• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.255-260
• /
• 2011

The train control system is a facility to ensure safe train operation, and its safety is the most important factor for system introduction. Therefore, in order to improve practical usability in the business, safety analysis and evaluation of train control system and train control related core technologies are needed. Korea Railroad Research Institute has carried out standard development of radio-based train control system as a government research and development project. In this paper, we present a system specification of ATP, a core part of train control system, for standard system of Korean radio-based train control system(KRTCS). The paper present a operation environment and primary ATP functions, and functional requirement specifications.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.27-37
• /
• 2011

Currently, in the course of introducing rolling stocks, RAMS standard and management by system engineering method apply to rolling stock system. Technical elements and results applied in system introduction phase are just used in acquisition stage, and these are not applied to the standard in railway site. Therefore, it is difficult to apply to standardized technology and quality assurance measure. Due to the establishment of the EU, railway operation system is internationalized and the international railway standards are being discussed in various ways. In addition, standardization is expanded from manufacture to operation and maintenance. It is to provide consistent standard in quality, cost calculation of maintenance technology, maintenance technology and quality assurance in case of international railway safety incidents. Therefore, this study is to find technology, quality and cost management model to be used for choosing railway-operation guidance by considering how technologies & quality have changed in system life cycle, compared with estimated standards, based on the technologies & quality-related result in the process of getting new rolling stocks and management guidance for operation & maintenance process.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.2
• /
• pp.86-91
• /
• 2012

A conductor has been produced according to IEC standard and low voltage electrical facility has been installed according to IEC 60364. So we must comply with international standard for design, construction and inspection. But because of many related and varied standards, it is difficult to apply to design and inspect for electrical equipment. We researched the necessity of design guide which is detailed and systematization from survey. For detailed design guide, we suggest calculation method of protective conductor cross-sectional area at TN-S system according to BS 7671 regulation and KS C IEC 60364 standard.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.13 no.2
• /
• pp.182-187
• /
• 2000

Current status and quality administration of botanical products in America which has one of the biggest market need to be analyzed for the internationalization of oriental medicine. In this study, current status of botanical products as dietary supplements was analyzed and quality adminstration by United States Pharmacopoeia and National Formulary(USP-NF) was compared with The Korea Pharmacopoeia and botanical drug standard collection(KP), Even though the number of botanical products in USP-NF is small, it is rapidly increasing and more detailed compared with KP. Especially, reference standard compound should be determined for each botanical drugs, and more detailed standard for other items should be established in KP considering international trends. Though the history of botanical drugs in America is short, its annual market is about 3.2 billion dollar, so American administration system should be examined carefully for the internationalization of oriental medicine and related industry.

• IE interfaces
• /
• v.23 no.3
• /
• pp.213-220
• /
• 2010

As the market becomes increasingly globalized and competition among companies increases in severity, various specialized organizations are participating across the process plant lifecycle, including the stages of design, construction, operation and maintenance, and dismantlement, in order to ensure efficiency and elevate competitiveness. In this regard, it is an important technical issue to develop services or information systems for sharing process plant data among participating organizations. ISO 15926 is an international standard for integration of lifecycle data for process plants including oil and gas facilities. ISO 15926 Part 7, a part of the ISO 15926 standard, specifies an implementation method called a facade that uses Web Services and ontology technologies for constructing plant data repositories and related services, with the aim of sharing lifecycle data of process plants. This paper discusses the ISO 15926-based prototype facade implemented for storing equipment data of nuclear power plants and servicing the data to interested organizations.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2561-2567
• /
• 2018

The extension of DC battery backup time in the DC power supply system of nuclear power plants (NPPs) remains a challenge. The lead-acid battery is the most popular at present. And it is generally the most popular energy storage device. However, extension of backup time requires too much space. The lithium-ion battery has high energy density and advanced gravimetric and volumetric properties. The aim of this paper is development of the sizing formula of stationary lithium-ion batteries. The ongoing research activities and related industrial standards for stationary lithium-ion batteries are reviewed. Then, the lithium-ion battery sizing calculation formular is proposed for the establishment of industrial design standard which is essential for the design of stationary batteries of nuclear power plants. An example of calculating the lithium-ion battery capacity for a medium voltage UPS is presented.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.3
• /
• pp.231-245
• /
• 2002

A better knowledge of emission inventories can serve several important functions such as provision of public information, identification of primary sources, assessment of temporal and spatial trend, and analysis for national modelling studies. The purpose of this paper is to propose the new air emission source categories on the basis of the Korea Standard Industrial Classification. Hence, the paper focuses on reviewing and comparing the air emission sources categories of USEPA, and EU. The new emission source categories compose Tiers 1, 2, and 3. For Tier 1, there are 14 categories; fuel combustion-utilities, industries, and heating and others, chemical and allied product manufacturing, metals processing, and petroleum and related industries, etc. Tier 2 consists of small categories classified minutely in Tier 1. Tier 3 connects the categories of Tier 2 with the Korea Standard Industrial Classification.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 1998.05a
• /
• pp.22-22
• /
• 1998

This paper reviews the benefits of users participation in IMT-2000 standardization by the creation of users coalitions, focusing in particular on phased standards strategy necessary for the evolutionary approach from second generation to third generation systems. It first presents in detail the current status of IMT-2000 standardization progress occurring at each regional standard body including TIA of US, ETSI of Europe, TTA of Korea and ARIB of Japan. With this clear understanding of standardization situations worldwide, we may be able to come up with our standards strategies related to IPR issues and efficient standard-setting mechanism between manufacturers and service providers. In addition, this paper addresses the necessity for phased licensing of IMT-2000 service in order to avoid the high cost of new infrastructures and ensure an acceptable financial investment returns for existing cellular and PCS service providers. An author hopes that this paper can provide the adequate standardization directions of IMT-2000 to satisfy the varying regional and global market requirements.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.6
• /
• pp.53-58
• /
• 2012

A conductor has been produced according to IEC standard and low voltage electrical facility has been installed according to IEC 60364. But because of many related and varied standards, it is difficult to apply to design and inspect for electrical equipment. We researched the necessity of design guide which is detailed and systematization from survey. For detailed design guide, we suggest application method and review items at calculations for voltage drop calculations on low voltage feeder by IEC 60364, BS 7671 standard and Consumer's Electrical Installation Guide.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.8
• /
• pp.18-26
• /
• 2012

Recently, there have been suggestions that power factor should be considered to increase the efficiency of electric power supply when evaluating the performance of the electric appliances in standby mode and the related studies have been conducted to improve the efficiency standard of standby power. But, they lack the analysis of the standby power characteristics with the changes of power factor. This study is conducted to analyze the standby power characteristics of TV which is a typical home appliance and reaches a conclusion that the apparent power can be a more reasonable index which reflects the efficiency of electric power supply. It is also found that LED TVs show the best performance in standby mode. Moreover, an example to set standby power standards on TVs to be applied in the future is suggested, considering the energy efficiency policies for appliances.