• Journal of the Korean Geotechnical Society
• /
• v.20 no.2
• /
• pp.131-141
• /
• 2004

For geotechnical applications, engineers use data obtained from a site investigation to interpret the structure and potential behavior of the subsurface. In most cases, these data consist of samples that represent 1/100,000 or less of the total volume of soil. These samples and associated field and lab testing provide the information used to estimate soil parameter values. The resulting values are estimated ones and there exists some likelihood that actual soil conditions are significantly different from the estimates. This may be the case even if the sampling and interpretation procedures are performed in accordance with standard practice. Although these efforts have been made to characterize the uncertainty associated with geotechnical parameters, there is no commonly accepted method to evaluate quantitatively the quality of an investigation plan as a whole or the relative significance of individual sampling points or potential sampling points.

• Annual Conference on Human and Language Technology
• /
• 1992.10a
• /
• pp.367-375
• /
• 1992

한국어는 다른 언어와는 달리 초성, 중성, 종성의 자소가 모여서 한 음절을 이룬다. 음절을 이루는 자소는 그 발생의 확률적 성질에 따라 확률변수로 간주된다. 음절 안에서 자소간의 발생의 상관관계는 자소간 조건부 확률 및 엔트로피로 표시된다. 음절이 모여서 단어를 이루고 단어를 이루는 음절은 그 발생의 확률적 성질에 따라 확률변수로 간주된다. 한국어 단어안에서 음절간의 발생의 상관관계는 음절간 조건부 확률 및 엔트로피로 표시된다. 수 있다. 그런데 가능한 음절의 종류가 매우 많기 때문에 음절 발생의 상관관계를 표시하는 지표로서 음절간 조건부 확률 대신 초성, 중성, 종성 단위의 조건부 확률을 사용하는 것이 음절간의 발생의 상관관계를 표시하는데 효과적이다. 이러한 한국어의 정보이론적 연구를 위하여서는 기초자료로서 한국어 단어의 빈도분포가 필요하다. 한국어 단어의 빈도분포의 포괄적인 조사는 1956년의 "우리말 말수 사용의 잦기 조사"가 유일한 실정이다. 시간 경과에 따른 한국어의 정보이론적 특성 변화의 분석을 위하여서는 한국어 단어 빈도의 주기적인 조사가 필요하다. 한국어에서 초성, 중성, 종성단위의 정보이론적 연구결과는 한국어 음성인식 및 함성, 자연언어처리, 암호법, 언어학, 음성학, 한국어부호 표준화 연구등에 이용될 것으로 기대된다. 남북한의 언어는 분단이 지속됨에 따라 상호 이질화가 진행되고 있다. 이러한 이질화를 극복하려는 부분적인 노력으로 남북한 언어의 한국어 영문표기의 단일화 등이 있었다. 이러한 노력에 병행하여 남한과 북한의 언어에 대한 정보이론적 비교 연구도 있어야 할 것이다. 정보를 효과적으로 캐싱할 수 있도록 인접한 데이터를 클러스터링해서 브로드캐스팅하여 이동 호스트의 구성 시간(setup time)을 최소화하였다. 그리고, 맨하탄거리(Manhattan Distance)를 사용해서 위치 의존 질의에서 사용하는 데이타를 캐싱하고 질의를 처리하는 방법을 제안한다. 맨하탄 거리를 이용해서 캐싱하면 도로에 인접해서 위치한 데이타를 효과적으로 캐싱할 수 있다. 또한, 거리 계산 방법으로 맨하탄 거리를 사용하면 도심에서 실제 이동 거리와 비슷한 값을 알 수 있고, 직선 거리 계산식에 비해서 계산식도 간단하기 때문에 시스템 계산량도 줄일 수 있다. 기준으로 라이신 부산물은 어분 단백질을 40%까지 대체가 가능하였으며, 아울러 높은 라이신 부산물의 대체 수준에 있어서 사료효율과 단백질 전환효율을 고려한다면 아미노산 첨가(라이신과 아르지닌)와 중화 효과에 좋은 결과가 있을 것으로 사료된다.의한 적정 양성수용밀도는 각고 5~6cm 크기의 경우 10~15개체가 적합하였다. 수증별 성장은 15~20 m 수층에서 빨랐으며, 성장촉진과 폐사를 줄이기 위해서는 고수온이 지속되는 7~10월에는 20~30m수층으로 채롱을 내려 양성하고 그 외 시기에는 15 m층 내외가 좋은 것으로 나타났다. 상품으로 출하 가능한 크기 인 각고 10 cm이상, 전중량 140 g 내외로 성장시 키기까지는 채묘후 22개월이 소요되었고, 출하시기는 전중량 증가가 최대에 이르는 3월에서 4월 중순이 경제적일 것으로 판단된다.er 90 % of good relative dynamic modulus of elasticity due

