• Structural Engineering and Mechanics
• /
• 제30권6호
• /
• pp.733-761
• /
• 2008

The failure of reinforced concrete structures in recent earthquakes caused concern about the performance of beam column joints. Confinement of joint is one of the ways to improve the performance of beam column joints during earthquakes. This paper describes an experimental study of exterior beam-column joints with two non-conventional reinforcement arrangements. One exterior beam-column joint of a six story building in seismic zone III of India was designed for earthquake loading. The transverse reinforcement of the joint assemblages were detailed as per IS 13920:1993 and IS 456:2000 respectively. The proposed nonconventional reinforcement was provided in the form of diagonal reinforcement on the faces of the joint, as a replacement of stirrups in the joint region for joints detailed as per IS 13920 and as additional reinforcement for joints detailed as per IS 456. These newly proposed detailing have the basic advantage of reducing the reinforcement congestion at the joint region. In order to study and compare the performance of joint with different detailing, four types of one-third scale specimens were cast (two numbers in each type). The main objective of the present study is to investigate the effectiveness of the proposed reinforcement detailing. All the specimens were tested under reverse cyclic loading, with appropriate axial load. From the test results, it was found that the beam-column joint having confining reinforcement as per IS: 456 with nonconventional detailing performed well. Test results indicate that the non-conventionally detailed specimens, Type 2 and Type 4 have an improvement in average ductility of 16% and 119% than their conventionally detailed counter parts (Type1 and Type 3). Further, the joint shear capacity of the Type 2 and Type 4 specimens are improved by 8.4% and 15.6% than the corresponding specimens of Type 1 and Type 3 respectively. The present study proposes a closed form expression to compute the yield and ultimate load of the system. This is accomplished using the theory of statics and the failure pattern observed during testing. Good correlation is found between the theoretical and experimental results.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권6호
• /
• pp.1-8
• /
• 2012

이 연구는 횡보강근의 배근형상에 따른 횡구속된 콘크리트의 성능을 평가하였다. 주요 변수는 횡보강근의 항복강도와 횡보강근의 배근형상으로 하였다. 총 27개의 직사각형 형태의 실험체를 제작하였으며, 단조 집중하중상태에서 실험을 수행하였다. 이 연구에서는 배근형상을 사각형인 R-type, 원형인 C-type 및 이 연구에서 제안한 사각과 팔각이 혼합된 O-type으로 계획하였다. 실험결과, 이 연구에서 제안한 배근형상이 사각형 나선철근과 비교하여 뛰어난 연성능력을 가짐을 확인할 수 있었다.

• 한국지반환경공학회 논문집
• /
• 제20권8호
• /
• pp.13-20
• /
• 2019

지반보강을 위해 국내에서 널리 사용되고 있는 공법으로 약액주입공법, 앵커공법, 소일네일공법 및 마이크로파일공법 등을 들 수 있다. 이러한 지반보강공법은 보강재의 종류, 설치방법, 프리스트레스의 유무 및 그라우팅 방법에 따라 다양한 공법으로 개발되고 있으나, 공통적으로 지반보강재의 강성, 그라우트와 보강재의 마찰력 및 그라우트와 지반의 마찰력이 주요 설계변수이다. 따라서, 최적화된 지반보강재는 보강재 자체의 인장강도가 큰 재료로써 보강재와 그라우트사이의 마찰력이 크며, 그라우트와 지반사이의 마찰력을 향상시킬 수 있는 최적의 그라우팅 방법의 적용이 필요하다. 이에, 본 연구에서는 보강재의 형상과 그라우팅 방법에 따른 보강효과를 평가하고자 총 20여개의 실내모형실험을 실시하였으며, 실험결과 타공+날개보강형과 포스트그라우팅 방법이 보강 효과가 가장 우수한 것으로 나타났다.

