• Pediatric Infection and Vaccine
• /
• v.17 no.2
• /
• pp.137-147
• /
• 2010

Purpose : The purpose of this study is to evaluate the usefulness and limitation of QuantiFERON-TB Gold (QTB) for diagnosis of latent tuberculosis in children. Methods : The medical records of 112 children who were tested by tuberculin skin test (TST) and QTB for detection of latent tuberculosis (TB) in Eulji General Hospital during the period from January 2007 to June 2009 were retrospectively reviewed. Results : Of the 112 participants, the clinical TB group included 15 (13.4%), the contact group included 43 (38.4%), and the non-contact group included 54 (48.2%). Positive rates of TST and QTB were 100% and 80% in the clinical TB group, 64% and 14% in the close contact group, 27% and 0% in the casual contact group, and 52% and 2% in the non-contact group, respectively. Sensitivity of QTB was 80.0% and specificity was 92.6%. Agreement between QTB and TST was poor ($\kappa$=0.209). We also confirmed that the positive rate of QTB increased as the age of the patient increased (P=0.011). A QTB indeterminate result was observed in 11 (9.8%) subjects. QTB was retested in 15 subjects. In 5 of the 6 subjects who had positive results initially, positive results persisted for a median 2.2 months after termination of treatment. Conclusion : Although QTB was associated with several problems, including low sensitivity and a high rate of indeterminate results, it had clinical importance due to its high specificity. We found good correlation with regard to exposure and QTB positivity, including that of young children under 5 years of age. However, clinical application of interferon-$\gamma$ releasing assay for young children for diagnosis of active and latent tuberculosis will require additional prospective studies.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.1
• /
• pp.135-141
• /
• 1997

The early studies demonstrated that the relative amount of FSH was important for stimulating normal ovarian activity and demonstrated the existence of a threshold level for FSH, above which follicular growth was activated. It was found that only a modest increase in circulating FSH level above the threshold (between 10 and 30%) was required to stimulate folliculogenesis. In addition, FSH is primary responsible for initiating estradiol production through the activation of the aromatase enzyme system in granulosa cells, follicular secretion and growth. LH on the other hand, plays a supportive role in ovarian steroidogenesis, stimulating the ovarian thecal cells to produce androgen, the precursor for estradiol synthesis. But there is now an increasing number of reports in the literature demonstrating an adverse effect of LH on fertility and miscarriage in infertile and fertile women. So HP-FSH is the drug of a highly purified FSH preparation which has a higher specific activity and far fewer impurities than FSH. This study was performed to evaluate the efficacy and safety of HP-FSH administered (SC; subcutaneous) versus FSH(IM; intramuscular) for ovulation induction. 20 candidates patients for ovulation induction were participated. All patients underwent pituitary desensitizing with a long gonadotropin-releasing hormone (GnRH) agonist protocol and ovulation induction was started with HP-FSH SC (10 patients; group I) or FSH IM (10 patients; group II). After ovulation, outcome of ovulation induction and local reaction of injection site were compared. There were no difference of outcome of ovulation in two groups except pregnancy rate/embryo transfer. Group I had a higher pregnancy rate/ embryo transfer than Group II (44.4% Vs 28.6%). Pain, redness, tenderness, bruising and itching when the injection received on the first 5 days of treated (50 SC and 50 IM injections) were assessed. There were no significant difference (P>0.05) in the incidence of tenderness, bruising and itching between the IM and SC injection. But IM injection (FSH) had a tendency of higher above incidence. The number of reports of pain, redness were significantly increased in IM injection group (P<0.05). These results indicate that SC administration of HP-FSH has been shown to be as effect for superovulation as traditional gonadotropins, with an improved safety profile due to the removal of extaneous proteins.

• Clinical and Experimental Reproductive Medicine
• /
• v.42 no.4
• /
• pp.163-168
• /
• 2015

Objective: To investigate the impact of fibroids on the blood flow of the uterine and subendometrial arteries and in vitro fertilization (IVF) outcomes. Methods: In this study, we analyzed 86 IVF/intracytoplasmic sperm injection (ICSI) cycles in which a gonadotropin-releasing hormone antagonist protocol was used for controlled ovarian stimulation between January 2008 and March 2009. The subjects comprised 86 infertile women with (fibroid group, n=43) or without (control group, n=43) uterine fibroids. Results: Patient characteristics were similar between the fibroid and control groups. The IVF/ICSI outcomes in patients with fibroids were similar to those of patients in the control group. The resistance index (RI) and pulsatile index (PI) of the uterine and subendometrial arteries on the day of embryo transfer were also comparable between the two groups. IVF outcomes and uterine hemodynamics in patients with multiple (${\geq}2$) fibroids were similar to those of patients with a single fibroid. However, clinical pregnancy and implantation rates were significantly lower in patients with fibroids who experienced uterine cavity distortion than in patients with fibroids who had a normal uterine cavity (both p<0.05). The RI and PI of the subendometrial artery were significantly higher on the day of embryo transfer in patients with fibroids who experienced uterine cavity distortion than in patients with fibroids who had a normal uterine cavity (both p<0.05). Conclusion: Fibroids which distorting the uterine cavity might impair the subendometrial artery blood flow clinical pregnancy rate and embryo implantation rate in infertile patients undergoing IVF. Otherwise, IVF outcomes were not influenced by the presence of uterine fibroids.

