Poly (${\varepsilon}-caprolactone(CL)$) - Poly (D,L lactide(LA) (PCLA-PEG-PCLA) was synthesized by ring-opening polymerization to form temperature sensitive hydrogel triblock copolymer. The triblock copolymer was acrylated by acryloyl chloride. ${\beta}-amino$ ester was used as a pH sensitive moiety, in this study ${\beta}$- amino ester obtained from 1,4-butandiol diacrylate, and 4, 4' trimethylene dipiperidine, it have pKb around 6.6. pH/temperature sensitive penta-block copolymer (PAE-PCL-PEG-PCL-PAE) was synthesized by addition polymerization from acrylated triblock copolymer, 1,4-butandiol diacrylate, and 4, 4' trimethylene dipiperidine. Their physicochemical properties of triblock and penta-block copolymers were characterized by $^1H-NMR$ spectroscopy and gel permeation spectroscopy. Sol-gel phase transition behavior of PAE-PCL-PEG-PCL-PAE block copolymers were investigated by remains stable method. Aqueous media of the penta-block copolymer (at 20 wt%) changed from a sol phase at pH 6.4 and $10^{\circ}C$ to a gel phase at pH 7.4 and $37^{\circ}C$. The sol-gel transition properties of these block copolymers are influenced by the hydrophobic/hydrophilic balance of the copolymers, block length, hydrophobicity, stereo-regularity of the hydrophobic of the block copolymer, and the ionization of the pH function groups in the copolymer depended on the changing of environmental pH, respectively. The degradation and the stabilization at pH 7.4 and $37^{\circ}C$, and the stabilization at pH 6.4 and $10^{\circ}C,\;5^{\circ}C,\;0^{\circ}C$, of the gel were determined. The results of toxicity experiment show that the penta block copolymer can be used for injection drug delivery system. The sol?gel transition of this block copolymer also study by in vitro test ($200{\mu}l$ aqueous solution at 20wt% polymer was injected to mouse). Insulin loading and releasing by in vitro test was investigated, the results showed that insulin can loading easily into polymer matrix and release time is around 14-16days. The PAE-PCL-PEG-PCL-PAE can be used as biomaterial for drug, protein, gene loading and delivery.

• Journal of Radiation Protection and Research
• /
• v.33 no.3
• /
• pp.113-120
• /
• 2008

In this study, The TRITGO code was introduced, which can predict the amount of tritium production, it's transport, removal, distribution and the level of contamination for the produced hydrogen by the tritium on the VHTR (very high temperature gas cooled reactor). The TRITGO code was improved so that the permeation to the IS Iodine Sulfide) loop for producing the hydrogen can be simulated. The contamination level of the produced hydrogen by the tritium was predicted by the improved code for the VHTR with 600MW thermal power. The contamination level for the produced hydrogen by tritium was predicted as 0.055 Bq/$H_2-g$. This level is three order of lower than the regulation value of 56 Bq/$H_2-g$ from Japan. From this study, the following results were obtained. it is important that the fuel coating (SiC layer) should be kept intact to prevent the tritium from releasing. Also it is necessary that the level of impurity such as 3He and Li in the helium coolant and the reflector consisting of the graphite should be kept as low as possible. It was found that the capacity of the purification system for filtering the impurities directly from the coolant will be the important design parameter.