• Journal of the Korean Data and Information Science Society
• /
• v.12 no.1
• /
• pp.135-142
• /
• 2001

A multivariate statistic based on interdirection is proposed for detecting dependence among many vectors. The asymptotic distribution of the proposed statistic is derived under the null hypothesis of independence. Also we find the asymptotic distribution under the alternatives contiguous to the null hypothesis, which is needed for later use of computing relative efficiencies.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2003.05a
• /
• pp.391-392
• /
• 2003

There were many studies on the dependence of clearance rate on temperature and the body size of bivalves (Winter, 1973; Bayne et al., 1976; Yukihira et al., 1998), Most of these studies dealt with relatively large species, especially commercially important species. Studies with smaller but ecologically important species were relative rare(Werner and Hollibaugh, 1993). (omitted)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.42-45
• /
• 2002

General wheel mark in mono-crystalline silicon wafer finding is able to be expected because it depends on radius ratio and angular velocity ratio of wafer and wheel. The pattern is predominantly determined by the contour of abrasive grits resulting from a relative motion. Although such a wheel mark is made uniform pattern if the process parameters are fixed, sub-surface defect is expected to be distributed non-uniformly because of characteristic of mono-crystalline silicon wafer that has diamond cubic crystal. Consequently it is considered that this phenomenon affects the following process. This paper focused on kinematic analysis of wafer grinding process and simulation program was developed to verify the effect of process variables on wheel mark. And finally, we were able to predict sub-surface defect distribution that considered characteristic of mono-crystalline silicon wafer

• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.77-80
• /
• 2005

A series of proton conductive composite membranes based on poly(vinyl alcohol) and phosphosilicate gels powders were successfully prepared. The proton conductivity of these composite was attributed to the phosphosilicate gel, which derived from tetraethoxysilane and phosphoric acid by sol-gel process at a molar ratio of P/Si = 1.5. The proton conductivity increased with increasing both the content of phosphosilicate gel and relative humidity. Temperature dependence of conductivity showed a Vogel-Tamman-Fulcher type behavior, indicating that proton was transferred through a liquidlike phase formed in micropores of phosphosilicate gel. The high conductivity of 0.065 S/cm with a membrane containing 60 wt$\%$ of the gel was obtained at $60^{\circ}C$ at $90\%$ relative humidity.

• Knowledge Management Research
• /
• v.8 no.1
• /
• pp.29-47
• /
• 2007

Threat is one special type of communication whereby one conveys opinion, knowledge, or attitude to another with an intention to influence and modify the latter's opinion or behavior. This research aims at identifying the antecedents and the effectiveness of threats applied in the process of purchasing decision-making. The research model integrates constructs derived from the literature of diverse discipline. The framework suggested explains the relative effects of threats, is tested empirically to verify the impacts on the influenced target's opinions and behaviors in buying centers. Data are collected from CAPM's members in Taiwan, and 208 respondents served as targets in the interpersonal relationships. LISREL findings indicate that threats are effective in winning a target's compliance. Additionally, influencing source's characteristics affect the choice of threats more strongly than target characteristics do. The relative ability of dependence on the source to cause manifest influence is even more significant than that of threats. Overall, the results of this study appear consistent with behavioral theories and research.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.122-125
• /
• 2002

The optimal guidance has advantages of accuracy and economic energy consumption but it is difficult to implement due to its dependence on the target information such as the relative range, the relative velocity and the acceleration of target. This paper uses optimal guidance and sliding-mode guidance to obtain a new guidance method. The suggested method shows robustness against target maneuvers, good dynamic performance, energy saving of missile and terminal accuracy. Its effectiveness is demonstrated by the simulation results.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1237-1243
• /
• 2014

The aim of the present paper is to analyze the friction and mass flow in a rough microchannel using Lattice Boltzmann Method (LBM). The LBM is a kinetic method based on the particle distribution function, so it can be fruitfully used to study the flow dependence on Knudsen number including slip velocity, pressure drop in rough microchannel. The surface roughness elements are taken to be considered as a series of circular shaped riblets throughout the channel with relative roughness height up to a maximum 10% of the channel height. The friction coefficients in terms of Poiseuille number (Pn), mass flow rate and the flow behaviors have been discussed in order to study the effect of surface roughness in the slip flow regime at Knudsen number (Kn), ranging from 0.01 to 0.10. It is seen that the friction factor and the flow behaviors in a rough microchannel strongly depend on the rarefaction effect and the relative roughness height. The friction factor in a rough microchannel is higher than that in smooth channel but the mass flow rate is lower than that of smooth channel. Moreover, it is seen that the friction factor increased with relative roughness height but decreased with increasing the Kundsen number (Kn) whereas the mass flow rate is decreased with increasing both of surface roughness height and Knudsen number.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6875-6881
• /
• 2013

