• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.109-115
• /
• 2009

Recently, the relay communication is focused for the power saving and coverage extension of ad-hoc networks. For the high date rate transmission, it is proposed to adapt OFDMA relays. In this paper, we assume the 2 hop cooperative OFDMA relays between the source and the destination. The performance of 3 different relaying methods are derived and compared. We noticed that the selective OFDMA relaying method has the best performance followed by opportunistic OFDMA relaying and repetition-based OFDMA relaying method under the same threshold mutual information rate.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.71-78
• /
• 2013

Recently, the opportunistic incremental relaying systems have been studied to improve the system performance effectively in wireless fading channel. Most of the performance analysis of the system includes a source-destination direct link. And there are few analysis which consider source-relay-destination indirect paths only. Therefore this paper proposes a transmission protocol which relays the source information using the selected relay from the partial channel information at the first stage in an opportunistic incremental relaying system. If the transmission fails, the selected best relay from the full channel information retransmits the information to the destination incrementally. The performance of the proposed system is derived analytically and verified from Monte Carlo simulation. The derived results can be applied to the system design and the performance estimation of the mobile systems and the bidirectional TV broadcasting systems which adapt an opportunistic incremental relaying system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.61-66
• /
• 2011

Cooperative Communication using relays which include network separated into fixed cooperative relaying and incremental cooperative relaying defending on method receiving signal from a source. If some nodes included network is Primary user ad source and destination, another is Secondary user as relay, The nodes included network excepting source can help PU transmit signal. In the case of all of SU playing a role as relay, destination can get diversity gain, but useless time slot is consumed for transmitting signal. So in this paper, we analysis cooperative relaying which a node succeeding to sense primary signal send signal to destination. We use matlab simulation tool and consider AF, DF, fixed relaying, incremental relaying

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.53-58
• /
• 2011

Recently, MIMO technology, which can improve data rate, link reliability and diversity order, has been widely studied. However, due to the limitation of size, cost and complexity, it is difficult to equip multiple antennas in mobile devices. To overcome this problem, the cooperative communication scheme has been proposed. In this scheme, each terminal shares its single antenna to form a virtual MIMO environment. However, in conventional cooperative scheme, e.g, decode-and-forward, amplify and forward, the spectral efficiency is decreased if there are many terminals taking part in the cooperation. Therefore, the incremental relaying scheme has been proposed to solve this problem. In this paper, we consider various models using incremental relaying technique. In addition, the position of relay is investigated in order to obtain optimal performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.65-71
• /
• 2016

Cooperative relaying systems have been studied actively to improve the system performance effectively in wireless fading channels. Most of the cooperative relay studies are assumed fixed relay, recently the performance analysis of the cooperative relaying systems with spatially random relays considering the practical mobile environment are introduced. However the comparative studies for relay selection methods of incremental cooperative relay systems, the performance of which is influenced by the selection methods, have not been studied. Therefore we derive the performance of the system which has MRC(Maximal-ratio combining) with Max SNR(signal-to-noise ratio) selection or Max-min SNR selection, respectively. And the outage performances of the system with Max or Max-min selection method are compared for different transmit power allocation to the source and to the relays. The analytical results serve as useful tools for relay selection and power allocation to transmit nodes for opportunistic incremental relaying systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2095-2110
• /
• 2015

This paper presents a design for a throughput-efficient online relay selection scheme for dual-hop multi-relay cooperative networks. Problems arise with these networks due to unpredictability of the relaying link quality and high time-consumption to probe the dual-hop link. In this paper, we firstly propose a novel probing and relaying protocol, which greatly reduces the overhead of the dual-hop link estimation by leveraging the wireless broadcasting nature of the network. We then formulate an opportunistic relay selection process for the online decision-making, which uses a tradeoff between obtaining more link information to establish better cooperative relaying and minimizing the time cost for dual-hop link estimation to achieve higher throughput. Dynamic programming is used to construct the throughput-optimal control policy for a typically heterogeneous Rayleigh fading environment, and determines which relay to probe and when to transmit the data. Additionally, we extend the main results to mixed Rayleigh/Rician link scenarios, i.e., where one side of the relaying link experiences Rayleigh fading while the other has Rician distribution. Numerical results validate the effectiveness and superiority of our proposed relaying scheme, e.g., it achieves at least 107% throughput gain compared with the state of the art solution.

• Journal of Information Processing Systems
• /
• v.14 no.5
• /
• pp.1272-1285
• /
• 2018

The paper presents a novel embedded multifunctional media sever (EMMS) for mobile devices to receive various media programs. Being different from other contemporary system research, the paper mainly studies how to design a reception solution for terrestrial digital television (DTV) on mobile devices and how to enable mobile devices can receive DTV program, enjoy video-on-demand (VOD), achieve video surveillance and relay Internet video program via local Wi-Fi simultaneously. In the system design, we integrate broadcasting-terrestrial DTV tuner, streaming media re-transmission system, VOD disk, video camera and access interface to the Internet into EMMS, which can either receive terrestrial DTV radio signals and demodulate out digital transport stream (TS), or can read streaming media bit-stream from VOD disk, surveillance camera or access interface to the Internet. The experimental results show the proposed system is stable and quality-efficient. Comparing with the other systems, the proposed system has the least packet loss rate and response time.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.266-274
• /
• 2018

Securing field screens through LTE broadcasting is a very valuable technology in news production because of its locality and concurrency. TV has the advantage of being able to deliver news faster than newspapers and make live coverage on the scene of events and events. To maximize this, not only middle-end broadcasters but also existing broadcasting stations are taking an active role in broadcasting using LTE. However LTE broadcasting has yet to secure any conflicting values of broadcasting stability and securing high-definition. The key to solving this difficulty is the transmission rate of Bit Rate. This paper compares the Bit Rate transmission method, which is variable and fixed, to provide more on-site screens through LTE, and presents the Bit Rate adjustment method as a method of screen stabilization through experiment. Consequently, the most stable broadcast screen can be obtained when transmitting and connecting it to broadcasting in a variable 5M method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11A
• /
• pp.853-860
• /
• 2011

In this paper, we proposed a transmission scheme for a full-duplex relay system that minimizes outage probability. A relay system with the full-duplex relay can mitigate resource inefficiency of a half-duplex relay system. However, the mobile station suffers from the interference because the base station and the relay station transmits signal simultaneously to the mobile station. First, we suggest a layered broadcasting for full-duplex relaying. Second, we derive an optimal power allocation for the layered broadcasting in terms of the outage probability minimization. The proposed algorithm shows better performance than a half-duplex relaying system with and without the diversity, and a conventional full-duplex relaying system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.53-58
• /
• 2011

In this paper, we firstly propose a novel cooperative transmission protocol, which utilizes the advantages of mid-notes in the route from the source to the destination. Taking benefits from balancing between the received packet from the source and acknowledge message from the destination, the mid-node between the source and the destination is firstly considered to be the broadcaster. If its signal is successfully received from the source, it leads to consider the next nodes, which has closer distance to the destination than it. If one of these nodes correctly receives the signal, it performs broadcasting the signal to the destination instead of mid-node. Otherwise, the mid-node directs attention to these nodes being near to the destination. As the result, some nodes are unnecessary to be considered and passed over time. After that, we analyze some published selection relaying schemes based on geographic information to choose the best nodes instead of the instantaneous SNR as before. Finally, simulation results are given to demonstrate the correctness of the performance analyses and show the significant improvement of the selection relaying schemes based geographic information compared to the other ones.