• Journal of the Semiconductor & Display Technology
• /
• v.23 no.1
• /
• pp.12-18
• /
• 2024

The accelerated pace of climate crisis due to continuous industrialization and greenhouse gas emissions necessitates sustainable solutions that simultaneously address mitigation and adaptation to climate change. Naturebased Solutions (NbS) have gained prominence as viable approaches, with Green Infrastructure being a representative NbS. Green Infrastructure involves securing green spaces within urban areas, providing diverse climate adaptation functions such as removal of various air pollutants, carbon sequestration, and isolation. The proliferation of Green Infrastructure is influenced by the quantification of improvement effects related to various projects. To support decision-making by assessing the climate vulnerability of Green Infrastructure, the U.S. Department of Agriculture (USDA) has developed i-Tree Tools. This study proposes a comprehensive evaluation approach for climate change adaptation types by quantifying the climate adaptation performance of urban Green Infrastructure. Using i-Tree Canopy, the analysis focuses on five urban green spaces covering more than 30 hectares, considering the tree ratio relative to the total area. The evaluation encompasses aspects of thermal environment, aquatic environment, and atmospheric environment to assess the overall eco-friendliness in terms of climate change adaptation. The results indicate that an increase in the tree ratio correlates with improved eco-friendliness in terms of thermal, aquatic, and atmospheric environments. In particular, it is necessary to prioritize consideration of the water environment sector in order to realize climate change adaptive green infrastructure, such as increasing green space in urban areas, as it has been confirmed that four out of five target sites are specialized in improving the water environment.

• Journal of the Korean Society of Radiology
• /
• v.4 no.2
• /
• pp.21-25
• /
• 2010

Recently, various semiconductor compounds as radiation detection material have been researched for a diagnostic x-ray detector application. In this paper, we have fabricated the CdS detecton sensor that has good photosensitivity and high x-ray absorption efficiency among other semiconductor compounds, and evaluated the application feasibility by investigating the detection properties about energy range of diagnostic x-ray generator. We have fabricated the line voltage selector(LCV) for a signal acquisition and quantities of CdS sensor, and designed the voltage detection circuit and rectifying circuit. Also, we have used a relative relation algorithm according to x-ray exposure condition, and fabricated the interface board with DAC controller. Performance evaluation was investigated by data processing using ANOVA program from voltage profile characteristics according to resistive change obtained by a tube voltage, tube current, and exposure time that is a exposure condition of x-ray generator. From experimental results, an error rates were reduced according to increasing of a tube voltage and tube current, and a good properties of 6%(at 90 kVp) and 0.4%(at 320 mA) ere showed. and coefficient of determination was 0.98 with relative relation of 1:1. The error rate according to x-ray exposure time showed exponential reduction because of delayed response velocity of CdS material, and the error rate has 2.3% at 320 msec. Finally, the error rate according to x-ray dose is below 10%, and a high relative relation was showed with coefficient of determination of 0.9898.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.4
• /
• pp.56-64
• /
• 2021

Leakage due to deterioration and damage is one of the major causes of volume change by freezing and thawing, and it leads micro-cracking and surface scaling in concrete structures. The deterioration of damaged concrete accelerates with the chloride attack. Thus, in the detailed guidelines for facility performance evaluation (2020), the quality of cover concrete and the freeze-thaw (FT) repetition cycle were newly suggested for concrete durability assessment. The quality of cover concrete should be evaluated by the rebound hammer test and the FT repetition cycle should be also considered in the deterioration environmental assessment. This study suggested the application of fast dynamic based nonlinear ultrasound method to monitor initial micro-scale damage under freezing and thawing environment. Concrete specimens were fabricated with different water-cement ratios (40%, 60%) and air contents (1.5% and 3.0%). The compressive strength, rebound number, relative dynamic modulus, and nonlinear ultrasound were measured with different FT cycles. The scanning electron microscopy was also performed to investigate the micro-scale FT damage. As a result, both the rebound number and the relative dynamic modulus had difficulty to detect early damage but the proposed method showed a potential to detect initial micro-scale damage and predict the FT resistance performance of concrete.

