• Journal of the Korean Geotechnical Society
• /
• v.29 no.9
• /
• pp.43-54
• /
• 2013

This study proposed a new embankment stability control method to analyze the measurement data on the slope activities of the soft ground, using the Stability Control Index (SCI) obtained from the p-q stress paths. In order to validate this new technique, the data from triaxial compression tests (CU) and field measurement were compared. SCI is calculated from the current path of the effective stress points ($p^{\prime}=p-{\Delta}u$) using the relative position between the Total Stress Path $p_{max}$ and the point of $k_f$ line $p_f$. From this result, the point of effective stress $p^{\prime}(=p-{\Delta}u)$ will have access to the point $p_f$ of $k_f$ line when the pore water pressure occurs or the point of total stress pass $p^{\prime}_{max}$ when the pore pressure dissipates. Thus, the Stability Control Index (SCI) can evaluate quantitatively the safety of embankment from the relative position of the effective stress path.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.3
• /
• pp.142-151
• /
• 2004

A method for the determination of concrete armor unit weights with hydraulic stability and structural stability may be formulated in this paper. The hydraulic stability is analyzed by using Hudson's formula, the structural stability is also studied by evaluation of maximum flexural tensile stresses in armor unit induced by the impact loads and by comparison of those with the tensile resistance strength directly. The applicable criteria for concrete armor units can be represented as a function of design wave heights with return period, armor weights, and tensile strengths for the practical uses. In addition, reliability analyses for two failure modes are carried out to take into account some uncertainties. Finally, a series system for two-failure mode analysis can be made up straightforwardly, by which the optimal weights of armor units can be estimated with the various relative breakages, given the specific target probability of failure under the concepts of reliability-based design method.

• KSBB Journal
• /
• v.8 no.2
• /
• pp.133-142
• /
• 1993

The effects of genetic and environmental factors on productivity of a cloned protein were studied in recombinant Saccharomyces cerevisiae. Plasmid stability and copy level were very high for a $REP^+$ system(at ca. 10 generations, stability: 65-90%, plasmid copy number per cell: 40-200), whereas these were very low for a yep- system(at ca. 10 generations, stability: 30%, plasmid copy number per cell 20). In plasmids containing the $2{\mu}m$ circle genome, a $[cir^o]$ strain was a preferred host cell since the plasmid stability and the copy number in a $[cir^o]$ strain were higher than in a $[cir^+]$strain. Cloned gene expression was dependent on plasmid copy number and stability. The inducer (galactose) level played a very important role in cloned lacZ gene expression, showing that a galactose concentration of 0.8% was sufficient for induction of gene expression. Induction rate was very fast in the case of plasmids exhibiting high stability and copy number by a factor of 4 to 25. The time to reach the peak value of gene expression was longer when galactose was added at the start of fermentation (ca. 26 hours) than at the mid-exponential phase (ca. 6 hours). Glucose repression was reduced by a factor of 2 to 5 as the relative inducer level increased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3494-3499
• /
• 2009

The stability of omeprazole in the aqueous solutions containing loxoprofen or Sodium bicarbonate was examined at room temperature. Loxoprofen or Sodium bicarbonate (60 mg) was added to omeprazole (600 ${\mu}g$/ml) solution to check the stability profile. Then, the solution was kept at room temperature for 80 hours. The concentration was assayed at each concentration by stability-indicating High performance liquid chromatography (HPLC) method. Aliquots of the solution were withdrawn at specified time intervals and assayed by chromatographic analysis for intact omeprazole. The relation between omeprazole concentration and peak area was linear from 5 to 160 ${\mu}g$/ml. The analysis method was precise with relative standard deviation (% RSD) no greater than 3.05 %. The remaining percentage-time curves revealed that omeprazole was degraded rapidly as functions of time and temperature following pseudo first-order kinetics. In conclusion, the stability of omeprazole was significantly affected by liquid solutions mixed with alkalizer (Sodium carbonate) or the NSAIDs (loxoprofen).