• Clinical and Experimental Reproductive Medicine
• /
• v.42 no.4
• /
• pp.149-155
• /
• 2015

Objective: The goal of this study was to investigate the relationship between serum progesterone (P4) levels on the day of human chorionic gonadotropin (hCG) administration and the pregnancy rate among women undergoing controlled ovarian stimulation for in vitro fertilization (IVF) or intracytoplasmic sperm injection-embryo transfer (ICSI-ET) using a flexible antagonist protocol. Methods: This prospective study included 200 IVF and ICSI-ET cycles in which a flexible antagonist protocol was used. The patients were divided into five distinct groups according to their serum P4 levels at the time of hCG administration (0.80, 0.85, 0.90, 0.95, and 1.00 ng/mL). The clinical pregnancy rate (CPR) was calculated for each P4 interval. Statistically significant differences were observed at a serum P4 level of 0.9 ng/mL. These data suggest that a serum P4 concentration of 0.9 ng/mL may represent the optimal threshold level for defining premature luteinization (PL) based on the presence of a significant negative impact on the CPR. Results: The CPR for each round of ET was significantly lower in the PL group defined using this threshold (25.8% vs. 41.8%; p=0.019), and the number of oocytes retrieved was significantly higher than in the non-PL group ($17.3{\pm}7.2$ vs. $11.0{\pm}7.2$; p=0.001). Elevated serum P4 levels on the day of hCG administration were associated with a reduced CPR, despite the retrieval of many oocytes. Conclusion: Measuring serum P4 values at the time of hCG administration is necessary in order to determine the optimal strategy for embryo transfer.

• Korean Journal of Weed Science
• /
• v.10 no.3
• /
• pp.202-206
• /
• 1990

Field experiment was conducted to develop a model of controlled release of oxyfluorfen by using various split applications. Rice and some weed species was included in this study. The models of split applications were 10-10-0. 10-10-10. 20-20-0, 20-10-10. 20-20-20, 0-40-0, and 0-0-0g/Ha at 3days before transplanting, and 11 days after transplanting, respectively. Rice injury appeared dispeared at 20 g/Ha of oxyfluorfen on low leaf sheath but disappeared at few days. The injury was reduced by split application even at the same rate of application. However, no injury was siginificant at 30 days after transplanting. Barnyardgrass, Monochoria, and arrowhead were most susceptible to oxyfluorfen, but bulruch and most perennial weeds recovered after temporary growth inhibition. Therefore, to develop oxyflourfen for use in rice transplanting of adult rice seedling, split application with reduced rates, and development of expected to be tank-mixed or premixed with other perennial herbicides to obtain droad spectrum of weeds.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.3
• /
• pp.143-154
• /
• 2013

Purpose: This study was to find efficacy of integrin alpha2 (${\alpha}_2$) and epidermal growth factor receptor (EGFR) as tumor marker of oral squamous cell carcinoma (SCC) and clarify the selective cell death effect of anti-integrin ${\alpha}_2$ and anti-EGFR on SCC cells, additionally testify conjugated gold nanoparticles (GNP) with air plasma for selective cell death of oral SCC. Methods: Expression of integrin ${\alpha}_2$, EGFR on human SCC cells (SCC25) were examined by western blot. SCC25 cells were treated with anti-integrin ${\alpha}_2$, anti-EGFR and analysed by Hemacolor staining, immunoflorescence staining, FACS flow cytometry. Conjugated GNP with integrin ${\alpha}_2$, EGFR antibody were treated by air plasma on SCC cells. Results: Integrin ${\alpha}_2$ and EGFR were over-expressed on SCC25 cells than normal lung WI-38 cells. The cell viability rate of SCC25 cells treated with anti-integrin ${\alpha}_2$, anti-EGFR was lower than WI-38 cells. The concentration changes of nucleus, releasing cytochrome c and apoptosis inducing factor (AIF) from mitochondria to cytosol were observed. The changes of proteins related with apoptosis were observed. Increase of bax, bcl-xL, activation of caspase-3, -7, -9, and fragmentation of PARP, DFF45 and decrease of lamin A/C in SCC25 cells were observed. In FACS, increase of sub-$G_1$ and S phase was observed. Cell cycle related proteins, Such as cyclin D1, cyclin dependent kinase (CDK) 4, cyclin A, cyclin E, CDK 2, p27 were decreased. After SCC25 cells treated with conjugatged GNP-Integrin ${\alpha}_2$, GNP-EGFR, additionally air plasma, the cell death rate was significantly increased. Conclusion: Integrin ${\alpha}_2$, EGFR were over-expressed in oral SCC cells. Anti-integrin ${\alpha}_2$, anti-EGFR in SCC25 cells induced apoptosis selectively. When GNP-anti integrin ${\alpha}_2$, GNP-anti EGFR were treated with air plasma on SCC25 cells, cancer cells were died more selectively. GNP-anti integrin ${\alpha}_2$, GNP-anti EGFR with air plasma could be treatment choice of oral SCC.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.182-190
• /
• 2017

