• 전기전자학회논문지
• /
• 제25권4호
• /
• pp.584-590
• /
• 2021

본 논문에서는 초음파 센서로 거리를 측정할 때 간섭에 의해 발생하는 유령 신호를 배제하고 올바른 신호를 인식하는 초음파 센서 간 신호 간섭 제거 방안을 제시한다. 제안하는 기법에서는 이전 거리 측정 값과 현재 거리 측정 값을 비교하여 거리의 변화가 한계값을 벗어나면 유령 신호로 인식하고 배제한다. 기존 기법에서는 한계값이 고정되어 있어서 초음파 센서나 대상 물체가 급격하게 움직일 경우 유령 신호를 제대로 배제하기 어렵지만, 제안하는 기법에서는 한계값을 고정하지 않고 초음파 센서나 대상 물체가 움직일 경우 상대 속도에 따라 한계값을 적응적으로 결정하는 알고리즘을 사용하여 정확도를 높인다. 초음파 센서로 물체까지의 거리를 측정할 때 간섭이 가장 잘 일어나는 동종의 초음파 센서를 다수 사용하여 간섭 신호를 발생시키는 실험을 진행하였고 제안하는 기법이 효과적으로 유령 신호를 배제하는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2608-2610
• /
• 2000

In this paper, an observer-based adaptive controller is proposed to control the longitudinal motion of vehicles. The standard gradient method will be used to estimate the vehicle parameters, mass, time constant, etc. The nonlinear model between the driving force and the vehicle acceleration will be chosen to design the state observer for the vehicle velocity and acceleration. It will be shown that the proposed observer is exponentially stable, and that the adaptive controller proposed in this paper is stable. It will be proved that the errors of the relative distance, velocity and acceleration converge to zero asymptotically fast, and that the overall system is also asymptotically stable. The simulation results are presented to investigate the effectiveness of the proposed method.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권10호
• /
• pp.693-698
• /
• 1999

Vacuum interrupters have a special asymmetric electrode structure to generate an magnetic field and consequently to increase the interrupting ability. Accordingly 2-dimensional analysis has a large analysis error because radial flux can not be considered. In this paper, in order to analyse the electric field distribution of a vacuum interrupter with arc shield more accurately, 3-dimensional finite element method(FEM) is used. The induced electric potentials of floating shield was increased with the gap distance, which is because the relative position of shield is closer to the fixed contact so that the capacitance distribution inside interrupter is varied. The calculated results also show that the induced potential of shield causes electric field distortion so that the maximum value of electric field in a vacuum interrupter with arc shield is higher than that without one.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권4호
• /
• pp.173-180
• /
• 2006

A key component of autonomous navigation of intelligent home robot is localization and map building with recognized features from the environment. To validate this, accurate measurement of relative location between robot and features is essential. In this paper, we proposed relative localization algorithm based on 3D reconstruction of scale invariant features of two images which are captured from two parallel cameras. We captured two images from parallel cameras which are attached in front of robot and detect scale invariant features in each image using SIFT(scale invariant feature transform). Then, we performed matching for the two image's feature points and got the relative location using 3D reconstruction for the matched points. Stereo camera needs high precision of two camera's extrinsic and matching pixels in two camera image. Because we used two cameras which are different from stereo camera and scale invariant feature point and it's easy to setup the extrinsic parameter. Furthermore, 3D reconstruction does not need any other sensor. And the results can be simultaneously used by obstacle avoidance, map building and localization. We set 20cm the distance between two camera and capture the 3frames per second. The experimental results show :t6cm maximum error in the range of less than 2m and ${\pm}15cm$ maximum error in the range of between 2m and 4m.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.173-177
• /
• 2002

This paper describes the algorithm for WMR (Wheeled Mobile Robot) to follow the preceding object using stereo vision. The center point of object existing in each image is calculate. From the distance and variation of two center points, we calculates the distance from WMR to preceding object and the relative velocity of WMR. And we use the Lyapunov theory to design controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.339-341
• /
• 2006

