• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.247-248
• /
• 2006

Carbon nitride films were evaluated that they had many advantages for miniature micro-humidity-sensors using the standard CMOS technology humidity sensing properties and CV characteristics of the carbon nitride films have been investigated for fabricating one chip HUSFET(Humidity Sensitive Field Effect Transistor) humidity sensors Carbon nitride films were deposited on silicon substrate with meshed electrodes by reactive RF magnetron sputtering system. The capacitor-type humidity sensor revealed good humidity-impedance characteristics with a wide range of relative humidity changes, decreasing $254k{\Omega}$ to $16k{\Omega}$ according to increase of relative humidity between 5% ~ 95% and the films were very stable on the Si wafer. These results reveal that $CN_x$ thin films can be used for Si based or HUSFET structure one chip micro-humidity sensors.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권3호
• /
• pp.211-216
• /
• 2007

Temporomandibular joint disorders (TMD) often show muscular disorder, internal derangement and degenerative change of articular surface of the condyle. It is important to choose adequate diagnostic method for obtaining data for the diagnosis and treatment. Magnetic Resonance Imaging (MRI) has some advantages, because it shows good resolution image for the soft tissue and it is not invasive to the human body. We have performed serial research about the retrodiscal tissue of the TMJ according to the progress of the disease, using T2 weighted image, since 2002. In this study, we applicated resized observation area to compare signal intensity between the retrodiscal tissue of the TMJ and cerebral gray matter, using T2 weighted image.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제3회 금형가공 심포지엄
• /
• pp.260-265
• /
• 2004

LTCC(Low temperature co-fired ceramic) is being recognized as a significant packaging material of electrical devices for the advantages such as relatively low temperature being needed for process, low conductor resistance and high printing resolution. In the process of LTCC electrical devices, the punched via-hole quality is one of the most important factors on the performance of the device. However, its mechanism is very complicated and optimization of the process seems difficult. In this paper, to clarify the process, via-hole punching experiments were carried out and the punched holes were examined in terms of their burr formation. The effects of thickness of PET sheet and ceramic sheet and punch-to-die clearance on via-hole quality were also discussed. Optimum process conditions are proposed and a factor k is introduced to express effect of the process variables.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1132-1140
• /
• 2009

Recently soil improvement methods are using in many ways such as costal and soft ground of inland. Among them, sand compaction pile be widely used because of quiet few advantages. There are two ways for quality evaluation method of sand compaction pile. Especially standard penetration test is used the most general method. However, Current method have problems in that it is not consider the condition of construction site. Therefore this study is propose new quality evaluation method. Relation of N-$\Phi$ is always not fixed but changing by condition of construction site. By through the Laboratory test we can know relationship between relative density and internal friction. Also this study propose revision for effective stress. From these study, we can acquire more accurate and reasonable result than current method.

• 센서학회지
• /
• 제21권2호
• /
• pp.83-89
• /
• 2012

A simple array of metal-insulator-metal capacitive elements was proposed for a potential application in humidity sensing platforms. We fabricated meso-scale sensors with different sizes(large-size: $2.7{\times}2.7mm^2$ ; mid-size: $1.5{\times}1.5mm^2$ ; small-size: $0.7{\times}0.7mm^2$) and characterized the performance of each design. Polyimide films were utilized as a humidity-sensitive layer. Capacitance changes of the polyimide layer were measured with respect to water absorption. The device showed sensitivity in the full range of relative humidity (RH) with excellent linearity(correlation coefficient > 0.994). This array structure exhibits unique advantages including easy fabrication process, high batch productivity, and high structural compatibility with various substrate materials. It is anticipated that this device structure will be potentially useful in unique applications including mapping spatial humidity variations over a meso-scale area and implementing flexible humidity sensing element arrays.

• 무역학회지
• /
• 제46권2호
• /
• pp.245-262
• /
• 2021

Despite the numerous advantages that CSR engagement can potentially offer, top managers may not always be willing to invest in CSR as they are expected to meet expectations of external constituents in the short run. Given that financial analysts' expectations are important short-term performance targets that top managers are motivated to meet, this study examines how performance relative to earnings forecasts issued by analysts affect top managers' decisions about CSR engagement. Using a sample of publicly listed U.S. firms from 2000 to 2016, we find that top managers are more likely to reduce discretionary expenditure on CSR activities as performance falls below analyst forecasts to improve financial performance in the following fiscal year. As performance exceeds analyst forecasts, top managers are motivated to reduce CSR investments in order to meet higher expectations of analysts. As financial analysts closely monitor the firms that they follow in order to publish investment advice to market participants, we find that analyst coverage weakens top managers' incentive to reduce CSR engagement. Overall, this research sheds meaningful insight into the contextual background in which the top managers are situated in when they make decisions on CSR engagement.

• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.19-26
• /
• 2021

격자 구조체는 강도 및 강성, 초경량 및 에너지 흡수 능력 등의 우수성을 가지고 있어서 전방위 산업에서 주목을 받고 있으나, 다양한 장점에도 불구하고 복잡한 형상에 따른 제조 공정의 어려움으로, 현재까지 광범위한 상용화 및 사용은 제한되고 있다. 한편 적층 제조는 전통적인 제조 방법으로는 불가능한 복잡한 기하학적 형상 제조가 가능한 기술로써, 격자 구조체 제조를 위한 최적 기술로 주목을 받고 있다. 본 연구에서는 3차원 좌표 방법으로 단위 셀을 형성하고, 단위셀의 바운더리 박스 크기 및 스트럿 반경에 따른 상대 밀도의 관계식을 도출하였다. 본 연구에서는 Simple Cubic(SC), Body-Centered Cubic(BCC) 및 Face-Centered Cubic(FCC)을 모델링 소프트웨어를 사용하여 상대 밀도 맞춤형 구조체를 설계하였다. 본 연구에서 제안한 상대 밀도 산출식 정확도는 SC, BCC 및 FCC에서 98.3 %, 98.6 % 및 96.2%의 신뢰성을 확보하였다. 격자 구조체를 대상으로 시뮬레이션 수행 결과, 동일한 셀 배열 조건에서는 상대 밀도가 커짐에 따라 항복 하중이 커지고, 동일 배열 조건에서는 SC, BCC, FCC 순으로 압축 항복 하중이 작아지는 결과가 나타났다. 최종적으로 20 mm × 20 mm × 20 mm 크기의 구조체는 SC 단위 셀을 3×3×3 배열로 구성하는 것이 압축 하중에 대한 구조적 최적화가 가능한 것으로 나타났다.

• 정보화연구
• /
• 제11권4호
• /
• pp.441-448
• /
• 2014

최근 각 산업분야에서 공간정보의 구축은 물론 그 활용과 유통을 위한 다양한 노력들이 이루어지고 있다. 철도산업분야에서도 이러한 공간정보는 각 관련 주체간 협업 등을 원활하게 하고, 자산관리 및 철도운영 등의 효율성을 높일 수 있다. 본 논문에서는 철도공간정보의 체계적인 활용을 위해 철도공간정보에 대한 참조체계 방안을 제시하고자 한다. 현재 철도는 상대위치 개념을 중심으로 모든 시설물 관리와 차량운행이 이루어지고 있다. 상대위치 기반의 관리체계는 많은 장점을 가지고 있으나, 선로 개량 등으로 선형 변화가 발생할 경우 변경된 지점을 중심으로 그 다음 위치들은 모두 상대위치를 변경하여야만 하는 어려움 또한 유발된다. 그리고 토목, 전기, 신호 등 철도의 각 분야에 속한 시설물들은 각각 다른 상대위치를 가지고 있기 때문에 협업의 어려움 또한 발생하고 있다. 이러한 문제점을 해결하고, 철도산업 이외의 분야와 협업 및 정보 융복합 등을 위하여 절대위치 기반의 철도공간정보참조체계가 필수적이다. 이에 본 연구에서는 세계적으로 유일한 객체식별자를 가지는 OID표준을 기반으로 철도공간정보참조체계 식별자 ROID(Railway Object IDentifier)와 시스템 확장성 및 연계성이 높은 서비스 객체지향형 철도공간정보참조체계를 제안한다. ROID는 기존의 철도 시설물 관리체계를 유지하면서 절대위치와 함께 유일한 식별자 개념을 가질 수 있도록 구성된다.

• 한국항공우주학회지
• /
• 제38권3호
• /
• pp.221-227
• /
• 2010

일반적인 전술유도탄에서 표적획득 센서로 사용되는 김발형 탐색기(Gimballed Seeker) 는 탐색기의 표적획득부가 유도탄의 동체운동과는 독립적으로 관성좌표계 상에서 표적을 지향하게 하여 비례항법 유도명령 생성에 필요한 유도탄/표적간의 시선 각속도 정보를 직접 제공한다. 반면 최근에는 탐색기 전체가 유도탄 동체에 고정됨으로써 정비보수 용이, 고장수리 감소, 단가감소 측면 등에서 유리한 동체고정 탐색기(Strapdown Seeker)에 대한 연구가 부분적으로 수행되고 있다. 그런데 동체고정 탐색기에서는 비례항법에 필요한 시선각속도가 직접주어지지 않고 탐색기 영상 평면에 맺힌 표적영상으로부터 유도명령생성에 필요한 정보를 추출하여야 한다. 본 연구에서는 먼저 스트랩다운 탐색기로부터 주어지는 표적정보를 바탕으로 언센티드 칼만필터(Unscented Kalman Filter, UKF)를 적용하여 유도탄과 표적간의 상대운동을 추정한다. 추정된 상대운동 정보를 이용하여 유도명령을 생성하고 유도탄과 표적간의 조우운동을 시뮬레이션을 통하여 검증하였다.

• 한국해양공학회지
• /
• 제29권2호
• /
• pp.191-198
• /
• 2015

In this study, we proposed a new type of dual-buoy wave energy converter (WEC) exploiting multi-resonance and analyzed the experimental results from a model test in a 2-D wave flume. A dual-buoy WEC using multi-resonance has two advantages: high efficiency at the resonant frequencies and the potential to extend the frequency range available to extract wave power from the WEC. The suggested WEC was composed of an outer buoy and an inner buoy sliding vertically inside the outer buoy. As the power take-off device, a linear electric generator (LEG) consisting of permanent magnets and coils fixed at each buoy was adopted. Electricity was produced by the relative heave motion between the two buoys. To search for the optimal shape of a dual-buoy WEC, we conducted experiments on the heave motion of a two-body system in regular waves without an LEG installed. Model tests with six combinations of experimental models were conducted in order to find the motion characteristics of a dual-buoy WEC. It was found that model 2, which included a ring-shaped appendage to move the resonant frequency of the outer buoy toward a high value, showed a higher relative heave response amplitude operator (RAO) curve than model 1. In addition, the double-peak shape of the heave RAO curve shown for model 2 indicated the extension of the frequency range for extracting wave power in irregular waves.