• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.8
• /
• pp.1159-1168
• /
• 2012

The experiment was carried out to investigate the effects of Alisma canaliculatum with probiotics (ACP) on the growth performance, meat composition, oxidative stability, and fatty acid composition of broiler meat. Sixteen probiotic strains were tested for their levels of acid, bile, and heat tolerance. Among them, Lactobacillus acidophilus KCTC 3111, Enterococcus faecium KCTC 2022, Bacillus subtilis KCTC 3239, and Saccharomyces cerevisiae KCTC 7928 were selected for use in ACP. Exactly 140 Ross broiler chicks were assigned to four dietary treatments in five replications for 5 wks in a completely randomized design. The dietary treatments were NC (Negative control; basal diet), PC (Positive control; basal diet with 0.005% Chlortetracycline), ACP-0.5% (basal diet with 0.5% ACP powder), and ACP-1% (basal diet with 1% ACP powder). According to the results, body weight of the broilers increased, and feed conversion ratio improved in the ACP-0.5% group compared to the NC group (p<0.05). Crude protein content of breast meat was higher (p<0.05) in the ACP-0.5% group, whereas crude fat content of thigh meat was lower (p<0.05) in the supplemented groups. Breast meat absolute and relative weights were both higher (p<0.05) in the ACP groups compared to the control group. Further, ACP diets increased gizzard and decreased large intestine relative weights, whereas kidney relative weight decreased upon the addition of a higher level (1%) of ACP (p<0.05). Thiobarbituric acid reactive substances values of breast and thigh meats were reduced (p<0.05) by ACP supplementation compared to control. Regarding the fatty acid composition of breast meat, arachidonic acid, docosahexaenoic acid, PUFA, and n6 fatty acid levels decreased (p<0.05) in the ACP groups, whereas the levels of linoleic acid, PUFA, PUFA/SFA, and n6 fatty acid in thigh meat decreased (p<0.05) by ACP and PC diets. It can be suggested based on the study results that ACP-0.5% diet could be an effective feed additive for broilers.

• Journal of Biomedical Engineering Research
• /
• v.17 no.1
• /
• pp.61-70
• /
• 1996

In cementless total hip arthroplasty(THA), an initial stability of the femoral component is mandatory to achieve bony inyowth and secondary long term fixation. Primary stability of the femoral component can be obtained by minimizing the magnitude of relative micromotions at bone stem interface. An accurate evaluation of interf'ace micromotion and stress/strain fields in the bone-implant system may be relevant for better understanding of clinical situations and improving THA design. Recently finite element method(FEM) was introduced in'orthopaedic research field due to its unique capacity to evaluate stress in structure of complex shape, loading and material behavior. The authors developed the 3-dimensional finite element model of proximal femur with $Multilock^{TM}$ stem of 1179 blick elements to analyse the micromotions and mechanical behaviors at the bone-stem inteface in early post-operative period for the load simulating single leg stance. The results indicates that the values of relative motion for this well fit stem were $150{\mu}m$ in maximum $82{\mu}m$ in minimum and the largest relative motion was developed in medial region of Proximal femur and in anterior-posterior direction. The motion in the proximal bone was much greater than in the distal bone and the stress pattern showed high stress concentration on the cortex near the tip of the stem. These findings indicate that the loading on the hip joint in the early postoperative situation before achieving bony ingrowth could produce large micromotion of $150{\mu}m$ and clinicaly non-cemented THA patient should not be allowed weight bearing strictly early in the postoperative period.

• Journal of People, Plants, and Environment
• /
• v.24 no.6
• /
• pp.573-584
• /
• 2021

