• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5C
• /
• pp.199-206
• /
• 2009

This paper presents full scale model tests on the various types of model piles carried out to estimate the behavior of laterally loaded steel-concrete composite piles. Subgrade-reaction spring system was developed to simulate the reaction of ground in laboratory condition. In addition, lateral behavior of piles under working load condition was estimated using composite loading system, which is available for independent loading in vertical and horizontal direction. Steel-concrete composite piles showed higher efficiency in lateral resistance rather than drilled shaft made of reinforced concrete. The lateral resistance of composite pile was larger than the summation of steel pile and concrete pile due to the composite effect by steel casing. The effect of shear key or strength of concrete on the behavior of composite pile was examined. The substitution of reinforcing bar by steel casing was also investigated.

• The Plant Pathology Journal
• /
• v.39 no.4
• /
• pp.397-408
• /
• 2023

Fire blight disease, caused by Erwinia amylovora, is a devastating affliction in apple cultivation worldwide. Chemical pesticides have exhibited limited effectiveness in controlling the disease, and biological control options for treating fruit trees are limited. Therefore, a relatively large-scale survey is necessary to develop microbial agents for apple trees. Here we collected healthy apple trees from across the country to identify common and core bacterial taxa. We analyzed the endophytic bacterial communities in leaves and twigs and discovered that the twig bacterial communities were more conserved than those in the leaves, regardless of the origin of the sample. This finding indicates that specific endophytic taxa are consistently present in healthy apple trees and may be involved in vital functions such as disease prevention and growth. Furthermore, we compared the community metabolite pathway expression rates of these endophyte communities with those of E. amylovora infected apple trees and discovered that the endophyte communities in healthy apple trees not only had similar community structures but also similar metabolite pathway expression rates. Additionally, Pseudomonas and Methylobacterium-Methylorobrum were the dominant taxa in all healthy apple trees. Our findings provide valuable insights into the potential roles of endophytes in healthy apple trees and inform the development of strategies for enhancing apple growth and resilience. Moreover, the similarity in cluster structure and pathway analysis between healthy orchards was mutually reinforcing, demonstrating the power of microbiome analysis as a tool for identifying factors that contribute to plant health.

• Journal of Leisure Studies
• /
• v.6 no.3
• /
• pp.39-56
• /
• 2009

With the main player of international competition being changed from country to region/city, city competitiveness is emerging as driving forces of industrial and national competitiveness and organizations formed on a city level are regarded as the main unit of competition among nations. This paper's goal is to research upon the city competitiveness with an emphasis on the analytical tool applying IPS Model of city competitiveness to 75 Korean cities and to map out the strategies to enhance the Chuncheon city's competitiveness based on the results of the evaluation on Chuncheon city's current and future competitiveness with focus on the impact of the city's hosting World Leisure Congress and World Leisure Games in 2010. By discussing city's future competitiveness as well as its current strength at the same time, the more comprehensive perspective required in reinforcing city competitiveness is proposed in this paper and issues related to a city's context and policy can be evaluated and their solutions can be sought after. The study can also contribute to the establishment of city's development policies and detect sustainable growth power for individual cities.

• Korean Journal of Social Welfare Studies
• /
• v.42 no.2
• /
• pp.41-70
• /
• 2011

This research is to study the interaction of multiculture parents in law between. daughter in law. We approached hermeneutical grounded theory and six of multiculture family's parent's in law participated this research. Data were collected by the depth interview and various written records and we could construct 9 hermeutical theme by analyzing and categorizing 83 meaning units, 22 categories. We descripted the process of acculturation between parent's in law and daughter in law. The result as follows : ① sticking self dimensions → ② strategic acceptomce → ③ making shade of co-existence → ④ self dismantling and reconstruction. Finally we proposed the 「joint program of parent's in law and daughter in law for reinforcing culture unpetence」.

