• 한국안전학회지
• /
• 제7권4호
• /
• pp.85-94
• /
• 1992

This paper, discribes analysis of theree - dimensional extrusion with the use of dual stream functions, By this method admissible velocity fields for the extrusion of three- dimensional flow was newly derived kinematically. For square section the extrusion pressure was calculated by numerical solution program which was based on the upper bound analysis. The relationship between relative extrusion pressure and reduction of area, relative die length and constant friction factors were successfully calculated which was newly developed in this study. The results could be applied to design extrusion die.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.51-58
• /
• 2002

The relative site amplification factors in southern Korea were determined from coda waves using coda normalization method. The seismograms of 15 events at 79 stations were used in this study. Seismogram envelopes were obtained by the Hilbert transform of bandpass-filtered velocity seismograms with frequency bands at 1-2Hz, 2-4Hz, 4-8Hz, 8-l6Hz and 16-32Hz. The envelopes were stabilized by application of moving-average scheme with time window of 1 second. The relative amplitudes of seismogram envelope were computed by dividing the amplitude of seismogram envelope at one site by the amplitude of seismogram envelope at reference site. The relative site amplification factors were obtained by taking averages of the relative amplitude. Values of relative site amplification factors in southern Korea are generally low in western area and high in eastern area.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.236-241
• /
• 2004

In this paper, the dual stage interaction between the coarse actuator and the fine actuator of an optical disk drive and the control method to enhance the track pull-in performance are discussed. First, the interaction analyses for the dual stage, and the experiments to find the each actuator dynamics are studied. From the experiments results, some physical parameters was derived, then, some simulations are performed to find the residual vibration effect of the fine actuator during seek motion. Second, the fine actuator control method to reduce the relative velocity, which is a key factor in track pull-in performance, between the target track and beam spot is proposed. From simulations, we show that fine actuator control which has same frequency and same phase of the disturbance is effective to reduce the relative velocity, hence, the control method is good approach in the track pull-in enhancement. Finally, the some comments are discussed briefly.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.52-56
• /
• 1992

A kinematically admissible velocity field for closed-die forging of spur gear is proposed. The velocity field is divided into three regions of deformation. In the analysis, the involute curve is approximated to be straight line and the upper-bound method is used to calculate energy dissipation rate. A constant frictional factor has been assumed on the contacting surfaces. The effects of root diameter relative pressure is independent of root diameter for the same number of teeth, but increases with the number of teeth on a given root diameter. In the presence of friction, relative forging pressure increases with increasing root diameter at the start of forging, but decreases with increasing root diameter in the processing of forging.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.235-242
• /
• 2003

The solids and the fluids in porous media have a relative velocity to each other. Due to physically and chemically different material properties and their relative velocity, the behavior of saturated porous media is extremely complicated. Thus, in order to describe and clarify the deformation behavior of saturated porous media, constitutive models for deformation of porous media coupling several effects such as flow of the fluids or thermodynanical change need to be developed in frame of Arbitrary Lagrangian Eulerian (ALE) description. The aim of ALE formulations is to maximize the advantages of Lagrangian and Eulerian elements, and to minimize the disadvantages. Therefore, this method is appropriate for the analysis of porous media that are considered for the behavior of the solids and the fluids. In this work, governing equations of porous media based on ALE description are obtained from governing equations in frame of updated Lagrangian description. Then, weak forms of these equations are derived using arbitrary weighting functions.

• Wind and Structures
• /
• 제1권3호
• /
• pp.271-284
• /
• 1998

This paper uses the numerical simulation to investigate the interference effect of 3-D turbulent flow around two high rise buildings in proximity at the different relative heights, gaps, and wind velocities. The computer program used to carry out the simulation is based on the control volume method and the SIMPLEST algorithm. The ${\kappa}-{\varepsilon}$ model was used to simulate turbulence effects. Since the contracted flow between two adjacent buildings enhances the strength of vortex shedding from the object building, the pressure coefficient on each side wall of the object building is generally increased by the presence of apposed building. The effect is increased as the relative height or the gap between the two buildings decreases. The velocity on the vertical center line between two buildings is about 1.4 to 1.5 times the upstream wind velocity.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1570-1577
• /
• 2002

In order to investigate the characteristics of two-phase slug flow, an electromagnetic flowmeter with 240Hz triangular AC excitation was designed and manufactured. The signals and noise from the flowmeter were obtained, and analyzed in comparison with the observations with a high speed CCD camera. The uncertainty of the flowmeter under single-phase flow was $\pm$ 2.24% in real-time. For two-phase slug flow, electromagnetic flowmeter provided real-time simultaneous measurements of the mean film velocity around Taylor bubble and the relative location and the length of the bubble. Besides, it is an easier and cheaper method for measuring mean film velocity than others such as photochromic dye activation method or particle image velocimetry.

