• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.356-361
• /
• 2003

The objective of this study is a qualitative comparison between line-integrated OH chemiluminescence ($OH{\ast}$) image and its Abel inversion image at different phase of the oscillating pressure field. PIV(Particle Image Velocimetry) measurements were conducted under non-reacting conditions to see the global flow structure. Also NOx emission was measured to investigate the effect of fuel-air premixing on combustion instability and emission characteristics. Experiments were carried out in an atmospheric pressure, laboratory-scale dump combustor operating on natural gas. Combustion instabilities in present study exhibited a longitudinal mode with a dominant frequency of ${\sim}341.8$ Hz, which corresponded to a quarter wave mode of combustor. Heat release and pressure waves were in-phase when instability occurred. Results gave an insight about the location where the strong coherence of pressure and heat release existed. Also an additional information on active control to suppress the combustion instabilities was obtained. For lean premixed combustion, strong correlation between $OH{\ast}$ and NOx emissions was expected largely due to the exponential dependence of thermal NOx mechanism on flame temperature.

• PNF and Movement
• /
• 제18권2호
• /
• pp.245-254
• /
• 2020

Purpose: The study investigated the effects of extracorporeal shock wave therapy with myofascial release techniques (ESWT+MFR) on pain, movement, and function in patients with myofascial pain syndrome. Methods: Forty participants with upper trapezius trigger points were recruited and randomly allocated to two groups: an experimental group (n = 20) and a control group (n = 20). The experimental group performed the ESWT+MFR, and the control group performed only myofascial release techniques. Each group was treated for 15 minutes, twice a week for four weeks. Pain was assessed using a visual analogue scale and a pressure pain threshold measure. Movement was assessed by cervical range of motion, and cervical and shoulder function were assessed on the Constant-Murley Scale and the Neck Disability Index before and after treatment. Results: The results indicate statistically significant improvements in the two groups on all parameters after intervention as compared to baseline (p < 0.05). As compared to the control group, the experimental group showed statistically significant improvements on the visual analogue scale and pressure pain threshold, cervical range of motion (except rotation), and on the Neck Disability Index (p < 0.05). Conclusion: The ESWT+MFR is more effective than myofascial release techniques for pain, movement, and function in patients with myofascial pain syndrome and would be clinically useful for physical therapists treating myofascial pain syndrome.

• 한국식품과학회지
• /
• 제32권1호
• /
• pp.132-139
• /
• 2000

본 연구는 분무건조를 이용한 미세캡슐화 기술을 이용하여 유화압력 및 분무건조에 있어서 송풍 온도와 분무 속도를 최적화하는데 목표를 갖고 수행되었다. 분석지표로 유화액의 유화안정성과 flavor release를, 분무건조 분말의 total oil, surface oil, flavor release, 흡습성을 측정하고, SEM에 의해 분말의 형태를 관찰하였다. Wall system을 이용하여 piston-type homogenizer의 압력을 달리하여 실험한 결과 향기성분의 미세캡슐화를 위한 최적 유화압력은 20.7MPa이었다. 분무건조공정에 있어서 송풍 온도와 분무 속도를 독립변수로, total oil retention, surface oil content, flavor release를 종속변수로 반응 표면 분석법을 행한 결과 송풍 온도는 $170{\circ}C$, 분무 속도는 15,000rpm이 우수한 공정 조건임을 예측 할 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제16권6호
• /
• pp.829-838
• /
• 2002

A constant volume combustion chamber is used to investigate the flame kernel development of gasoline air mixtures under various ignition systems, ignition energies and spark plugs. Three kinds of ignition systems are designed and assembled, and the ignition energy is controlled by the variation of the dwell time. Several kinds of spark plugs are also tested. The velocity of flame propagation is measured by a laser deflection method, and the combustion pressure is analyzed by the heat release rate and the mass fraction burnt. The results represent that as the ignition energy is increased by enlarging either dwell time or spark plug gap, the heat release rate and the mass fraction burnt are increased. The electrodes materials and shapes influence the flame kernel development by changing he transfer efficiency of electrical energy to chemical energy. The diameter of electrodes also influences the heat release rate and the burnt mass fraction.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제1권1호
• /
• pp.13-25
• /
• 2014