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.166-172
• /
• 2000

Friction characteristics of phenolic resin-based friction composites containing threedifferent relative amounts of graphite and zirconium silicate were investigated by using a pad-on-disk type friction tester. Constant temperature test and constant interval test at three different initial temperatures(100. 200, 300$^{\circ}C$) were performed to examine the effects of friction heat on friction characteristics at elevated temperature. The friction composite(FMO.7) with higher content of ZrSiO$_4$showed unstable friction force at higher temperature and resulted in larger fluctuations of vibration during friction test. The abrasive action of ZrSiO$_4$in friction composite impeded stable transfer film and induced higher friction heat at friction interface. Friction oscillations according to the temperature were associated with the formation of transfer film(i'd body layer) on the friction composite and the counter part.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1667-1670
• /
• 1997

We consider the probelem of identifying and underwater vehicle. It is assumed that a priori information about the parameteric model structure and values of the hydrodynamic coefficients is available from some other schemes. The concept of relative esnsitivity is introduced to plan and efficinet identification procedure. An analysis of the sensitivity of the overall system to a particular hydrodynamic coefficinet provides a tool to evaluate the relative importance of the same coefficient in a particular maneuver. Then it can be made possible to reduce the filter size by selecting some dominatn hydrodynamic coefficients as parameters to be estimated for a given maneuver, and this fact may be used for establishing a gradual identification scheme. The main merit of a gradual identification is substantially reduced computer burden with increased nimerical stability. An illustrative simualtion result is given.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.270-273
• /
• 2006

Bond between reinforcing bar and the surrounding concrete is made up of three components. There are chemical adesion, friction, and mechanical interaction between the rib of the bar and the surrounding concrete. bond of deformed bars depends primarily on the beraing of rib deformation anainst the surrounding concrete. The final objective of the study is to enhance structural stability, and workability thorough increasing the bond strength between deformed bar and surrounding concrete. The results of this study will be used to shorten bond and development length by $20{\sim}30$ percent and it will facilitate to use of high strength and high-relative rib area bars.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.6
• /
• pp.47-52
• /
• 2007

This paper presents the design of a submerged breakwater, which functions as an eco-structure in a marine environment. Newly patented blocks were used in the submerged breakwater to both make it stable and provide an inhabitable space for fish. To investigate the wave transmission of the proposed submerged breakwater, parametric studies were conducted through two-dimensional hydraulic tests, which were carried out at the National Fisheries Research and Development Institute (NFRDI) in South Korea. Those parameters are relative crest width (B/L), wave steepness (H/L), relative crest depth (hB/H), and submerged breakwater configuration. The hydraulic experimental results can be used to predict the performance of the proposed submerged breakwater covered with the multi-function blocks.

• Journal of Ginseng Research
• /
• v.5 no.2
• /
• pp.108-113
• /
• 1981

Major quality indices for deterioration of red ginseng including oxidation of lipids and change of brown color intensity were periodically investicated during storage of Red Ginseng under various water activity conditions at 3$0^{\circ}C$. The results obtained were summarized as follows. 1. The monolayer moisture contents were 3.25% and 6.3% for red ginseng and red ginseng powder, respectively, and the corresponding water activities were 0.14 and 0.16, respectively. 2. Oxidation of lipids as measured by TBA value increased with an increase in relative humidity and storage period 3. Under storage conditions above 42% R H., brown color intensity also increased in similar fashion to that of oxidation of lipids as relative humidity and storage Period increased 4. It was concluded from above results that water activity of Red Ginseng should be kept less than 0.57 so that red ginseng could Preserve stable qualify.

• Journal of Sensor Science and Technology
• /
• v.12 no.6
• /
• pp.241-248
• /
• 2003

An electrochemical humidity sensor was fabricated with poly(1,5-diaminonaphthalene) film coated on a gap of two splitted gold electrodes, which were made by vacuum deposition. Response currents according to humidity were measured by the potential sweep method and chronoamperometry. The stability of the polymer film was improved by double step chronoamperometry using the applied voltage of ${\pm}0.5$ Vdc. The response time determined by the pulse technique was about ${\sim}50$ msec and the relative standard deviation of current response was within ${\pm}5.0%$. The response current of the film was intrinsically humidity dependent. The film exhibited a non-linear but reproducible response in ordinary range of relative humidity. The linear equations were $I(nA)=0.28{\times}%RH-1.01$ between 10 to 70 %RH and $I(nA)=6.05{\times}%RH-403.21$ between 70 to 90 %RH.