• The Korean Journal of Franchise Management
• /
• v.13 no.3
• /
• pp.31-43
• /
• 2022

Purpose: Service quality is a topic of constant interest in marketing research and practitioners. Service quality is an important factor influencing performance even in the context of coffee shops, and research on service quality management strategies continues by coffee shop researchers and practitioners. The service quality of coffee shops is a source of competitive advantage and is an important factor in enhancing customer and business performance. This study aims to identify the effects of cognitive evaluation on emotional and behavioral responses using a cognitive-emotional-behavioral framework and SOR model in the coffee shop context. Cognitive evaluation (service quality) consists of tangibles, responsiveness, assurance, reliability, and empathy dimensions. Research design, data, and methodology: In the proposed model, positive and negative emotions and satisfaction mediate the relationship between service quality and money to spend and visit frequency. The data were collected from customers who visited a coffee shop within the last 1 month. The survey was conducted for about one month. Among a total of 300 distributed questionnaires 261 responses were used for data analysis. The data were analyzed using frequency analysis, measurement model analysis, and structural equation modeling analysis with SPSS 28.0 and SmartPLS 4.0. Results: Tangibles, responsiveness, assurance, and empathy had significant positive effects on positive emotion, while only reliability had a significant negative effect on negative emotion. Both positive and negative emotions had significant positive effects on customer satisfaction, but not on money to spend and visit frequency. Lastly, customer satisfaction had significant positive effects on money to spend and visit frequency. Conclusions: The study revealed the relative weight of cognitive factors on customer emotions and confirmed the validity of SOR model. The fact that tangibility is the most important factor in increasing positive emotions and reliability is the most important factor in reducing negative emotions provides a direction for emotional branding strategies using the service quality mix of coffee shops. This study confirmed the full mediating role of satisfaction between positive and negative emotions and consumer behaviors (money to spend and visit frequency). This infers that when a coffee shop increases customer satisfaction through customer emotion management, the customer's money to spend and visit frequency in the coffee shop increases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.361-375
• /
• 2015

An energy pile is one of the novel ground heat exchangers (GHEX's) that is a economical alternative to the conventional closed-loop vertical GHEX. The combined system of both a structural foundation and a GHEX contains a heat exchange pipe inside the pile foundation and allows a working fluid circulating through the pipe, inducing heat exchange with the ground formation. In this paper, a group of energy piles equipped with parallel U-type (5, 8 and 10 pairs) heat exchange pipes was constructed in a test-bed by fabricating in large-diameter cast-in-place concrete piles. In addition, a closed-loop vertical GHEX with 30m depth was constructed nearby to conduct in-situ thermal response tests (TRTs) and to compare with the thermal performance of the cast-in-place energy piles. A series of thermal performance tests was carried out with application of an artificial cooling and heating load to evaluate the heat exchange rate of energy piles. The applicability of cast-in-place energy piles was evaluated by comparing the relative heat exchange efficiency and heat exchange rate with preceding studies. Finally, it is concluded that the cast-in-place energy piles constructed in the test-bed demonstrate effective and stable thermal performance compared with the other types of GHEX.

• Journal of Radiation Protection and Research
• /
• v.42 no.2
• /
• pp.83-90
• /
• 2017

Background: Different cases exist in the measurement of thyroid radiobioassays owing to the individual characteristics of the subjects, especially the potential variation in the counting efficiency. An In situ Object Counting System (ISOCS) was developed to perform an efficiency calibration based on the Monte Carlo calculation, as an alternative to conventional calibration methods. The purpose of this study is to evaluate the applicability of ISOCS to thyroid radiobioassays by comparison with a conventional thyroid monitoring system. Materials and Methods: The efficiency calibration of a portable high-purity germanium (HPGe) detector was performed using ISOCS software. In contrast, the conventional efficiency calibration, which needed a radioactive material, was applied to a scintillator-based thyroid monitor. Four radioiodine samples that contained $^{125}I$ and $^{131}I$ in both aqueous solution and gel forms were measured to evaluate radioactivity in the thyroid. ANSI/HPS N13.30 performance criteria, which included the relative bias, relative precision, and root-mean-squared error, were applied to evaluate the performance of the measurement system. Results and Discussion: The portable HPGe detector could measure both radioiodines with ISOCS but the thyroid monitor could not measure $^{125}I$ because of the limited energy resolution of the NaI(Tl) scintillator. The $^{131}I$ results from both detectors agreed to within 5% with the certified results. Moreover, the $^{125}I$ results from the portable HPGe detector agreed to within 10% with the certified results. All measurement results complied with the ANSI/HPS N13.30 performance criteria. Conclusion: The results of the intercomparison program indicated the feasibility of applying ISOCS software to direct thyroid radiobioassays. The portable HPGe detector with ISOCS software can provide the convenience of efficiency calibration and higher energy resolution for identifying photopeaks, compared with a conventional thyroid monitor with a NaI(Tl) scintillator. The application of ISOCS software in a radiation emergency can improve the response in terms of internal contamination monitoring.

