• 한국물환경학회지
• /
• 제37권3호
• /
• pp.168-174
• /
• 2021

Mixing is a very important unit in water treatment process. A mechanical stirring method is generally used for mixing, but recently, the use of pressurized water mixing method (pump diffusion flash mixer) has gained interest because it is more advantageous in terms of mixing time, noise, energy consumption, and maintenance. The following conclusions were obtained from the study of pressurized water mixing method by Computational Fluid Dynamics. Firstly, the mixing degree in the pipe increased as the density of water increased. Secondly, even if the relative velocity between flow rate in the pipe and the pressurized water was constant, the mixing degree decreased as the flow velocity in the pipe increased. Thirdly, the stronger the injection energy the higher the mixing degree. It was also found that the mixing degree was greatly affected by the injection velocity as compared to the injection flow amount. Finally, the required energy to achieve 95% mixing degree at the distance of 10 times diameter in big pipes of 500 mm to 3000 mm was 0.3 to 4.5 kJ. The result of this study could be used in the process design of injection with water purification chemicals, such as, ozone, chlorine, and coagulant.

• 한국의류학회지
• /
• 제12권1호
• /
• pp.69-80
• /
• 1988

In this study, we have compared the relative importance of various washing condition affecting on soil release for P/C blended fabrics. P/C blended fabrics were soiled by the pad-dry method with aqueous and oily soil. The washing procedures of soiled samples were performed by Atlas Launder-Ometer with 27 wash conditions which are combinations of wash temp. wash time and detergent cone. The degree of soil-release was evaluated with CIE 1976 Lab color difference before and after washing. Multiple regression analysis was used to evaluate the optimum wash conditions and the relative importance of the factors providing maximum soilremoval.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.827-832
• /
• 2003

This study presented the reinforcing effect of sands by using newly devised 3D Tirecell. Plate loading tests for sand were conducted for different relative density and number of reinforced layers. From the tests, the ultimate bearing capacity of reinforced sand increased with increasing relative densities. The effect of reinforced layers with 0.4B interval is limited to 2 layers and further reinforcing effects can not be obtained beyond 3 layers. Especially the bearing capacity increased remarkably at 1 layer of Tirecell reinforcement and the degree of increase was small for 1 layer to 2 layers increase of reinforcement. Test results show that the reinforcing effect of Tirecell is prominent compared with commercial geocell in the literature.

• 한국통신학회논문지
• /
• 제10권5호
• /
• pp.258-265
• /
• 1985

이 論文은 SISO 離散時間 基準모델 適應制御시스템에 대한 設計問題를 다루었다. 基準모델과 未知시스템의 入·出力端에 狀態變數필터를 도입하므로서, 可用信號들로 구성된 아주 간단한 適應시스템을 구성할 수 있다. 未知시스템의 相對次數가 1 또는 2 이상인 경우의 設計法은 多數 발표되었으나, 構造가 매우 복잡하거나 設計理論이 일반화하지 못하였다. 본 論文에서는 相對次數가 2이상인 경우에 간단한 線型필터를 도입하므로서 適應構造를 간단히 구성할 수 있음을 證明하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2270-2273
• /
• 2003

Fuzzy logic control has been widely implemented in air conditioning and ventilation systems which has uncertainty or high robust system. Since the dynamic behaviors of the systems contain complexity and uncertainty in its parameters , several fuzzy logic controllers had been implemented to control room temperature in the field of air conditioning system. In this paper, the fuzzy logic control has been developed to control room temperature and humidity in the precision air conditioning systems. The nonlinear mathematical model was formulated using energy and continuity equations. MATLAB was used to simulate the fuzzy logic control of the multi-variable air conditioning systems. The simulation results show that fuzzy logic controller can reduce the steady-state errors of the room temperature and relative humidity in multivariable air conditioning systems. The offset are less than 0.5 degree Celsius and 3 percent in relative humidity respectively under random step disturbance in heating load and moisture load respectively

• 한국영어학회지:영어학
• /
• 제1권1호
• /
• pp.1-17
• /
• 2001

The displacement of the prepositional object from PP (DPO) was strictly prohibited in Old English (OE). No matter how such a prohibition is theoretically analyzed, it seems clear that OE had some sort of constraint against DPO. In this paper, I address the issue of what motivated the constraint by explaining what made DPO so difficult in OE. In particular, on the basis of the discussion about relative obliqueness among OE NP arguments, I propose that what was behind the constraint is both a high degree of obliqueness of OE prepositional arguments, which was rigidly marked and represented by the preposition as an obliqueness marker, and the representation and maintenance of relative obliqueness among OE NP arguments.

• 소음진동
• /
• 제10권3호
• /
• pp.401-409
• /
• 2000

Vibration of a BLDC motor is a coupled phenomenon between mechanical characteristics and magnetic origins through the motor air-gap. When a relative misalignment of rotor in the air-gap center exists on the assemblage it is considered to influence the motor system characteristics, depending on the degree of misalignment. The rotor-motor system used in a washing machine is modeled using FE-TM and a magnetic force of BLDC motor with radial rotor eccentricity is analyzed. And the transient whirl responses of a rotor system with relative misalignment in the motor air-gap are investigated considering mechanical origins and magnetic effects. Results show that rotor misalignment in the air-gap affect the vibration of the rotor-motor system.

• 한국조경학회지
• /
• 제25권3호
• /
• pp.177-185
• /
• 1997

Hibiscus syriacus were surveyed to study the growing temperature, relative humidity and growing responses shown at different elevations of Kangwon Province, and results of the assessment are summarized as follows 1. Growing responses as represented by leaf length, leaf width, shoot length, number of flowers and flowering duration, were decreased as the elevation increased, while the degree of defoliation was increased. 2. The important factor determining the growing responses to the elevation was the maximum and minimum temperatures, particularly those of July, August, and September. 3. The aphid occurrence on Hibiscus syriacus decreased as the elevation increased. Leading factor determining the population was relative humidity which increased as the elevation increased.

• 한국지능시스템학회논문지
• /
• 제7권2호
• /
• pp.66-69
• /
• 1997

본 논문에서는 퍼지 유사 척도가 제시된다. 제시된 퍼지 유사 척도는 유사도를 결정하기 위해서 유크라디안 거리와 함께 데이터와 클러스터 대표값들 사이의 상대적 거리를 고려한다. 클러스터의 경계선은 경쟁이 심한 곳에서는 축소되며 경쟁이 심하지 않은 곳에서는 확장된다. 본 논문의 결과는 상대적 거리를 유사 척도로 사용하는 가능성을 보인다.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권8호
• /
• pp.399-404
• /
• 2000

This paper presents new algorithms equivalencing large-scale power systems. Generators are identified to the coherent groups according to the relation factors, which represent the relative coupling degree between the generators. While the groups are identified, participation numbers, which are the measure of the relative participation of the generators in the group, are obtained. All generators and controllers in the group are weighted by participation numbers and aggregated to construct a dynamic equivalent. The proposed algorithms are applied to a 272-machine Korea Electric Power Corporation (KEPCO)'s system. The enclosed results indicate the accuracy and usefulness of the algorithms.