Background and objective: This study was conducted with 10 men and women in their 50s-60s to investigate the effect of agro-healing activities on the improvement of mental health. Methods: The experimental group participated in total 8 sessions of agro-healing activities, once a week for 2 hours each, at a care farm in Wanju-gun. Physiological measurements were taken with an electroencephalogram (EEG), Salivettes samples, and blood pressure before and after the activities. Results: As a result of analyzing the changes in brainwaves of the experimental group before and after agro-healing activities, relative slow alpha (RSA), relative fast alpha (RFA), and ratio of alpha to high beta (RAHB), the indices of stability and relaxation, increased after the program with statistical significance. Also, the ratio of SMR to theta (RST) of the attention index increased on the right frontal lobes, temporal lobes, and left occipital lobes, and relative low beta (RLB) increasd on the frontal lobes, temporal lobes, and occipital lobes after the program with statistical significance. The sympathetic nervous system activity, which is a stress index, decreased after the program, whereas the parasympathetic nervous system activity, which is a relaxation index, increased, showing statistical significance (p < .05). As a result of analyzing the changes in blood pressure after the program, systolic blood pressure and diastolic blood pressure decreased from prehypertension to normal blood pressure, showing statistical significance. SThese results indicate that participating in agro-healing activities at a care farm for the 50-60s helps reduce stress and improve stability and relaxation as well as attention. Conclusion: Thus, developing and applying customized agro-healing programs for participants will have a positive effect on brain activity and psychophysiological improvement by relieving tension and stress. However, there are limitations in generalizing the results of this study since most of agro-healing farms have low accessibility that leads to a low level of participants.

• Journal of People, Plants, and Environment
• /
• v.22 no.4
• /
• pp.355-364
• /
• 2019

This study was conducted to find out the effects of agro-healing activities and strolling on the physiological conditions of patients with chronic metabolic diseases. A total of 11 subjects participated in agro-healing activities, and their average age was 49.6±11.3. Changes in their salivary cortisol were compared and analyzed before and after participating in the agro-healing activity program, and it was found that the stress hormone decreased after participating in the program. Differences in brain wave between before and after participating in agro-healing activities and strolling were measured, and the ratio of alpha to high beta (RAHB) of subjects increased in most of the measured points after participating in agro-healing activities. In addition, the increase in the value in the temporal lobe (T3) that controls mortor skills and occipital lobe (O2) that controls visual functions indicates that the activities were effective in improving relaxation and stability. The relative low beta (RLB) power spectrum of subjects also statistically significantly decreased in the right occipital lobe (O2) that controls visual functions, the relative mid beta (RMB) and relative high beta (RHB) power spectrum decreased in the left temporal lobe (T3) and the right occipital lobe (O2). These results indicate that the activities were effective in improving relaxation under no stress and tension. The systolic and diastolic blood pressure of subjects after participating in agro-healing activities decreased from the prehypertension level to the normal level. These results indicate that horticultural activities and visual elements in healing farms, such as agro-healing activities and strolling, have positive impacts on patients with chronic metabolic diseases accompanied with diabetes or high blood pressure by increasing the brain activity and psycho-physiological conditions of participants.

• Nanomaterials
• /
• v.12 no.7
• /
• pp.1158-1168
• /
• 2022

Commercial lithium-ion batteries using liquid electrolytes are still a safety hazard due to their poor chemical stability and other severe problems, such as electrolyte leakage and low thermal stability. To mitigate these critical issues, solid electrolytes are introduced. However, solid electrolytes have low ionic conductivity and inferior power density. This study reports the optimization of the synthesis of sodium superionic conductor-type Li_1.5Al_0.3Si_0.2Ti_1.7P_2.8O₁₂ (LASTP) solid electrolyte. The as-prepared powder was calcined at 650 ℃, 700 ℃, 750 ℃, and 800 ℃ to optimize the synthesis conditions and yield high-quality LASTP powders. Later, LASTP was sintered at 950 ℃, 1000 ℃, 1050 ℃, and 1100 ℃ to study the dependence of the relative density and ionic conductivity on the sintering temperature. Morphological changes were analyzed using field-emission scanning electron microscopy (FE-SEM), and structural changes were characterized using X-ray diffraction (XRD). Further, the ionic conductivity was measured using electrochemical impedance spectroscopy (EIS). Sintering at 1050 ℃ resulted in a high relative density and the highest ionic conductivity (9.455 × 10^-4 S cm^-1). These findings corroborate with the activation energies that are calculated using the Arrhenius plot. Therefore, the as-synthesized superionic LASTP solid electrolytes can be used to design high-performance and safe all-solid-state batteries.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.4
• /
• pp.181-190
• /
• 2013

In this study, a total of 51 cases of hydraulic model tests has been conducted for various wave conditions and slope angles of breakwater to develop a stability formula for Rakuna-IV armoring a rubble-mound breakwater. The stability number of the formula is expressed as a function of relative damage, number of waves, structural slope, and surf similarity parameter. The stability formula is derived separately for plunging and surging waves, the greater of which is used. The transitional surf similarity parameter from plunging waves to surging waves is also presented. Lastly, to explain the stability of Rakuna-IV to the engineers who are familiar with the stability coefficient in the Hudson formula, the required weight of Rakuna-IV is calculated for varying significant wave height for typical plunging and surging wave conditions, which is then compared with those of the Hudson formula using several different stability coefficients.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.3
• /
• pp.306-315
• /
• 2012