• 약학회지
• /
• 제13권4호
• /
• pp.125-138
• /
• 1969

The absorptions of aminopyrine, molecular compounds of aminopyrine and mixed compounds of aminopyrine were studies in the small intestine of rats (in situ). The molecular compounds of aminopyrine were more absorbed than aminopyrine and mixed compounds of aminopyrine were less absorbed than aminopyrine in small intestine of rats. The appearent permeability coefficients and the absorption velocity constants of the molecular compound of aminopyrine-barbital were highest and the orders of decreasing in values of permeability coefficients and the absorption velocity constants of the other molecular compounds are as follows: Aminopyrine-secobarbital, Aminopyrine-phenobarbital Aminopyrine-amobarbital, Aminopyrine-cyclobarbital Aminopyrine-allobarbital. The orders of decreasing in values of the appearent permeability coefficients and the absorption velocity constants of the mixed compounds of aminopyrine are as follows: Aminopyrine secobarbital, Aminopyrine allobarbital Aminopyrine cyclobarbital, Aminopyrine amobarbital Aminopyrine phenobarbital, Aminopyrine barbital. The relative absorption rates of aminopyrine, molecular compounds of aminopyrine and the mixed compounds of aminopyrine by the goldfish method and the partition coefficients were correlative to the values of circulation method.

• International Journal of Fluid Machinery and Systems
• /
• 제9권1호
• /
• pp.95-106
• /
• 2016

A method of optimization design for the blade profile of a centrifugal impeller by controlling velocity distribution is presented, and a plenum fan is successfully designed. This method is based on the inner flow calculation inside the centrifugal impeller, and is related to the distribution of relative velocity. The results show that after optimization, the boundary layer separation on the suction surface has been inhibited and the stability of plenum fan is improved. The flow at the impeller outlet is also studied, and the jet-wake pattern at the impeller outlet is improved obviously by optimization. The calculation result shows that the static pressure and static pressure efficiency can be increased by 15.4% and 21.4% respectively.

• 한국수자원학회논문집
• /
• 제38권10호
• /
• pp.811-824
• /
• 2005

ADCP는 음파의 도플러 효과를 이용하여 하천을 횡단하면서 단시간에 유속과 유량을 측정할 수 있는 장비이다. 본 연구는 현장 하천에서 ADCP를 이동식으로 운용하여 측정한 유속, 유량 자료를 동일한 지점에서 측정한 유속-면적법과 비교하여 ADCP를 이용한 유속, 유량 자료의 특성을 살펴볼 목적으로 수행되었다. ADCP에 의해 측정된 수심 분포는 직접 측심에 의해 측정한 수심 분포와 거의 일치하였다. ADCP로 측정한 유속은 순간적이므로 개별 연직유속분포는 시간평균한 유속-면적법 자료와 차이가 있었으나 유속 측선의 좌우에 근접한 자료를 공간적으로 평균할 경우 그 차이는 감소하고 유사한 유속 패턴을 나타내었으며, 왕복하여 반복한 측정 자료를 평균할 경우에도 시간평균한 자료와 비슷한 연직유속분포를 나타내었다. 수평유속분포의 경우 ADCP의 개별 자료 및 이를 중간단면적법에 해당하는 구간 하폭만큼 평균한 자료 역시 유속-면적법 자료와 잘 일치하는 양상을 나타내었다. 유량의 경우 한 지점에서 수 회 이상 평균한 값은 유속-면적법과 비교하여 $0.1\%{\~}9.3\%$의 차이가 나는 것으로 조사되었으며, 반복 측정 횟수를 늘릴 경우 유속-면적법 대비 오차가 감소하는 것으로 나타났다.