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.398-403
• /
• 2012

Purpose: Mandible resection and discontinuity defect created lead to aesthetic and functional problems. The iliac crest bone graft exhibits relative ease for bone harvesting, possibility of two team approach, ability to close the wound primarily, large amount of corticocancellous bone and relatively few complications. Whereas the use of free vascularized flaps has donor site morbidity and worse-fitting bone contour, the use of nonvascularized iliac bone graft has advantages in the operation time and patients' recovery time. So, nonvascularized iliac bone graft could be an attractive option. Methods: Twenty-one patients (M:F=1:1.1) underwent iliac crest bone harvesting for reconstruction of mandibular discontinuity defect (mean length : $61.6{\pm}17.8$ mm), from May 2005 to October 2011 at the Department of Oral and Maxillofacial Surgery in Kyungpook National University. The average age was $44.1{\pm}16.4$ years and the mean follow up periods was $28.2{\pm}22.7$ months. Bone resorption rate, according to age, sex, primary lesion, location and distance of defect, type of fixation plate, time of graft and pre-operative radiation therapy, were measured in each patient. Results: The mean bone resorption rate was $16.1{\pm}9.0%$. Bone resorption rate was significantly increased in mandibular defect that is over 6 cm in size (P=0.015, P<0.05) and the cases treated pre-operative radiation therapy (P=0.017, P<0.05). All was successfully fixed and maintained for the long-term follow-up. There were a few donor site complications and almost all patients were shown favorable outcome without severe bone resorption in this study. Conclusion: The nonvascularized iliac bone graft seems to be a reasonably reliable treatment option for reconstruction of mandibular discontinuity defects.

• Progress in Medical Physics
• /
• v.7 no.1
• /
• pp.53-64
• /
• 1996

Purpose: The purposes of this paper are to develop a theoretical basis that the beam directions should be considered when the mechanical accuracy of teletherapy machine is evaluated by the star pattern test, to develop methods using asymmetric field in length to simulate beam direction for the case that beam direction does not appear on film. Method: In evaluating mechanical rotational accuracy of the gantry of teletherapy unit by the star pattern test, the direction of radiation beams was considered. A star pattern using some narrow beams was made. Density profiles at 10cm far from estimated gantry axis on the star pattern were measured using an optical densitometer. On each profile, one coordimate of a beam axis was determined. A pair of coordinates on a beam axis form an equation of the axis. Assume that a unit vector equation omitted is with same direction as radiation beam and a vector equation omitted is a vector directing to the beam axis from the estimated gantry axis. Then, a vector product equation omitted ${\times}$ equation omitted is an area vector of which the absolute value is equal to the distance from the estimated gantry axis to the beam axis. The coordinate of gantry axis was obtained by using least-square method for the area vectors relative to the average of whole area vectors. For the axis, the maximum of absolute value of area vectors would be an accuracy of the gantry rotation axis. For the evaluation of mechanical accuracies of collimator and couch axes for which beam direction could not be depicted on a star pattern test film, narrow beams asymmetric in field length was used to simulate beam direction. Result: For a star test pattern to evaluate the mechanical accuracy of rotational axes of a telectherapy machine, the result considering beam direction was different from that ignoring beam direction. For the evaluation of mechanical accuracies of collimator and couch axes by means of a star pattern test, narrow asymmetric beams could simulate beam direction. Conclusion: When a star pattern test is used to evaluate the mechanical accuracy of a teletherapy unit, beam direction must be considered or simulated, and quantitatively evaluated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.3
• /
• pp.271-277
• /
• 2014

Internal structures, especially those located in the upstream of a reactor core, may have a significant influence on the core inlet flow rate distribution depending on both their shapes and the relative distance between the internal structures and the core inlet. In this study, to examine the effect of the reactor internal structure geometry treatment method on the prediction accuracy for the scale-down APR+ flow distribution, simulations with real geometry modeling were conducted using ANSYS CFX R.14, a commercial computational fluid dynamics software, and the predicted results were compared with those of the porous medium assumption. It was concluded that the core inlet flow distribution could be predicted more accurately by considering the real geometry of the internal structures located in the upstream of the core inlet. Therefore, if sufficient computational resources are available, an exact representation of these internal structures, for example, lower support structure bottom plate and ICI nozzle support plate, is needed for the accurate simulation of the reactor internal flow.