• 복식문화연구
• /
• 제19권3호
• /
• pp.473-487
• /
• 2011

The purpose of this study is to analyze the body type and fashion of posthuman in SF movies. The method of this study was to analyze documentaries, internet web site, fashion books and so forth. The results were as follows: The body types of posthuman were expressed as mutation type, prosthetic type, clone type by biological hybrid or renovation and digital type by computer simulation. The mutation type was expressed as reinforcement of masculinity or feminity and reinforcement of body functions. The fashion item was expressed as a black tailored suit, leather jacket, cat suit, whip, black sunglass, garter belt, high heel shoes, short pants, black one piece dress and functional body suit. The prosthetic type was expressed as reinforcement of body functions and reinforcement of masculinity or feminity. The fashion item was expressed as a military item, high-tech power suit and ergonomic armor suit. The clone type was expressed as the plural ego with reinforcement of body functions. The fashion item was expressed as a power shoulder jacket, fake fur coat, vinyl, black see-through look and functional suit. The digital type was expressed as reinforcement of masculinity or feminity and the plural ego with reinforcement of body functions. The fashion item was expressed as a data suit, leather jacket, black over coat, boots, black sun glass, ethnic items and military items. The meanings of posthuman fashion in SF movies were impurity of posthuman, display of superhuman's power by sexuality, metaphor of power and fantasy of superhero in opposition futuristic dystopia. As mentioned above, posthuman body type and fashion in SF movies become the conversational topic in the real world. The fact that we think about utopia and identity of posthuman in the future is of great significance.

• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.91-98
• /
• 2020

Purpose: This study is to compare the flexural strength and modulus by inserting a mesh and stick type fiberglass reinforcement into resin specimens. Methods: Wax specimens (length 64 mm, width 39 mm, thickness 5 mm) are prepared according to ISO 20795-1:2013. Mesh type and stick type glass fiber reinforcements were prepared. The prepared wax specimens were used plaster and flask for investment. The flask was separated and the wax was removed. The heat curing resin was injected into the flask, and then a mesh type and stick type fiberglass reinforcement were inserted. The prepared resin specimen was cut into three equal parts (length 64 mm, width 10 mm, thickness 3.3 mm). The mesh type glass fiber reinforcement (MT group) and the stick type glass fiber reinforcement (ST group) were classified into two groups. The prepared specimen was measured using a universal testing machine (UTM). The data were analyzed by Mann-Whitney U test, and the significance level was set to 0.05. Results: In the flexural strength, the ST group was higher than the MT group, and there was a significant difference between the two groups (p<0.05). In the flexural modulus, the ST group was higher than the MT group, and there was a significant difference between the two groups (p<0.05). Conclusion: The stick-type glass fiber inreased the flexural strength than the mesh-type glass fiber reinforcement.

• Advances in concrete construction
• /
• 제14권2호
• /
• pp.79-92
• /
• 2022

The amount and configuration of transverse reinforcement are known as critical parameters that significantly affect the lateral confinement of concrete, the ductility capacity, and the plastic hinge length of RC columns. Based on test results, this study investigated the effect of the three variables on structural indexes such as neutral axis depth, lateral expansion of concrete, and ductility capacity. Five reinforced concrete column specimens were tested under cyclic flexure and shear while simultaneously subjected to a constant axial load. The columns were reinforced by two types of reinforcing steel: rectangular hoops and spiral type reinforcing bars. The variables in the test program were the shape, diameter, and yield strength of transverse reinforcement. The interactive influence of the amount of transverse reinforcement on the structural indexes was evaluated. Test results showed that when amounts of transverse reinforcement were similar, and yield strength of transverse reinforcement was 600 MPa or less, the neutral axis depth of a column with spiral type reinforcing bars was reduced by 28% compared with that of a column reinforced by existing rectangular hoops at peak strength. While the diagonal elements of spiral-type reinforcing bars significantly contributed to the lateral confinement of concrete, the strain of diagonal elements decreased with increases of their yield strength. It was confirmed that shapes of transverse reinforcement significantly affected the lateral confinement of concrete adjacent to plastic hinges. Transverse reinforcement with a yield strength exceeding 600 MPa, however, increased the neutral axis depth of normal-strength concrete columns at peak strength, resulting in reductions in ductility and energy dissipation capacity.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.201-210
• /
• 1999