In the current study, a drug-eluting stent coated with biodegradable polymers and sirolimus was developed by using an ultrasonic nanocoater and characterized in aspects of surface smoothness and coating thickness. In addition, in vitro release profiles of sirolimus by changing top coating layer with different biodegradable polymers were investigated. Smooth surfaces with variable thickness could be fabricated by optimizing polymer concentration, flow rate, nozzle-tip distance, gas pressure, various solvents and ultrasonic power. Smooth surface could be generated by using volatile solvents (acetone, chloroform, and methylene chloride) or post-treating with solvent vapor. Coating thickness could be controlled by varying injection volume or polymer concentration, and higher concentration could reduce the coating time while obtaining the same thickness. The thickness measurement was the most effectively performed by a conventional cutting method among three different methods that were investigated in this study. Release profiles of sirolimus were effectively controlled by changing polymers for top layer. PLGA made the release rate 3 times faster than PDLLA and PLLA and all top layers prevented burst release at the initial phase of profiles. Our results will provide useful and informative knowledge for developing drug-eluting stents, especially coated with biodegradable polymers.

• Journal of Pharmaceutical Investigation
• /
• 제36권1호
• /
• pp.11-17
• /
• 2006

The objective of this study was to confirm the effect of the type of dissolution media and paddle speed on nifedipine (ND) release profile from osmotic granule and the storage stability. Osmotic granule was manufactured by fluidized bed coating method. At each coating step, morphology of osmotic granule was differed. The size of osmotic granule was $750\;{\mu}m$ at 3 wt% membrane thickness. ND release was changed in diverse dissolution media, paddle speed. ND release is governed by not only osmotic pressure but diffusion from osmotic granule. ND release from osmotic granule decreased as storage period increased. These may be caused by liquid excipient which has low molecular weight. Storage stability of osmotic granule could be improved by removing liquid excipient from semipermeable membrane.

• International Journal of Automotive Technology
• /
• 제4권3호
• /
• pp.125-133
• /
• 2003

Several models for the evaluation of Gross Heat Release from the internel combustion engine (ICE) are often used in literature. One of these is the First Law - Single Zone Model (FL-SZM), derived from the First Law of Thermodynamic. This model present a twice advantage: first it describes with accuracy the physic of the phenomenon (charge heat release during the combustion stroke and heat exchange between gas and cylinder wall); second it hat a great simplicity in the mathematical formulation. The evaluation of Heat Release with the FL-SZM is based on pressure experimental measurements inside the cylinder, and ell the assumption of several parameters as the specific heat ratio, wall temperature, polytropic exponent for the motored cycle evaluation, and many others. In this paper the influence of gases thermodynamic properties on Cross Heat Release has been esteemed. In particular the influence of an appropriate equation for k=k(T) (specific heat ratio vs. temperature) which describes the variations of gases thermodynamic properties with the mean temperature inside the cylinder has been evaluated. This equation has been calculated by new V order Logarithmic Polynomials (VoLP), fitting experimental gases properties through the least square methods.

