• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.465-467
• /
• 2010

This paper proposes MIMO two-way cooperative relay scheme to optimize the end to end capacity in wireless multi-hop mesh network. The basic idea is to perform data transmission via multi-hop relay nodes, in equidistant topology, this method is quite efficient. However, on one hand this topology is very rare in practical situation, on the other hand, in real practical situation where the topology is most likely non equidistant, the end to end capacity significantly degrades due to bottleneck link caused by uneven SNR. Moreover, the end to end capacity degrades at high SNR due to overreach interference from far nodes existing in multi-hop relay networks. In this paper, MIMO two-way cooperative relay in the region of non equidistant nodes is found efficient to improve the end to end capacity. The proposed scheme is validated using numerical simulation.

• 한국통신학회논문지
• /
• 제35권5C호
• /
• pp.479-486
• /
• 2010

본 논문에서는 비동기 협력 통신 시스템을 위한 주파수 분할 다중화 (orthogonal frequency division multiplexing: OFDM) 기반의 새로운 저복잡도 Alamouti 시공간 전송 기법을 제안한다. Li와 Xia에 의해 제안된 기존 기법은 목적지 노드에서 Alamouti 부호 구조를 생성하기 위해 릴레이 노드와 목적지 노드에서 추가적인 시간 전환 및 이동 연산을 요구한다. 뿐만 아니라, 릴레이 노드에서 시간 동기화 오류가 발생할 경우 심각한 비트 오류율 (bit error rate: BER) 성능 열화가 초래된다. 제안한 기법은 소스 노드에서의 심볼 조합과 릴레이 노드에서의 간단한 부호 반전 및 허수 곱을 통하여 시간 전환 및 이동 연산을 사용하지 않아도 목적지 노드에서 부 반송파 별로 Alamouti 부호 구조를 생성하여 협력 다이버시티 이득을 획득한다. 또한, 릴레이 노드에서의 순환 전치 추가 연산을 이용하여 기존 기법에서 발생하는 릴레이 노드의 시간 동기화 문제를 해결한다. 모의실험 결과를 통해 제안한 기법은 기존 기법에 비해 데이터 전송률은 절반으로 감소하지만 두 배만큼 증가한 차수가 4인 다이버시티 이득을 얻으며, 릴레이 노드에서 시간 동기화 오류가 존재할 때도 우수한 BER 성능을 획득하는 사실을 확인한다.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.363-372
• /
• 2008

In this paper, knowledge-based approach using Support Vector Machines (SVMs) are used for estimating the coordinated zonal settings of a distance relay. The approach depends on the detailed simulation studies of apparent impedance loci as seen by distance relay during disturbance, considering various operating conditions including fault resistance. In a distance relay, the impedance loci given at the relay location is obtained from extensive transient stability studies. SVMs are used as a pattern classifier for obtaining distance relay co-ordination. The scheme utilizes the apparent impedance values observed during a fault as inputs. An improved performance with the use of SVMs, keeping the reach when faced with different fault conditions as well as system power flow changes, are illustrated with an equivalent 265 bus system of a practical Indian Western Grid.

• 전자공학회논문지
• /
• 제49권12호
• /
• pp.10-19
• /
• 2012

본 논문에서는 AMC(Adaptive Modulation and Coding) 기법을 적용한 릴레이 프로토콜을 제안한다. AMC 기법은 다양한 변조와 코딩 기법을 통해, 통신 시스템의 전송률과 신뢰도를 향상시킬 수 있다. 본 논문에서는 AMC 기법을 적용한 릴레이 프로토콜의 성능을 분석하고, AMC 기법이 적용된 릴레이 프로토콜이 AMC 기법이 적용되지 않은 기존의 기법과 비교하여 낮은 SNR(Signal to Noise Ratio) 레벨에서 더 좋은 평균 전송률을 제공할 수 있음을 확인하였다. 비적응적 MCS(Modulation and Coding Scheme) 릴레이 프로토콜과 적응적 MCS 릴레이 프로토콜의 성능을 증명하기 위해 LTE-A(Long Term Evolution-Advanced) 파라미터와 함께 몬테카를로 시뮬레이션을 수행하였다. 모의실험 결과, 적응적 MCS가 적용된 시스템에서 AF(Amplify-and-Forward), DF(Decode-and-Forward) 및 DMF(DeModulate-and-Forward) 프로토콜 중 DMF 프로토콜이 낮은 SNR 값에서 가장 좋은 성능을 보이고, 더 좋은 평균 전송률을 제공하는 것을 확인하였다.

