• The Journal of Korean Physical Therapy
• /
• 제23권2호
• /
• pp.23-29
• /
• 2011

Purpose: The purpose of this study was to determine whether there is a relationship between strength balance and joint position sense related to the ankle joint in healthy women. Methods: Twenty-six healthy women were recruited. Isokinetic strength and joint position sense (JPS) were measured using a Biodex System 4 pro Dynamometer and a Biodex Advantage Software Package. Prior to measuring the JPS and isokinetic strength, the dominant foot was determined according to the Waterloo Footedness Questionnaire. After the JPS test, isokinetic strength was evaluated in velocity $60^{\circ}s$, including practice trial ($90^{\circ}s$). Using the measured isokinetic strength, a Strength Balance Index (SBI) was calculated. Results: Relative to the SBI, the degree of imbalance was varied; but there were imbalances. For each starting position, JPS error showed no significant differences (p>0.05). The relationship between SBI and JPS was found during the inversion to eversion process, eversion to inversion, and dorsi flexion to plantar flexion. Conclusion: There are moderate to mild relationships between JPS and SBI during ankle movement. It is suggested that to prevent ankle injuries, strength balance should be considered along with the other potential factors including anatomical alignment, proprioception, and soft tissues problems.

• 한국소음진동공학회논문집
• /
• 제11권9호
• /
• pp.454-461
• /
• 2001

Acoustic noise and vibration of a BLDC motor is a coupled phenomenon between mechanical characteristics and electromagnetic origins through the motor air-gap. When a relative misalignment of rotor in the air-gap center exists on the assemblage, it is considered to influence the motor system characteristics. In this paper, the back electro motive force(BEMF) is analyzed by Finite Element Method(FEM) and verified by experiments for the SPM and IPM type motors. For magnetic field analysis, a FEM is used to account for the magnetic saturation. Using these results, the FEM is made to determine the appropriate electromagnetic field analysis in BLDC motors with rotor eccentricity ratio. A radial magnetic imbalance force of BLDC motor with rotor eccentricity is analyzed. Results demonstrate that the imbalance force is increased according to the degree of misalignment. An IPM motor, mostly chosen to realize high-speed operation, shows a worse effect on magnetic unbalanced forces and dynamic responses compared with SPM motor due to magnetic saturation when the rotor eccentricity exists.

• 한국소음진동공학회논문집
• /
• 제17권1호
• /
• pp.88-94
• /
• 2007

Structures with additional frictional damping system have strong nonlinearity that the dynamic behavior is highly affected by the relative magnitude between frictional force and excitation load. In this study, normalized response spectra of the structures with non-dimensional friction force are obtained through nonlinear time history analyses of the mass-normalized single degree of freedom systems using 20 ground motion data recorded on rock site. The variation of the control performance of frictional damping system is investigated in terms of the dynamic load and the structural natural period, of which effects were not considered in the previous studies. Least square curve fitting equations are presented for describing those normalized response spectrum and optimal non-dimensional friction forces are obtained for controlling the peak displacement and absolute acceleration of the structure based on the derivative of the curve-fitted design spectrum.

• 원예과학기술지
• /
• 제35권1호
• /
• pp.59-68
• /
• 2017

Caffeoyl shikimate esterase (CSE) is a key enzyme in lignin synthesis in Arabidopsis thaliana. To determine the role of CSE in lignification of the endocarp in peach (Prunus persica L.) fruit, we cloned and characterized the P. persica CSE homolog, which we designated PpCSE. The 954 - bp PpCSE gene encoded a 317 - amino acid polypeptide. PpCSE expression patterns in the mesocarp and endocarp changed during peach fruit development. There was no significant difference between the expression levels of PpCSE in the mesocarp and endocarp at 39 and 44 days after full bloom (DAFB), but the expression level of PpCSE in the endocarp at 50 and 55 DAFB was 80.73 and 72.75 times higher, respectively, than that in the mesocarp. During peach fruit development, PpCSE expression in the endocarp increased rapidly; the relative PpCSE expression level at 50 DAFB was 122.70 times higher than that at 39 DAFB. At the protein level, CSE was detected in the peach fruit endocarp at 50 and 55 DAFB. Our study suggests that PpCSE expression during peach fruit development is closely related to the degree of endocarp lignification.

• 한국통신학회논문지
• /
• 제29권2C호
• /
• pp.272-282
• /
• 2004

본 논문에서는 정규화 혼합 norm을 이용한 다중 채널 영상 복원 기법을 제안한다. 채널 영상 간 및 채널 영상내의 결정론적 정보를 이용한 다중 채널 영상 복원에 관한 문제를 고려한다. 제안 방식에서는 각 채널 영상에 대해 LMS (Least Mean Square) 및 LMF (Least Mean Fourth) 및 완화 함수를 결합시킨 부가 함수가 제안된다. 더불어, LMS 및 LMF의 상대적 기여도를 제한하기 위한 혼합 norm 매개 변수 및 완화 함수의 중요성을 제어하는 정규화 매개 변수는 반복 영상으로부터 예측된 각 채널의 노이즈 분포에 의해 결정되어 진다. 제안된 방식은 각 채널 영상의 첨부 노이즈 형태에 대한 사전 정보 없이 복원 과정이 가능하다는 점과 두 매개 변수를 반복 과정에서 부분적으로 복원된 영상으로부터 조절할 수 있는 특성을 갖고 있다.

