• 풍력에너지저널
• /
• 제13권4호
• /
• pp.5-16
• /
• 2022

In general, a tripod-shaped foundation secures its verticality by repeating penetration and drawing when suction penetration is performed. These repetitive tasks not only require a skilled operator, but are also less efficient. In this study, an automatic slope control system was developed to verify the slope control performance based on tripod suction in a sandy soil environment. The slope of the tripod suction base was measured, and the relative height of each suction bucket was calculated from the center of the tripod with a formula. The control program reduces the pump output of the suction bucket that penetrates too quickly by controlling the suction pressure of each suction bucket by sending an on/off signal to the suction pump according to the relative height. With such repetitive work, the relative height converges to 0 and the verticality of the structure can be secured while suction penetration is performed. As a result of the experiment, the effect of controlling the slope depending on the optimal limit setting height and penetration depth was confirmed, and a vertical degree within 0.5° was ensured. When installing a tripod suction bucket, the automatic tilt control method using the relative height is efficient without relying on the experience of the operator.

• 지질공학
• /
• 제33권2호
• /
• pp.229-240
• /
• 2023

연약지반 개량공사 시 계측기를 설치하여 경제적이고 안전한 시공이 이루어지도록 관리한다. 데이터 분석 시 시간에 따른 침하량 데이터를 활용하여 전체적인 지반 침하 거동을 파악할 수 있지만, 계측지점 간 상호관련성을 분석하기에는 어려움이 있다. 따라서 계측지점 간의 상대적인 압밀침하 거동을 분석하기 위하여, 침하량과 속도를 가공하여 평균 침하량 차이 지수와 기울기 차이 지수로 정의한 후, 평균 침하량 차이 지수 - 기울기 차이 지수(AS_i,j-SDI_i,j) 좌표계에 도시하였다. 계측지점 간 상대적인 압밀침하 거동 분석결과 평균 침하량 차이 지수 - 기울기 차이 지수 좌표계에 나타낸 계측지점 간의 관계가 압밀이 완료됨에 따라 영역 1로 이동하였다. 관측점의 이동 경로를 해당 좌표계에 연속적으로 나타냄으로써 계측지점 간의 상대적인 압밀침하 거동관계를 분석하였으며, 이동경로 방향에 따라 두 계측지점의 압밀침하 거동관계가 안정한 상태인지 불안정한 상태인지 확인할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.764-771
• /
• 2010

The stability analysis method of an unsaturated slope considering the suction stress was performed on the infinite sand slope. During drying and wetting processes, the Soil-Water Characteristics Curve (SWCC) of the sand with the relative density of 75% was measured using the automated SWCC apparatus. Also, the Suction Stress Characteristics Curve (SSCC) was estimated. Based on these results, the stability analysis of an unsaturated infinite slope was carried out considering the slope angle, the weathering zone and the relative change in friction angle as a soil depth. According to the result of slope stability analysis, the safety factors of slope were less than 1 when the slope angles were more than $50^{\circ}$. The safety factors of slope tend to increase with increasing the depth from the ground surface. Especially, the safety factors have a tendency to increase and decrease above near the ground water level due to the suction stress. The maximum safety factor of slope in this analysis was occurred at the Air Entry Value (AEV) of drying process. The influence range of suction stress above the ground water level can be found out and can be defined as the funicular zone which means the metric suction range from the air entry point to the point of residual volumetric water content.