• Restorative Dentistry and Endodontics
• /
• v.38 no.1
• /
• pp.11-20
• /
• 2013

Objectives: In most retrospective studies, the clinical performance of restorations had not been considered in survival analysis. This study investigated the effect of including the clinically unacceptable cases according to modified United States Public Health Service (USPHS) criteria into the failed data on the survival analysis of direct restorations as to the longevity and prognostic variables. Materials and Methods: Nine hundred and sixty-seven direct restorations were evaluated. The data of 204 retreated restorations were collected from the records, and clinical performance of 763 restorations in function was evaluated according to modified USPHS criteria by two observers. The longevity and prognostic variables of the restorations were compared with a factor of involving clinically unacceptable cases into the failures using Kaplan-Meier survival analysis and Cox proportional hazard model. Results: The median survival times of amalgam, composite resin and glass ionomer were 11.8, 11.0 and 6.8 years, respectively. Glass ionomer showed significantly lower longevity than composite resin and amalgam. When clinically unacceptable restorations were included into the failure, the median survival times of them decreased to 8.9, 9.7 and 6.4 years, respectively. Conclusions: After considering the clinical performance, composite resin was the only material that showed a difference in the longevity (p < 0.05) and the significantly higher relative risk of student group than professor group disappeared in operator groups. Even in the design of retrospective study, clinical evaluation needs to be included.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.114-117
• /
• 1998

Failure to link business or operations strategy with the activities of operations is a critical problem in strategy implementation process. This problem comes from malfunction of a coordination and control mechanism to support the strategic direction by effective communication throughout the firm. A performance measurement and evaluation system (PMES) is thought as a core mechanism to monitor, direct. and induce desirable activities. We have developed a new strategic PMES (SPMES) that can effectively support the manufacturing strategy by utilizing customized performance measures. They are selected from a pool of four distinct but closely related sets of performance measures; financial, market, internal competency, and performance driver. In this paper, we briefly review the structure of the SPMES and explain the change process of PMES into SPMES in manufacturing business units. First we analyze the business environment and manufacturing strategy to identify short- and long-term issues facing the management. Next step is scrutinizing the objectives and activities of every function and process in the business unit. Using the information obtained, we can diagnose the gaps between currently effective PMES and desirable SPMES supporting the strategies. Once the problems in existing system are identified, we reconfigure the existing and new measures to establish a SPMES through a series of analyses, discussions and workshops. In organizing the selected measures in the new system, we use AHP method to reflect the relative importance of the measures in a specific business. Finally, modification or development of information system to support the SPMES wraps up the development process, and implementation begins. We explain the entire process using two cases to clarify the real meanings and the difficulties of PMES change process.

• Proceedings of the KOR-KST Conference
• /
• 2007.11a
• /
• pp.574-583
• /
• 2007

The quality of service on urban roadways have been evaluated mainly based on such quantitative measures as travel speed and delay. However, in addition to the quantitative aspects, drivers traveling on urban roadways are subject to be influenced by qualitative measures such as aesthetic aspects of the roadway and other drivers' violation of traffic laws. Based on this notion, this study attempts to identify roadway service quality indices, considering both qualitative and quantitative aspects and evaluate the quality of service using the modified Importance-Performance Analysis (IPA), a technique often applied in the field of marketing. The modified IPA is proposed in this study as a way to evaluate the service quality, reflecting the relative performance between study areas and performance indices. A case study is implemented over the Gangnam and Gangbuk areas in Seoul, resulting in identifying the items needed to be improved for each study area.

• Journal of Labour Economics
• /
• v.29 no.2
• /
• pp.29-66
• /
• 2006

This study investigates the structural change of wage determination within internal labor market that have occurred around the financial crisis in 1997 by using the personnel data(1996~2000) of a Korean large firm. We take the effect of performance-based pay system to apply on wage determination of workers using Mincerian earnings function estimation. After introducing the annual salary system in the firm, we did not find the fact that the wage effect of seniority decreases, but we found the wage effect of relative evaluation ratings increases. Then, this study identifies the importance of the reward strategy of firm in Korean internal labor market. Finally, we have concluded that although the firm acknowledged the positive effects of performance-based HRM practices, we have not obtained enough evidence on the transformation into such practices because the seniority-based HRM has been traditionally prevalent in the Korean internal labor market.