• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.897-902
• /
• 2001

Recently, structure performance is maximized by using high strength concrete. In design of structure, concrete need combination with reinforcement, but use of common strength reinforcement make member complex bar placement, so high strength concrete members require increased strength reinforcement. If common strength reinforcement replaced by equal tension area of high strength reinforcement, reinforcement ratio increase and brittle failure of member may occur by material change. So, adequate upper limit of strength ratio is required to affirm ductile behavior in application of high strength reinforcement. In this study, ductility behavior was analysed by factor of reinforcement ratio, strength of concrete and reinforcement. The result indicate that ductile failure is shown under 0.35 $\rho_{b}$ in any reinforcement strength of same section and high strength concrete of 800kg/$cm^{2}$ used commonly is compatible with reinforcement of 5500kg/$cm^{2}$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.81-84
• /
• 2008

The purposes of this study are to verify a reasonable model of material characteristic and to propose a rational model of reinforcement characteristic considering monotonic and cyclic loading about manufactured reinforcing steel in Korea. Longitudinal reinforcements of the plastic hinge region were behaved tensile deformation and compressional deformation by direction of lateral loading. However Confinement steels were behaved only tensile deformation by lateral loading. Transverse steels were laid the state of tension in the lateral loading of time, and they were laid state that stress is zero when it was removed lateral load. The tests for cyclic tension loading were performed for test variable as yield strength and reinforcement bar sizes. It was estimated that the total strain energy per unit volume was 74 $MJ/m^3$. The modified ultimate concrete compression strain model was proposed based on experimental study of cyclic tension test for manufactured reinforcing steel in Korea.

• Structural Engineering and Mechanics
• /
• 제17권6호
• /
• pp.863-878
• /
• 2004

Steel corrosion in reinforced concrete structures leads to concrete cover cracking, reduction of bond strength, and reduction of steel cross section. Among theses consequences mentioned, reduction of bond strength between reinforcement and concrete is of great importance to study the behaviour of RC members with corroded reinforcement. In this paper, firstly, an analytical model based on smeared cracking and average stress-strain relationship of concrete in tension is proposed to evaluate the maximum bursting pressure development in the cover concrete for noncorroded bar. Secondly, the internal pressure caused by the expansion of the corrosion products is evaluated by treating the cracked concrete as an orthotropic material. Finally, bond strength for corroded reinforcing bar is calculated and compared with test results.

• Advances in concrete construction
• /
• 제1권1호
• /
• pp.103-119
• /
• 2013

The applicability of limit analysis methods in design and assessment of concrete structures generally requires a certain plastic deformation capacity. The latter is primarily provided by the ductility of the reinforcement, being additionally affected by the bond properties between reinforcing steel and concrete since they provoke strain localization in the reinforcement at cracks. The bond strength of reinforcing bars is not only governed by concrete quality, but also by construction details such as bar ribbing, bar spacing or concrete cover thickness. For new concrete structures, a potentially unfavorable impact on bond strength can easily be anticipated through appropriate code rules on construction details. In existing structures, these requirements may not be necessarily satisfied, consequently requiring additional considerations. This two-part paper investigates in a theoretical study the impacts of the most frequently encountered construction details which may not satisfy design code requirements on bond strength, steel strain localization and plastic deformation capacity of cracked structural concrete. The first part introduces basic considerations on bond, strain localization and plastic deformation capacity as well as the fundamentals of the Tension Chord Model underlying the further investigations. It also analyzes the impacts of the hardening behavior of reinforcing steel and concrete quality. The second part discusses the impacts of construction details (bar ribbing, bar spacing, and concrete cover thickness) and of additional structure-specific features such as bar diameter and crack spacing.

• 콘크리트학회논문집
• /
• 제22권6호
• /
• pp.859-866
• /
• 2010

콘크리트의 취성적인 인장 거동을 보완하기 위해 섬유를 혼입한 섬유보강 콘크리트에 대한 연구가 진행되어 왔으며, 그 중 인장균열 이후 변형 경화 거동(strain hardening behavior)을 보이는 고인성 섬유보강 콘크리트(HPFRCC)에 대하여 활발히 연구되고 있다. 하지만, 철근이 없는 HPFRCC의 인장 및 휨거동에 대해 주로 연구가 계속되어온 반면 철근이 배근된 HPFRCC 부재의 인장 거동에 대한 자료는 미흡한 실정이다. 따라서 이 연구에서는 HPFRCC의 인장거동에 대한 철근의 효과를 분석하기 위해 철근이 배근된 HPFRCC 부재를 제작하여 인장 강성(tension stiffening)에 대한 실험을 수행하였고, 인장 강성 실험 결과에서 HPFRCC의 인장 응력-변형률 관계를 도출하였다. HPFRCC는 균열발생 이후에서 항복에 이르기까지 인장 성능을 균일하게 유지하는 것으로 나타났다. 철근이 배근된 HPFRCC의 인장 강도는 철근이 없는 부재에서 측정된 인장강도에 비해 낮아지는 것으로 나타났으며, 이는 HPFRCC의 높은 건조수축량과 철근의 구속효과에 의한 것으로 사료된다. 이 연구에서 확인된 인장강성 실험 결과 및 분석 자료는 HPFRCC를 철근과 함께 적용할 경우 유용하게 활용될 것으로 기대된다.