This paper proposes a method of container position measurement using automatic landing system that is estimated by a laser range finder. In the most of container position measurement methods, CCD cameras or laser scanners have been used to get the source data. However those sensors are not only weak for disturbances, for examples, the light, fog, and rain, but also the system cost is high. When the spreader arrives the goal position, it is still swung by inertia or by wind effect. In this paper, the spreader swung data have been used to find the container position. The laser range finder is equipped in the front side of spreader. It can measure distance and relative position between spreader and container. This laser range finder can be rotated as desired by a motor. And a tilt sensor is equipped on the spreader to measure spreader sway. We estimate the relative position information between the spreader and a container using the laser range finder and tilt sensor through the geometrical analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권2호
• /
• pp.574-592
• /
• 2016

Range-free localization algorithm computes a normal node's position by estimating the distance to anchors which know their actual position. In recent years, reliable anchor selection research has been gained a lot of attention because this approach improves localization accuracy by selecting the only subset of anchors called reliable anchor. The distance estimation accuracy and the geometric shape formed by anchors are the two important factors which need to be considered when selecting the reliable anchors. In this paper, we study the relationship between a relative position of three anchors and localization error. From this study, under ideal condition, which is with zero localization error, we find two conditions for anchor selection, thereby proposing a novel anchor selection algorithm that selects three anchors matched most closely to the two conditions, and the validities of the conditions are proved using two theorems. By further employing the conditions, we finally propose a novel range-free localization algorithm. Simulation results show that the proposed algorithm shows considerably improved performance as compared to other existing works.

• 한국전기전자재료학회논문지
• /
• 제30권4호
• /
• pp.241-245
• /
• 2017

This paper proposes a private display that can adjust viewing angles by using an electric-field-driven (EFD) LC Lens. The EFD LC Lens design and simulation were analyzed by using the Extended Jones Matrix Method. The conventional method for attaching a private film to the display was difficult. In order to solve this problem, in this study, by using the EFD LC Lens, we devised a method that can view images more conveniently. We analyzed the luminance and illumination of the optical viewing distance by using the Extended Jones Matrix Method. We also measured the intensity of the viewing angles. The simulation attached the EFD LC Lens to the 14" Full HD RGB stripe wide panel. We calculated the relative luminance distribution and the luminance distribution on the viewing angle of the image at the optimum viewing distance of 60 cm, using the EFD LC Lens and the lenticular lens. The proposed method could be used to design private displays that can adjust the viewing angle of the EFD LC Lens.

• 전기학회논문지
• /
• 제66권7호
• /
• pp.1072-1077
• /
• 2017

Mean-reverting analysis refers to a way of estimating the underlining tendency after new data has evoked the variation in the equilibrium state. In this paper, we propose a new method to interpret the specular portraits of Premature Ventricular Contraction(PVC) arrhythmia by applying K-means unsupervised learning algorithm on electrocardiogram(ECG) data. Aiming at this purpose, we applied a mean-reverting model to analyse Heart Rate Variability(HRV) in terms of the modified poincare plot by considering PVC rhythm as the component of disrupting the homeostasis state. Based on our experimental tests on MIT-BIH ECG database, we can find the fact that the specular patterns portraited by K-means clustering on mean-reverting HRV data can be more clearly visible and the Euclidean metric can be used to identify the discrepancy between the normal sinus rhythm and PVC beats by the relative distance among cluster-centroids.

• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1041-1048
• /
• 2004

Chemical mechanical polishing (CMP) process was studied in terms of tribology in this paper. CMP performed by the down force and the relative motion of pad and wafer with slurry is typically tribological system composed of friction, wear and lubrication. The piezoelectric quartz sensor for friction force measurement was installed and the friction force was detected during CMP process. Various friction signals were attained and analyzed with the kind of pad, abrasive and abrasive concentration. As a result of experiment, the lubrication regime is classified with ηv/p(η, v and p; the viscosity, relative velocity and pressure). The characteristics of friction and material removal mechanism is also different as a function of the kind of abrasive and the abrasive concentration in slurry. Especially, the material removal per unit distance is directly proportional to the friction force and the non~uniformity has relation to the coefficient of friction.