• Journal of Korea Water Resources Association
• /
• v.35 no.1
• /
• pp.1-12
• /
• 2002

This study was intended to investigate the rainfall-runoff relationship with spatially distributed rainfall data, and then, to analyze and quantify the uncertainty induced by spatially averaging rainfall data. For constructing spatially distributed rainfall data, several historical rainfall events were extended spatially by simple kriging method based on the semivariogram as a function of the relative distance. Runoff was computed by two models; one was the modified Clark model with spatially distributed rainfall data and the other was the conventional Clark model with spatially averaged rainfall data. Rainfall errors and discharge errors occurred through this process were defined and analyzed with respect to various rain-gage network densities. The following conclusions were derived as the results of this work; 1) The conventional Clark parameters could be appropriate for translating spatially distributed rainfall data. 2) The parameters estimated by the modified Clark model are more stable than those of the conventional Clark model. 3) Rainfall and discharge errors are shown to be reduced exponentially as the density of rain-gage network is increased. 4) It was found that discharge errors were affected largely by rainfall errors as the rain-gage network density was small.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.3
• /
• pp.227-232
• /
• 2014

Ageratina altissima is an invasive plant species known to threaten native plant communities in Korea. A. altissima is thought to invade shady forests from disturbed open areas; however, uncertainty remains as to how shade and litter depth might affect establishment. A study of A. altissima distribution characteristics in areas adjacent to trails was undertaken at Mt. Umyeon in Seoul, Korea. Increasing densities of A. altissima were found to correlate with greater light availability and decreasing litter depth (p < 0.001) within 10 m distance from trail locations and on ridges rather than further within forests and valleys. The effects of soil moisture content, soil gravel content and soil pH on distribution were not found to be significant, suggesting that A. altissima is adaptable to a broad range of soil conditions. Results indicate that forest areas close to trails may be particularly susceptible place to A. altissima invasion, demonstrating the need to carefully consider implications for A. altissima expansion in trail management.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.397-407
• /
• 2015

In this paper, we designed 1 chip IC for 3-axis gyroscope and 3-axis accelerometer used for various IoT/M2M mobile devices such as smartphone, wearable device and etc. We especially focused on analysis of gyroscope noise and proposed new architecture for removing various noise generated by gyroscope MEMS and IC. Gyroscope, accelerometer and geo-magnetic sensors are usually used to detect user motion or to estimate moving distance, direction and relative position. It is very important element to designing a low noise IC because very small amount of noise may be accumulated and affect the estimated position or direction. We made a mathematical model of a gyroscope sensor, analyzed the frequency characteristics of MEMS and circuit, designed a low noise, compact and low power 1 chip 6-axis inertial sensor IC including 3-axis gyroscope and 3-axis accelerometer. As a result, designed IC has 0.01dps/${\sqrt{Hz}}$ of gyroscope sensor noise density.

• Journal of the Korean Society of Safety
• /
• v.18 no.2
• /
• pp.132-138
• /
• 2003

The use of long rails in high-speed railway bridges causes additional stresses due to nonlinear behaviours between the rail and bridge decks in the neighbourhood of the deck joints. In the seismic response analysis of high-speed railway bridges, since structural response is highly sensitive to properties of the ground motion, spatial variation of the ground excitation affects responses of the bridges, which in turn affect stresses in the rails. In addition, it is shown that high-speed trains need very long distances to stop when braking under seismic occurrence corresponding to operational earthquake performance level so that verification of the safe stoppage of the train is also required. In view of such additional stresses due to long rails, sensibility of structural response to the properties of the ground motion and braking distance needed by the train to stop safely, this paper proposes and establishes a time domain nonlinear dynamic analysis method that accounts for braking loads, spatial variation of the ground motion and material nonlinearities of rails to analyze long rail stresses in high-speed railway bridges subjected to seismic event. The accuracy of the proposed method is demonstrated through an application on a typical site of the Korean high-speed railway.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.9
• /
• pp.744-750
• /
• 2013

In this paper, we proposed new type of an artificial magnetic conductor(AMC) structure, which has a high impedance surface for realizing the meta-material characteristics. The designed AMC structure set a goal of 3.2GHz, and the reflector, which consists of periodically arrayed AMCs is fabricated and measured. The high impedance improves the reflection coefficient, decreases the system size and interference, and increases the antenna performance. The structure has embodied the high impedance by the thickness and relative permitivity of the dielectric substrate and the design configuration without the metallic via hole which connects the AMC to the GND. The bandwidth is 150% broader than the similar AMC structures. Also, the distance between the antenna and the AMC reflector is decreased by ${\lambda}/10$ as working as the metal(PEC) reflectors. The antenna radiation characteristics are 3dB increased at 10mm away from reflector by measurement. The proposed reflector could be inserted in the portable mobile devices, and the antenna's performance has improved by the reflector. The specific absorption rate is dramatically decreased over 94% because the back radiation of the antenna is shielded.