In this study, storage stability of reduced sulfur compounds ($H_2S$, $CH_3SH$, DMS, $CS_2$, and DMDS) and $SO_2$ in sampling bags was investigated in terms of two contrasting storage approaches between forward (F) and reverse (R) direction. The samples for the F method were prepared at the same time and analyzed sequentially through time. In contrast, those of reverse (R) method were prepared sequentially in advance and analyzed all at once upon the preparation of the last sample. In addition, relative performance between two different bag materials (PVF and PEA) was also assessed by using 100 ppb standard. The response factors (RF) of gaseous RSC samples were determined by gas chromatography/pulsed flame photometric detector (GC/PFPD) combined with air server (AS)/thermal desorber (TD) system at storage intervals of 0, 1, and 3 days. There is no statistical difference in all RSCs between two storage methods. However, the results of relative recovery indicated 2.58~12.8% differences in compound type between the two storage methods. Moreover, loss rates and storage stability of $H_2S$ and $SO_2$ were considerably affected by bag materials than any other variables. Therefore, some considerations about storage methods (or bag material types) for sulfur compounds are needed if stored by sampling bag method.

• Korean Journal of Ecology and Environment
• /
• v.37 no.2 s.107
• /
• pp.137-148
• /
• 2004

Based on the Merritt-Cummins system, the Korean immature aquatic and semiaquatic insects were reviewed and categorized into 6 different functional feeding groups (FFG) at the generic levels (257 genera belonging to 96 families, 10 orders),Among 257 genera, the most abundant FFG was the predator type consisting of 122(47%) genera. The second and third major groups were gathering-collectors (33genera, 13%) and shredders (21, 8%), respectively. Next group was occupied by scrapers (20,7%), and followed by filtering-collectors (12,5%) and plant-piercers (6, 2%). In addition, a total of 43 genera in 7 orders were remained as uncategorized groups. Both relative degrees of resistance and resilience of each genus were also analyzed to evaluate the role of each FFG in maintaining community stability. The results elucidated that the gathering-collectors and the scrapers could play a role as a pioneer group and a functional mediator in the community, respectively. The results also indicated that the practical use of relative resistance and resilience degrees could be applied to conduct comprehensive studies in stream ecosystems.

• Transactions of the Society of Information Storage Systems
• /
• v.8 no.2
• /
• pp.50-55
• /
• 2012

Optical disks are widely used in libraries and archives as digital data media due to their long-term storage stability. Though archive-grade optical disks are already available on the market, there is a relative less focusing on the reliable recording conditions. Commercial BD-R media were recorded at various recording speeds with the maximum speed of 6X, and tested at the acceleration aging conditions. Through the evaluation of long-term storage features by the data stability test, lower recording speed of 2x resulted in better long-term storage stability. In addition, degradation aspects of unstable long-term storage feature at outer region of disk were discussed.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.59-69
• /
• 1992

In order to predict the distribution of chemical species of copper and cadmium in water, conditional stability constant and complexation capacity between copper or cadmium and natural aquatic sediment have been determined in a shallow lake in Haman, Kyungnam. Kinetic parameters were calculated by Langmuir isotherm equation. Conditional stability constant was log $K_{cuSed}=4.78 and log K_{cdSed}=4.45$. Complexation capacity was $1.70{\times}10^{-4}$moles/g for copper and $5.54{\times}10^{-5}$moles/g for cadmium. Accuracy of experimental values of conditional stability constant was checked by comparing the calculated concentration of the metals with the measured one. Relatively good agreement between these values was obtained. Relative errors were 8.9% for copper and 6.5% for cadmium. Data of the measured conditional stability constant were put into data base of MINEQL computer program, and concentration of various chemical species of copper and cadmium in a model aquatic system was calculated. Aquatic sediment was associated with copper at the concentration of $10^{-5M}(0.059g/\ell)$10-5M(0.059g/l) and with cadmium at the concentration of $10^{-6M}(0.018g/\ell)$, and it significantly influenced on the distribution of chemical species of the metals. This result showed that prediction of chemical species of the heavy metals in an aquatic system should be taken into account the influence of the sediment.