• 한국환경생태학회지
• /
• 제34권5호
• /
• pp.425-435
• /
• 2020

본 연구는 도심지 산지형 공원의 물리적 구조 및 식생구조가 기상에 미치는 영향을 분석하기 위해 물리적 구조인 표고, 경사도, 사면 향, 지형구조와 식생 구조인 현존식생, 흉고직경, 울폐도의 기상과의 평균비교를 실시하였다. 분석 결과, 표고의 경우 상대습도, 풍속, 일사에서 유형 간 차이가 있는 것으로 분석되었으며, 경사도의 경우 풍속을 제외한 모든 기상요소에서 유형 간 차이가 있는 것으로 분석되었다. 사면 향의 경우 기온과 상대습도에서 유형간 차이나 있는 것으로 분석되었다. 지형구조의 경우 계곡부, 사면부, 능선부로 구분하였으며, 상대습도에서 측정 값의 차이가 있는 것으로 분석되었으나 기온, 풍속, 일사량에서는 일정한 경향과 유형간 차이가 미미한 것으로 분석되었다. 식생구조 중 현존식생의 경우 일사량을 제외한 기온, 상대습도, 풍속 항목에서 유형 간 차이가 있는 것으로 분석되었으며, 흉고직경의 경우 기온, 풍속, 일사량 항목에서 유형 간 유의한 차이가 있는 것으로 분석되었다. 울폐도의 경우 기온과 일사량에서 유의한 차이가 있는 것으로 분석되었다. 식생 및 물리적구조가 기상환경에 미치는 영향 분석을 위한 관계분석결과 기온의 경우 경사도와 사면 향, 흉고직경과 울폐도에서 영향을 받는 것으로 분석되었으며, 상대습도의 경우 물리적구조인 표고, 경사도, 사면 향, 지형구조와 식생구조인 현존식생과 울폐도에서 상관성이 분석되었다. 풍속의 경우 표고, 현존식생, 흉고직경에서 상관성이 분석되었으며, 일사량의 경우 경사도와 흉고직경, 울폐도간의 상관성이 분석되었다. 전반적으로 기온과 상대습도, 일사량에 가장 큰 영향을 주는 인자는 울폐도로 분석되었으며, 다음으로 경사도에서 상관관계가 높게 분석되는 경향이 나타났다. 흉고직경 또한 기온과 일사량간의 상관성이 매우 높은 것으로 분석되었으며 풍속과의 상관관계도 나타났으나 상대습도는 통계적인 유의성이 나타나지 않았다.

• 환경생물
• /
• 제24권4호
• /
• pp.337-358
• /
• 2006

The field survey was conducted weekly from April to October in 2004 and 2005 on the sites along the 5.16 road. Sampling sites were made every 100 m height starting from 250 m altitude of both sides of Mt. Halla along 5.16 Road, which crosses the mountain from North to South. Totally 31,698 individuals of 76 species belonged to 25 families were collected. It was July that showed the largest number of species, as 48 species in the northern sloper 42 in the southern slope, and 22 at the highest site (at an altitude of 750 m), while it was April that showed the smallest as 17 species, 15 and 5, respectively. As for monthly fluctuation, the northern slope and the highest site reached their top in August, whereas it was June in the southern slope. In the analyses of similarity (chord distance) of any pair of temporal communities, the closest pair was between June and July in the northern slope area, between July and August in the southern slope and between July and September at the highest site, respectively.

• The Korean Journal of Ecology
• /
• 제7권3호
• /
• pp.119-131
• /
• 1983

The cluster analysis on the distribution of epiphytic lichens on the north, south, east and west slope of Mt. Hanra was carried out by three methods, sum of square algorithm (SSA), prinicipal component analysis (PCA) and multidimensional scaling method(MDS). Analysis of concentration (AOC) was used for the comparison between the lichen communities of north and south slope. The lichen species was identified 35 species by Hale and Culberson technique. The classification of sites by SSA method was divided into two areas in four slopes, and that of species by SSA, PCA and MDS methods was classified into three clusters in east slope, four clusters in south and west slope, and there clusters in north slope. The comparison between north and south slope of the distribution of lichens indicates that loight elevation of north slope (NH; 1600m~1900m) was similar to that of relative low elevation of south slope (SL; 1000m~1300m). The genus lichen, Anaptychia, Parmelia, Lobaria and peltigera was found as the dominant genus in both slopes.

• 터널과지하공간
• /
• 제6권2호
• /
• pp.166-174
• /
• 1996

Stability of rock slope is greatly affected by the geometry and strength of discontinuities developed in the rock mass. In this study an analytical method which is capable of analyzing the effect of relative orientation between the discontinuities and the slope face on the safety of slope by assessing their vector components was used to evaluate the stability and the maximum cut-angle for the proposed slope design. The results of computerized vector analysis revealed that slope area under investigation might be divided into 3 sections of different face directions. The safety factors for benches in each 3 sections were calculated using the limit-equilibrium theory. Then, by utilizing the concept of probabilistic risk analysis, the susceptibility of entire slope failure was estimated. Based on the distribution of safety factor in each bench, the maximum cut angle of each section could be selected differently ot achieve the permanent stability of the entire slope.