Background: Studies evaluating smoking cessation treatment outcomes in cancer patients are scarce, despite smoking cessation importance in cancer care. We sought to add to the literature by evaluating smoking cessation in a challenging group of cancer patients (medium-to-heavy smokers) visiting an out-patient smoking cessation clinic (SCC) in a cancer center in Amman, Jordan. Materials and Methods: Patients smoking >9 cigarettes per day (CPD) and referred to the SCC between June 2009 and May 2012 were studied. Clinic records were reviewed to measure demographic and baseline clinical characteristics, and longitudinal (3-, 6- and 12- month) follow-up by phone/clinic visit was conducted. At each follow-up, patients were asked if they experienced medication side-effects, if they had returned to smoking, and reasons for failing to abstain. Descriptive and multivariable logistic regression analyses were performed. Results: A total of 201 smokers were included in the analysis. The 3-month abstinence was 23.4% and significantly associated with older age, being married, and presenting with lower (${\leq}10ppm$) baseline carbon monoxide (CO) levels. On a multivariable level, lower CO levels, a higher income (relative to the lowest income group), being older, and reporting severe dependence (relative to dependence reported as 'somewhat' or 'not') were significant predictors of higher odds of abstinence at three months. Reasons for failing to quit included not being able to handle withdrawal and seeing no value in quitting. Long-term ARs did not reach 7%. Conclusions: In a sample of Jordanian smokers (>9CPD) with cancer and receiving smoking cessation treatment, ARs were low and further declined with time. Results underscore the need for more aggressive patient management and rigorous follow-up during and after smoking cessation treatment, particularly when this takes place in challenging settings. Observed reasons for failure to abstain should be used to tailor counseling practices.

• Korean Journal of Materials Research
• /
• v.24 no.5
• /
• pp.236-242
• /
• 2014

Fabrication of reaction-bonded $Al_2O_3$ (RBAO) ceramics using Al-Zn-Mg alloy powder was studied in order to improve traditional RBAO ceramic processing using Al powder. The influence on reaction-bonding and microstructure, as well as on physical and mechanical properties, of the particulate characteristics of the $Al_2O_3$-Al alloy powder mixtures after milling, was revealed. Variation of the particulate characteristics of this $Al_2O_3$-Al alloy powder mixture with milling time was reported previously. To start, the $Al_2O_3$-Al alloy powder mixture was milled, reaction-bonded, post-sintered, and characterized. During reaction-bonding of the $Al_2O_3$-Al alloy powder mixture compacts, oxidation of the Al alloy took place in two stages, that is, there was solid- and liquid-state oxidation of the Al alloy. The solid-state oxidation exhibited strong dependence on the density of surface defects on the Al-alloy particles formed during milling. Higher milling efficiency resulted in less participation of the Al alloy in reaction-bonding. This was because of its consumption by chemical reactions during milling, and subsequent powder handling, and could be rather harmful in the case of over-milling. In contrast to very little dependence of oxidation of the Al alloy on its particle size after milling, the relative density, microstructure, and flexural strength were strongly dependent on particle size after milling (i.e., on milling efficiency). The relative density and 4-point flexural strength of the RBAO ceramics in this study were ~98% and ~365 MPa, respectively, after post-sintering at $1,600^{\circ}C$.

• Environmental Analysis Health and Toxicology
• /
• v.14 no.3
• /
• pp.113-120
• /
• 1999

Fluorination of drinking water has been used world widely to reduce the incidence of caries. Recently, contradictory results on the cytotoxicity of fluoride compounds are reported. In addition, there are attempts to use fluorosilicate for fluorination of drinking water in Korea, therefore, we tried to analyze the cytotoxicity of fluoride compounds on oral epidermoid carcinoma (KB and A253) and osteosarcoma (HOS and MG-63) cells in this study. We treated cells with 0, 10, 50 and 250 ppm of fluorosilicic acid (domestic or from Fluka, F$\_$6/H$_2$Si), sodium fluorosilicate (F$\_$6/Na$_2$Si), sodium fluoroacetate (FCH$_2$CO$_2$Na), sodium fluoride (NaF) or potassium fluoride(KF) and measured the relative cell survival by MTT assay. At the concentration of < 10ppm, no significant cytotoxicity was observed. At 50 ppm, each cells revealed different response to fluoride treatment. Among cells used in this study, MG-63 was the most resistant to fluoride treatment. Comparable toxicity data from domestic and imported fluorosilicic acids were obtained. When we compared the relative cytotoxicity of fluoride compounds against their fluoride contents, the differences in relative cell survival were smaller. Most of cells showed < 20% of survival at 250 ppm. In order to analyze the pH dependence of the cytotoxicity of fluorosilicates, the pH of cell culture media containing fluorosilicate was adjusted to 7.4 or 6.5 and the relative cytotoxicity was measured. At lower pH, about 10% higher cytotoxicity was obtained. Thus, our data suggested that the toxicity of domestic fluorosilicic acid was similar to that of fluorosilicic acid from Fluka, and the cytotoxicity of fluoride compounds was dependent on the relative content of fluoride and pH.