• 국제물리치료학회지
• /
• 제11권4호
• /
• pp.2237-2243
• /
• 2020

Background: The myofascial release technique is known to be an effective technique for increasing posterior fascia flexibility in short hamstring syndrome (SHS) subjects. But therapeutic mechanism of myofascial relaxation remains unclear. Recently, the theory of autonomic nervous system domination has been raised, however, a proper study to test the theory has not been conducted. Objectives: To investigate whether the application of the myofascial release technique can induce changes in the autonomic nervous system and affect the secretion of stress hormones and myofascial relaxation. Design: Quasi-experimental study. Methods: Twenty-four subjects with SHS were randomly divided into two groups. In the experimental group, the suboccipital muscle inhibition (SMI) technique was applied to the subjects for 4 min in supine position, and in the control group, the subjects were lying in the supine position only. A forward flexion distance (FFD) was conducted, blood pressure, heart rate, and cortisol levels were measured before and after the intervention and 30 min after intervention to determine myofascial relaxation and stress hormone levels. The evaluation was conducted separately in blind by an evaluator. Results: A FFD decreased in the experimental group, no change in cortisol was observed. On the contrary, a decrease in cortisol appeared in the control group after 30 minutes. Conclusion: The myofascial release technique is an effective treatment to increase the range of motion through posterior superior myofascial chain, but there is no evidence that myofascial release technique can control the autonomic nervous system.

• Archives of Plastic Surgery
• /
• 제42권2호
• /
• pp.150-158
• /
• 2015

Background Fat is widely used in soft tissue augmentation. Nevertheless, it has an unpredictably high resorption rate. Clinically, external expansion with negative pressure is used to increase fat graft survival. In this study, fat graft recipient sites were preconditioned by external application of negative pressure in order to test for improvements in vascularity and fat graft survival. Methods Negative pressure was applied randomly to either the left or right dorsal ear of 20 New Zealand male white rabbits at a pressure of -125 mm Hg. The negative pressure was removed one week after the skin perfusion was measured. The skin flap at each ear was elevated, and 1 g of fat was grafted above the dorsal perichondrium. After one week, the fat weight, microvessel density, mature vessel density of the skin and fat, and amount of glycerol released were measured. Three months after the grafting, the same measurements were performed, with the exception of glycerol release. Results The fat survival rate of the experimental group ($75.4%{\pm}3.9%$) was higher than that of the control group ($53.1%{\pm}4.3%$) (P<0.001). Skin perfusion was higher in the experimental group. The glycerol release in the experimental group was significantly higher than in the control. The microvessel density of the skin and fat was significantly higher in the experimental group. Three months after the grafting, the skin and fat mature vessel density was significantly higher in the experimental groups. Conclusions Negative pressure prior to fat grafting increased the vascularity of the recipient site, and, accordingly, enhanced fat graft survival.

• 대한물리치료과학회지
• /
• 제31권1호
• /
• pp.1-15
• /
• 2024

Background: This study was conducted to apply active release techniques to male youth basketball players to help improve physical development and damage prevention and improve performance through improved balance and functional movement. Design: Randomized control trial. Methods: The subjects included 33 youth basketball players who were randomly assigned to the experimental group (n=17) and the control group (n=16). For the experimental group, the active release technique was applied to the hip muscles, calf muscles, posterior thigh muscles based on the distribution of injuries surveyed in youth basketball players in the Korean Basksetball League. The Y-balance test and the functional reach test (FRT) were used to assess balance and the Functional Movement Screen (FMS) was used to assess functional movement. Interventions were conducted twice a week for 4 weeks at 40 minutes per session. The experimental group was the active release technique group, and static stretching, a common exercise therapy technique, and self-myofascial release using a foam roller were applied for 20 minutes. The control group received general exercise therapy and placebo active release technique. The placebo active release technique applies pressure only. results:The experimental group showed a greater improvement in balance, as evidenced by the FRT, compared to the control group, which received general exercise treatment. However, there was no statistically significant difference in improvement between the 2 groups. In the case of the experimental group, the difference in the Y balance test before and after the intervention was larger than that of the control group, but there was no statistically significant difference. Significant improvement was found in functional movement, as evidence by the FMS, for the trunk stability test (p < 0.05), in-line lunge test (p < 0.05), rotational stability test (p < 0.05), total score (p < 0.05). Conclusion: In this study, the active release technique improved the balance and functional movement of young basketball players more than general exercise therapy. The application of the active release technique is therefore expected to assist in physical development, prevent damage, and improve the performance of youth basketball players.