• Korean Journal of Legislative Studies
• /
• v.27 no.2
• /
• pp.111-143
• /
• 2021

It is necessary to analyze the budget power during the budget process of the local council, paying attention to strengthening the capacity of local council and reinforcing expertise to secure accountability. The budget power of council is expressed in various terms such as power of the purse and the authority to control the budget, and focuses on the role of control and check in the council's budget process. The purpose of this study is to analyze the factors that political·administrative variables, social·economical variables affect the budget power of local council. The budget power of councils was set as the budget net modification rate and the period for processing the budget bill at the plenary session. And the effects of various variables were checked. As a result, the local council confirmed that there was a lack of checks and controls in the budget process.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.157-166
• /
• 2020

Automated rebar fabrication, which requires effective information exchange between model designers and fabricators, has brought the integration and interoperability of data from different sources to the notice of both academics and industry practitioners. Industry Foundation Classes (IFC) was one of the most commonly used data formats to represent the semantic information of prefabricated components in buildings, whereas the data format utilized by rebar fabrication machine is BundesVereinigung der Bausoftware (BVBS), which is a numerical data structure exchanging reinforcement information through ASCII encoded files. Seamless transformation between IFC and BVBS empowers the automated rebar fabrication and improve the construction productivity. In order to improve data interoperability between IFC and BVBS, this study presents an IFC extension based on the attributes required by automated rebar fabrication machines with the help of Information Delivery Manual (IDM) and Model View Definition (MVD). IDM is applied to describe and display the information needed for the design, construction and operation of projects, whereas MVD is a subset of IFC schema used to describe the automated rebar fabrication workflow. Firstly, with a rich pool of vocabularies practitioners, OmniClass is used in information exchange between IFC and BVBS, providing a hierarchy classification structure for reinforcing elements. Then, using International Framework for Dictionaries (IFD), the usage of each attribute is defined in a more consistent manner to assist the data mapping process. Besides, in order to address missing information within automated fabrication process, a schematic data mapping diagram has been made to deliver IFC information from BIM models to BVBS format for better data interoperability among different software agents. A case study based on the data mapping will be presented to demonstrate the proposed IFC extension and how it could assist/facilitate the information management.

• Journal of the Daesoon Academy of Sciences
• /
• v.22
• /
• pp.539-565
• /
• 2014

This paper provides the meaning of sacred places and pilgrimages in Daesoonjinrihoe, the most representative of the new religions in Korea. Daesoonjinrihoe stipulates Dojang(道場, it means temple complex) as the sacred places, which presently functions as the center of their religious faith. Also, The Daesoonjinrihoe devotees worship 15 deities at a sacred place, Yeongdae(靈臺). By seeing meanings of sacred places and pilgrimage in Daesoonjinrihoe, This article focuses on the process of the sacrificial rite of Daesoonjinrihoe related to the importance of religious ritual or place of faith and sacred places as pilgrimage sites. At this time, I explain the properties of sacrificial rite of it. The sacrificial rite of Daesoonjinrihoe, one of its major rites, is performed at both regular and irregular intervals. It is performed by either an individual or a group at a fixed time and place. The study of sacred places should focus not only artificial structures such as buildings but also the meanings given to them and the mechanism that created these meanings. Pilgrimage is journey undertaken by person who consider their destination sacred. By seeing meaning of pilgrimage, this paper focus on Daesoonjinrihoe' role in making a place pilgrimage sites and pilgrimage functions. The reason I focus on sacred places and pilgrimage in Daesoonjinrihoe is that these sacred places reflect people's attempt to invent religious memory and identity. Thus, I elucidate the role that Daesoonjinrihoe's sacred places and pilgrimage plays in remembering religious memory. I examine the messages that Daesoonjinrihoe's sacred places intend to convey to the followers through the created sacred places and pilgrimage. Sacred places are significant because it reflect important symbolic features of religion. Sacred places and pilgrimage are vehicles for remembering the religious memory and reinforcing various memories. Finally, Handing down of our valuable Daesoonjinrihoe's cultural heritage is our duty. So it is necessary to make an effort to conserve Daesoonjinrihoe's cultural heritage such as sacred places and concentration upon our interest continuously.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.529-534
• /
• 2023