• ETRI Journal
• /
• 제36권2호
• /
• pp.280-285
• /
• 2014

In this paper, the optimal power control problem in a cooperative relay network is investigated and a new power control scheme is proposed based on a non-cooperative differential game. Optimal power allocated to each node for a relay is formulated using the Nash equilibrium in this paper, considering both the throughput and energy efficiency together. It is proved that the non-cooperative differential game algorithm is applicable and the optimal power level can be achieved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권10호
• /
• pp.2587-2600
• /
• 2012

It has been demonstrated that choosing an appropriate relay node can improve the transmission rate for the system. However, such system improvement brought by the relay selection may be degraded with the presence of the malicious relay nodes, which are selected but refuse to cooperate for transmissions deliberately. In this paper, we formulate the relay selection issue as a restless bandit problem with the objective to maximize the average rate, while considering the credibility of each relay node, which may be different at each time instant. Then the optimization problem is solved by using the priority-index heuristic method effectively. Furthermore, a low complexity algorithm is offered in order to facilitate the practical implementations. Simulation results are conducted to demonstrate the effectiveness of the proposed trust-based relay selection scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권1호
• /
• pp.202-215
• /
• 2023

This paper proposes a non-orthogonal multiple access (NOMA) based low-complexity relaying approach for multiuser cellular two-way relay channels (CTWRCs). In the proposed scheme, the relay detects the signal using successive interference cancellation (SIC) and re-generates the transmit signal with zero-forcing (ZF) transmit precoding. The achievable data rates of the NOMA-based multiuser two-way relaying (TWR) approach is analyzed. We further study the power allocation among different data streams to maximize the weighted sum-rate (WSR). We re-form the resultant non-convex problem into a standard monotonic program. Then, we design a polyblock outer approximation algorithm to sovle the WSR problem.The proposed optimal power allocation algorithm converges fast and it is shown that the NOMA-TWR-OPA scheme outperforms a NOMA benchmark scheme and conventional TWR schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권3호
• /
• pp.477-493
• /
• 2011

The IEEE 802.16 mobile multi-hop relay (MMR) task group 'j' (TGj) has introduced the multi-hop relaying concept in the IEEE 802.16 Wireless MAN, wherein a relay station (RS) is employed to improve network coverage and capacity. Several RSs can be deployed between a base station and mobile stations, and configured to form a tree-like multi-hop topology. In such architecture, we consider the problem of a path selection through which the mobile station in and outside the coverage can communicate with the base station. In this paper, we propose a new path selection algorithm that ensures more efficient distribution of resources such as bandwidth among the relaying nodes for improving the overall performance of the network. Performance of our proposed scheme is compared with the path selection algorithms based on loss rate and the shortest path algorithm. Based on the simulation results using ns-2, we show our proposal significantly improves the performance on throughput, latency and bandwidth consumption.

• 한국통신학회논문지
• /
• 제22권9호
• /
• pp.2027-2034
• /
• 1997

프레임 릴레이는 망에서의 오류제어와 흐름제어 기능을 제거하여, TI 또는 EI의 속도로 원거리에서 다양한 길이를 갖는 프레임을 전송하고 다중화하는 고속 패킷 교환 기술이다. 그리고 오류제어와 흐름제어의 생략의 결과로 발생하는 망에서의 혼잡을 피하고 복구하기 위해서는 일반적으로 몇가지의 혼잡제어 방식이 쓰이는데, 본 연구에서는 프레임 릴레이망에서 DE비트를 사용하여 전송률을 강제적으로 조정하는 혼잡제어 방식에 대해서 수치적으로 성능해석을 수행하였다. 수치적인 해석을 위하여 각각의 프레임이 Poisson 분포를 따르며 지수분포 길이로 도착한다고 가정하고 시스템의 크기가 K인 경우, 프레임 릴레이 교환기를 하나의 서버와 K-1(1

• 한국정밀공학회지
• /
• 제25권6호
• /
• pp.71-79
• /
• 2008

In the manufacture of flat panel display devices, there is a strong demand for contactless glass panel handling devices that can manipulate a glass panel without contaminating or damaging it. To fulfill this requirement, an electrostatic suspension device far glass panels where the glass panel is supported by electrostatic forces without any mechanical contact is proposed. To implement the system with low cost and compactness, switched-voltage control scheme that is based on the relay feedback control is utilized. Relay feedback control method deploys only a single high-voltage power supply that can deliver a DC voltage of positive and/or negative polarity and thus high voltage amplifiers that are costly and bulky are not needed any more. It is shown that despite the inherent limit cycle property of the relay feedback based control, an excellent performance in vibration suppression is attained due to the presence of a relatively large squeeze film damping originating from the electrodes and levitated object. Using this scheme, a $100{\times}100mm^2$ glass panel was levitated stably with airgap variation decreasing down to $1\;{\mu}m$ at an airgap of $100\;{\mu}m$.