An experimental study was carried out to determine pullout behavior of a new type of anchor bolt that used deformed reinforcement and a commercial adhesive. Concrete slabs and columns with about 20-MPa compressive strength were used for 136 pullout tests performed. Test variables included anchor diameter (10 mm ~ 32 mm). embedment depth (10$\Phi$ or 15$\Phi$), edge effect. and Presence of transverse reinforcement in existing concrete. In Tyre-S test. where the edge or reinforcing steel effect was not included, the anchor Pullout strengths increased with increasing anchor diameters. Anchors with 15$\Phi$ embedment depth had higher Pullout strengths than those with 100 embedment depth The largest average Pullout load of 208 kN was determined for anchors made with D25 reinforcement and with 15$\Phi$ embedment depth. In Type-E tests, where the anchors were installed close to the edge of existing concrete, there were reductions in pullout strengths when compared to those determined in Type-S tests. In Type-ER tests, influence of the reinforcement in existing concrete on the anchor pullout strengths was examined using reinforced concrete and plain concrete columns Test results indicated that existing transverse reinforcement (column ties) did not help increase the pullout strength. The overall pullout test results revealed that the new anchor bolt can develop large pullout strengths while the anchors can be made of materials that are readily available in the market.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.350-358
• /
• 2009

To enhance the application of the reinforced retaining walls in the railway industry, this paper suggested a type of reinforcement subgrade with short reinforcement and rigid facing. To become popular the reinforced retaining walls in the industry, the deformation of retaining walls should be controlled below some limited level. In this paper, small scale and full scale tests of the proposed retaining walls were performed and their deformation characteristics were evaluated. Even though it has short reinforcement, the rigid type retaining wall had small deformation to the external train loading than the segmental type retaining wall had.

• 한국터널지하공간학회 논문집
• /
• 제20권3호
• /
• pp.625-639
• /
• 2018

본 연구는 터널 갱구부의 복잡하고 다양한 지형조건과 공학적인 강도특성이 불량한 토사 및 풍화암이 깊은 심도로 분포하는 조건에 대하여 터널 굴착 중 안정성확보를 위하여 보강되는 보조공법의 보강방법에 관한 논문이다. 기존 터널 갱구부 보조공법(강관보강 그라우팅, Ø60.5 mm, Ø114.3 mm)은 장심도 수평시공이 곤란하여 중첩보강 조건으로 시공되고 있다. 근래, 고강성의 대구경 강관 및 수평방향 장심도(L = 30.0~50.0 m) 시공기술이 개발됨에 따라, 터널 갱구부의 지층 및 지반조건에서 보조공법의 보강방법에 대한 공학적인 검토를 수행하여 효과적인 보강방법의 평가가 필요한 상황이다. 따라서 터널 보조공법 무보강 조건, 기존 중첩보강 조건 및 수평보강 조건과 터널 갱구부의 지반조건을 매개변수로 하여 3차원 연속체 수치해석(Midas GTS NX 3D)을 수행하여 보강효과를 검토한 결과, 보조공법 수평보강조건이 변위(천단침하 및 내공변위) 및 지보재 응력이 가장 작게 발생됨에 따라, 보강효과가 가장 큰 것으로 검토되었다. 본 연구 결과를 토대로, 터널 갱구부 현장에 장심도 대구경 강관 수평보강 그라우팅을 설계 및 시공한 결과, 터널 갱구부 변위 및 지보재 응력은 허용값 이내에서 발생되어 충분한 안정성이 확보되는 것으로 검토되었다. 또한, 터널 갱구부의 지반굴착을 최소화함에 따라, 친환경적인 터널 갱구부 형성이 가능한 것으로 파악되었다.

• 토지주택연구
• /
• 제4권4호
• /
• pp.371-382
• /
• 2013

불균형 모멘트가 작용하는 무량판 슬래브 내부접합부를 대상으로 폐쇄형 전단보강근으로 보강한 1개 실험체와 밴드형 전단보강근으로 전단보강한 2개의 실험체를 제작하여 구조성능을 평가하였다. 구조성능평가 결과, 구조설계기준(KBC 2009)으로 평가한 불균형모멘트는 실험결과의 95%로 매우 잘 일치하나, 개정 구조설계기준(KCI 2012)으로 산정한 불균형모멘트는 실험결과의 약 60%에 불과하여, 내부접합부의 불균형모멘트를 과대평가하는 것으로 나타났다. 밴드형 전단보강근은 기존 전단보강근과 비교하여 유사한 구조성능을 가지며, 시공성이 우수한 것으로 나타나 중진지역의 무량판구조물 설계 시 적용할 수 있는 것으로 평가되었다.