All liquids contain a small amount of gaseous components and the amount of gases dissolved in a liquid is in accordance with Henry's Law. In a multi-stage thermal-type seawater desalination plant, as the supplied seawater undergoes variations in temperature and pressure in each evaporator, the gases dissolved in the seawater are discharged from the liquid. The discharged gases are carbon dioxide, nitrogen, oxygen, and argon, and these emitted gases are non-condensable. From the viewpoint of convective heat transfer, the evaluation of non-condensable gas released during a vacuum evaporation process is a very important design factor because the non-condensable gases degrade the performance of the cooler. Furthermore, in a thermal-type seawater desalination plant, most evaporators operate under vacuum, which maintained through vacuum system such as a steam ejector or a vacuum pump. Therefore, for the proper design of a vacuum system, estimating the non-condensable gases released from seawater is highly crucial. In the study, non-condensable gases released in a thermal-type seawater desalination plant were calculated quantitatively. The calculation results showed that the NCG releasing rate decreased as the stage comes getting a downstream and it was proportional to the freshwater production rate.

• Korean Journal of Microbiology
• /
• v.37 no.4
• /
• pp.317-324
• /
• 2001

We have previously developed three stage methane fermentation system capable of digesting food wastes effectively and then releasing high organic wastewater as a final product. In this study, we tried to devise an ecological water treatment system, which can efficiently remove the nitrogen and phosphorus contained in the organic wastewater. The system was made of microbiological filters, algae, and waterfleas. Of two species of alga tested, Selenastrum capricornutum showed higher growth rate and more efficiently removed the nitrogen from the wastewater than by Chlorella sp. In addition, the highest growth rate and the nitrogen removal efficiency could be obtained when high concentrations of $Mg^{2+}\; and\; Ca^{2+}$ were added to the diluted wastewater and the molar ratio of nitrogen to phosphorus was adjusted to 10 : 1. In this study the population relationship between alga and water flea was also examined in a test tube. The initial number of algal cells decreased as the waterflea population increased. However, the number of algal cells gradually increased again when waterflea population decreased partly due to the environmental resistance. From these results, it was believed that the ecological water treatment system could be used for removing the nitrogen and phosphorus from organic wastewater very effectively. Moreover, the waterflea cultured by this system as a final predator could be used as a good foodstuff for fishes.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.201-205
• /
• 2007

Biodegradable polymers such as polylactide, polyglycolide and poly (lactide- co-glycolide) (PLGA) have been extensively investigated because of easily controlled drug release rate, completely degradable materials without the toxic by-product, and good biocompatibility. But, according to the bulk erosion property of PLGA in vitro test, it had the disadvantage that first-order release reduced releasing amount slowly after excessive initial burst. In this study we used PLGA powder obtained through recrystallization to revise bulk erosion property of PLGA. The PLGA used in this study was prepared by vacuum drying method and to estimate release profiles of BCNU loaded PLGA wafer. We also evaluated the release profile of drug with the water soluble additive. It was found that the drug loaded PLGA recrystallized by vacuum drying method exhibited the initial burst and the constant rate of drug release compared to that prepared by a conventional method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.306-310
• /
• 2005

The comparison in release rate constant and properties of extracts from extruded raw ginseng and extruded white ginseng was conducted to apply extrusion process for manufacturing of released ginseng tea bag. Dry raw ginseng and white ginseng powder were extruded at 20∼30% moisture content and 200∼300 rpm by using an experimental twin-screw extruder. Browness and redness (both indicated the releasing of saponin and ginsenosides) were increased with the increase in the screw speed and the decrease of moisture content. Crude saponin and water solubility index (WSI) of both ginseng also share the same behaviour against the level of screw speed and moisture content, as well as browness and redness. The particle size effects of extruded raw ginseng at 20% and 28% moisture content on absorbance of released extract at 260 up to 560 nm, WSI, and water absorption index were determined. While particle size decreased from 800∼1000 nm to 200∼500 nm, absorbance and WSI are decreased. Absorbance and WSI shown increasing level while moisture content was decreased. In conclusion, the formation of pores by expansion and disruption of cell wall in extrusion cooking were obviously responsible to increase the amount of released extract of extruded ginseng and its WSI as well. The extrusion process turns out be the efficient process for manufacturing of commercial ginseng tea product than those of other thermal processes.