• 대한전기학회논문지
• /
• 제37권3호
• /
• pp.171-179
• /
• 1988

본 논문은 MRAC방식을 이용하여 비행체 조종장치의 제어기 설께에 관하여 다루었다. 적응제어 시스템의 구성은 NARENDRA와 VALAVANI가 제안한 구조를 토대로 하여 프랜트의 상대차수가 $n^{*}=2$인 경우에 대하여 고찰하였다. 비행체 조종장치는 단일 입.출력을 갖는 제어시스템으로 근사화하였고, 제어입력은 기준모델과 프랜트의 입.출력관계로부터 얻는다. 설계된 제어시스템의 타당성을 검토하기 위하여 프랜트가 애널로그 모델인 경우롸 비행자세를 나타내줄 수 있는 비행운동테이블을 포함하는 각각의 경우에 대하여 시뮬레이션하였고, 그 결과 검토하였다.

• 산업경영시스템학회지
• /
• 제6권8호
• /
• pp.13-19
• /
• 1983

In this paper an attempt is tried to answer the following questions : What does ergonomics have to do with work satisfaction\ulcorner Is there more satisfaction when ergonomics have applied in the design of work\ulcorner Is ergonomics important for work satisfaction\ulcorner This paper is started by defining the concept of satisfaction and ergonomics which is still at a comparatively early stage of development, and the effect of this in practice is that the majority of ergonomics assignments involve research. And then there discussions difficult theories of motivation and satisfaction such as Maslow' theory and Horzberg's theory. And in this paper I'll try to formulate the logical consequences of those theories for the relation between ergonomics and satisfaction. Finally I'll conclude with some ideas about the significance of ergonomics satisfaction. The level of satisfaction experienced with one's work is a complete function of the degree to which different values connected with work and with its concomitant results are attained, the opportunities perceived for the attainment of these values, the relative advantages and disadvantages of the work situation compared with that of other people, and personality and cultural determinants. As for ergonomics, the ergonomist's comprehension will need in future to encompass more of the emotional, attitudinal and motivational facts of working people. Ergonomically - designed work will not produce high degrees of satisfaction, but absence of ergonomics in design will be connected with some dissatisfaction. So this paper suggest s that ergonomics has some significance for work satisfaction and that social Psychological efforts to enhance work satisfaction cannot easily succeed without taking into account human-factors principles.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권2호
• /
• pp.107-118
• /
• 2005

An experimental investigation was made to study two-phase flow distribution in a T-type distributor of slit fin-and-tube heat exchanger using R-22. Experiments were carried out under the conditions of saturation temperature of $5^{\circ}C$ and mass flow rate varying from 0.6 to 1.2kg/min. The inlet air has dry bulb temperature of $27^{\circ}C$, relative humidity of 50% and air velocity varying from 0.63 to 1.71m/s. A comparison was made between the predictions from the previously proposed tube-by-tube method and the present experimental data for the heat transfer rate of evaporator. Results show that $82.5\%$ increase of air velocity is needed for T-type distributor with four outlet branches than that of two outlet branches under the superheat of $5^{\circ}C$, which resulted in increasing of air-side pressure drop of $130\%$ for the former as compared to the latter.

• Nuclear Engineering and Technology
• /
• 제43권4호
• /
• pp.361-374
• /
• 2011

Two types of numerical modeling techniques were considered for the dynamic response of a structure subjected to a ground acceleration. One technique is based on the equation of motion relative to ground motion, and the other is based on the equation of absolute motion of the structure and the ground. The analytic background of the former is well established while the latter has not yet been extensively verified. The latter is called a large mass method, which allocates an appropriate large mass to the ground so that it causes the ground to move according to a given acceleration time history. In this paper, through the use of a single degree-of-freedom spring-mass system, the equations of motion of the two techniques were analyzed and useful theorems are provided on the large mass method. Using simple examples, the numerical results of the two modeling techniques were compared with analytic solutions. It is shown that the theorems provide a clear insight on the large mass method.

• 디지털산업정보학회논문지
• /
• 제7권3호
• /
• pp.37-42
• /
• 2011

Nowadays software developers are moving from conventional software process technologies to the object-oriented paradigm. To develope the object-oriented softwares efficiently, various software metrics have been suggested. Coupling refers to the degree of independence between components of the system. It has long been well known that good software practice calls for minimizing coupling interaction. Many researches have been studied coupling metrics of the object- oriented systems. We review Chidamber and Kemerer's work & Li's work. In this paper, we study the coupling of the overall structures of object-oriented systems by analyzing the class diagram of UML. We propose four coupling metrics for object-oriented softwares. First, we use an established coupling metric for object- oriented systems as a basic coupling metric. Then we modify the basic coupling metric by including indirect coupling between classes, We also suggest two relative coupling metrics to measure coupling between subsystems. We investigate the theoretical soundness of the proposed metrics by the axioms of Briand et al. Finally, we apply the presented metrics to a practical case study. This coupling metric will be helpful to the software developers for their designing tasks by evaluating the coupling metric of the structures of object-oriented system and redesigning tasks of the system.