• 농촌계획
• /
• 제23권2호
• /
• pp.87-96
• /
• 2017

This study is a basic research with the aim of developing the method of judging the leakage zone by grasping the habitat characteristic of agricultural reservoir slope in inhabiting characteristics appear differently according to natural inhabiting environment. To this end, this study is intending to investigate slope vegetation using a quadrat technique at Sinheung reservoir located at Gwangsi-myeon, Yesan-gun, Chungnam, and to perform the analysis of importance value using relative frequency and relative coverage, etc. Also, this study intended to present the necessity of having to consider the eco-system of the relevant region in time of a reservoir slope afforestation for the time to come by suggesting that the reservoir slope vegetation after a stable period becomes similar to the regional vegetation by comparing this study result with the existing research which carried out the analysis of importance value of forest vegetation for Yesan Region. The reservoir slope vegetation is similar to the indicator species which appear in the regional forest vegetation, so there was a need to select afforestation species in the light of this in time of slope afforestation. As a result of the analysis of the importance value, this study grasped that there was an emergence characteristic similar to the vegetation at a birthplace of a forest fires because growth and development of forest trees, and perennial plants were restricted by annually implemented brush-cutting work, etc.; however, indigo plant and bush clover, etc. were found to show the characteristic differing from this. Consequently, this study was able to confirm that there is the necessity of having to create the Importance Value Table suited for reservoir slopes by region through a lot more data construction in the near future.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.615-620
• /
• 2002

Probability distribution of the sea surface slope is estimated using sun glitter images derived from visible radiometer on Geostationary Meteorological Satellite (GMS) and surface vector winds observed by spaceborne scatterometers. The brightness of the visible images is converted to the probability of wave surfaces which reflect the sunlight toward GMS in grids of 0.25 deg $\times$ 0.25 deg. Slope and azimuth angle required for the reflection of the sun's ray toward GMS are calculated for each grid from the geometry of GMS observation and location of the sun. The GMS images are then collocated with surface wind data observed by three scatterometers. Using the collocated data set of about 30 million points obtained in a period of 4 years from 1995 to 1999, probability distribution function of the surface slope is estimated as a function of wind speed and azimuth angle relative to the wind direction. Results are compared with those of Cox and Munk (1954a, b). Surface slope estimated by the present method shows narrower distribution and much less directivity relative to the wind direction than that reported by Cox and Munk. It is expected that their data were obtained under conditions of growing wind waves. In general, wind waves are not always developing, and slope distribution might differ from the results of Cox and Munk. Most of our data are obtained in the subtropical seas under clear-sky conditions. This difference of the conditions may be the reason for the difference of slope distribution.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.867-872
• /
• 2009

Peak expiratory flow rate(PEF) is one of the most important diagnostic parameters in spirometry. PEF occurs in a very short duration during the forced expiratory maneuver, which could lead to measurement error due to non-ideal dynamic characteristic of the transducer. In such case the initial slope of the flow rate signal determines the accuracy of the measured PEF. The present study considered this initial slope as a parameter to compensate PEF. The 26 standard flow rate signals recommended by the American Thoracic Society(ATS) were flown through the air flow transducer followed by simultaneous measurements of PEF and maximum transducer output$(N_{PEF})$. $N_{PEF}$-PEF satisfied a quadratic equation in general, however, two signals (ATS #2 and #26) having large initial slopes deviated from the fitting equation to a significant degree. The relative error was found to be in a linear relationship with the initial slope, thus, $N_{PEF}$ was appropriately compensated to provide accurate PEF with mean relative error less than only 1%. The 99% confidence interval of the mean relative error was less than a half of the error limit of 5% recommended by ATS. Therefore, PEF can be very accurately determined by compensating the transducer output based on the initial slope, which should be a useful technique for air flow transducer calibration.