Although line printing technology is capable of high-speed and large area printing, residual stresses generated during the manufacturing process can deform the feedhole, causing nozzle plate crack or ink leaks. Therefore, in this paper, we propose a new thermal inkjet print head that is robust, reliable and more suitable for line-printing. The amount of deformation of the conventional line printing head measured through the experiment was converted into an equivalent load, and the validity of the load estimation method was verified through FEA analysis. In addition, in order to minimize deformation without increasing the head size, the head structure was designed to increase internal rigidity by reinforcing the unit nozzle with a pillar or support wall or by adding a support beam or dry/wet etched bridge. The FEA analysis results show that the feedhole deformation was reduced by up to 90%, and it is confirmed that the suggested print head with dry etched feedhole bridge operates normally without nozzle plate cracks and ink leakage through fabrication.

• Steel and Composite Structures
• /
• v.48 no.1
• /
• pp.1-17
• /
• 2023

The main goal of this paper is to study vibration of damaged core laminated sectorial plates with Functionally graded (FG) face sheets based on three-dimensional theory of elasticity. The structures are made of a damaged isotropic core and two external face sheets. These skins are strengthened at the nanoscale level by randomly oriented Carbon nanotubes (CNTs) and are reinforced at the microscale stage by oriented straight fibers. These reinforcing phases are included in a polymer matrix and a three-phase approach based on the Eshelby-Mori-Tanaka scheme and on the Halpin-Tsai approach, which is developed to compute the overall mechanical properties of the composite material. Three complicated equations of motion for the sectorial plates under consideration are semi-analytically solved by using 2-D differential quadrature method. Using the 2-D differential quadrature method in the r- and z-directions, allows one to deal with sandwich annular sector plate with arbitrary thickness distribution of material properties and also to implement the effects of different boundary conditions of the structure efficiently and in an exact manner. The fast rate of convergence and accuracy of the method are investigated through the different solved examples. The sandwich annular sector plate is assumed to be simply supported in the radial edges while any arbitrary boundary conditions are applied to the other two circular edges including simply supported, clamped and free. Several parametric analyses are carried out to investigate the mechanical behavior of these multi-layered structures depending on the damage features, through-the-thickness distribution and boundary conditions.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_3
• /
• pp.1297-1303
• /
• 2023

Research on enhancing the mechanical strength, lightweight properties, electrical conductivity, and thermal conductivity of composite materials by incorporating nano-materials is actively underway. Thermoplastic resins can change their form under heat, making them highly processable and recyclable. In this study, Polyamide-Nylon 6 (PA6), a thermoplastic resin, was utilized, and as reinforcing agents, fused carbon nano-materials (FCN) formed by structurally combining Carbon Nanotube(CNT) and Graphene were employed. Nano-materials often face challenges related to cohesion and dispersion. To address this issue, Silane functional groups were introduced to enhance the dispersion of FCN in PA6. The manufacturing conditions for the composite materials involved determining the use of a dispersant and varying FCN content at 0.05 wt%, 0.1 wt%, and 0.2 wt%. Tensile strength measurements were conducted, and FE-SEM analysis was performed on fracture surfaces. As a result of the tensile strength test, it was confirmed that compared to pure PA6, the strength of the polymer composite with a content of 0.05 wt% was improved by about 60%, for 0.1 wt%, about 65%, and for 0.2 wt%, the strength was improved by 50%. Also, when compared according to the content of FCN, the best strength value was shown when 0.1 wt% was added. The elastic modulus also showed an improvement of about 15% in the case of surface treatment compared to the case without surface treatment, and an improvement of about 70% compared to pure PA6. Through FE-SEM, it was confirmed that the matrix material and silane-modified nanomaterial improved the dispersibility and bonding strength of the interface, helping to support the load evenly and enabling effective stress transfer.