• Advances in concrete construction
• /
• 제1권2호
• /
• pp.121-136
• /
• 2013

Tension tests were carried out to investigate the effect of the corrosion pattern on the ductility of tension bars extracted from a 26-year-old corroded reinforced concrete beam. The tensile behavior of corroded bars with different corrosion patterns was examined carefully, as were two non-corroded bars extracted from a 26-year-old control beam. The results show that corrosion leads to an increase in the ratio of the ultimate strength over the yield strength, but reduces the ultimate strain at maximum force of the reinforcement. Both the corrosion pattern and the corrosion intensity play an important role in the ductile properties. The asymmetrical distribution of the corrosion around the surface is a decisive factor, which can influence the ultimate strain at maximum force more seriously.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.109-113
• /
• 2003

In this experiment, we distribute the bending angle to 60$^{\circ}$, 90$^{\circ}$, 120$^{\circ}$, and we separate it in to two groups. One is straightening right after bending and the other is straightening after one week. The bars we will use are HD13 and HD16. The number of tests will be 60 times. In the case of HD16, the increase of bending angle decreased yield strength and maximum strength. And compared with thinner bars, HD16 showed bigger differences in yield strength and maximum strength when the 'being bent' duration got longer. So it shows that when we bend and after straighten a bar, stress change takes place on the surface of the bar. At the beginning it shows it's ductility after that it deforms while transforming it's character to destroying. And also, if we straighten a bar after bending, it doesn't get straighten like the original form. So it makes torsion and this torsion makes moments in different areas.

• 콘크리트학회논문집
• /
• 제18권4호
• /
• pp.527-534
• /
• 2006

본 논문은 외부 비부착 고장력 인장봉을 사용한 새로운 방식의 RC보의 휨보강공법에 관한 논문이다. 제안된 공법의 장점은 기존의 보강방식과 비교하여 빠르고 간단하게 시공할 수 있다는 점이다. 제안된 공법은 기존의 외부 비부착 프리스트레스 텐던공법의 많은 장점을 보유함과 동시에 프리스트레싱 작업시간을 단축시킨 공법이다. 탄소섬유쉬트, 강판 및 고장력 인장봉과 같은 서로 다른 보강재를 사용하여 보강한 철근콘크리트보 실험체를 총 9개 제작하여 실험하였다. 실험 결과, 탄소섬유쉬트로 보강된 RC보는 쉬트의 박리로 인한 취성파괴모드를 나타내었다. 강판보강 시험체의 경우도 기존의 일반적인 앵커와 에폭시로 접합을 할 경우에 강판보강의 효과가 떨어지고 앵커설계를 특별히 하고 시공에 유의하여야 함을 보여주고 있다. 반면에 고장력 인장봉을 사용한 RC보의 경우에는 무보강 RC보와 비교하여 최대내력이 212% 증가하였고, 중앙부 처짐은 65% 감소되었다. 실험 결과는 고장력 인장봉으로 보강된 RC보는 특히 강도와 변형능력에서 기존의 보강방법을 사용한 실험체보다 우수성을 보여주었다.

• Structural Engineering and Mechanics
• /
• 제65권2호
• /
• pp.155-162
• /
• 2018

A smart glass fiber reinforced polymer (SMFRP) reinforcing bar with a fiber Bragg grating (FBG) sensor was fabricated using a pultrusion technique, while ribs were formed to improve bonding between concrete and SMFRP. Then, strain of SMFRP bars were measured for a uniaxial tension test of an SMFRP bar, and a four-point bending test of concrete beams reinforced with SMFRP bars. The results of a uniaxial tension test illustrate that the strain obtained from an FBG sensor agrees well with that obtained from electrical resistance strain gauge (ERSG). Additionally, concrete beams reinforced with SMFRP bars were fabricated, and actual flexural test were performed while the strain of with an FBG sensor was compared with that of ERSG. The experimental results demonstrate that SMFRP bars can be used as reinforcement of concrete member while providing deformation information. Furthermore, SMFRP bars may provide stronger durability and smart monitoring to reinforced concrete members under corrosive environments during a service life.

• 한국도로학회논문집
• /
• 제17권3호
• /
• pp.77-83
• /
• 2015

PURPOSES : In this study, a fracture-based finite element (FE) model is proposed to evaluate the fracture behavior of fiber-reinforced asphalt (FRA) concrete under various interface conditions. METHODS : A fracture-based FE model was developed to simulate a double-edge notched tension (DENT) test. A cohesive zone model (CZM) and linear viscoelastic model were implemented to model the fracture behavior and viscous behavior of the FRA concrete, respectively. Three models were developed to characterize the behavior of interfacial bonding between the fiber reinforcement and surrounding materials. In the first model, the fracture property of the asphalt concrete was modified to study the effect of fiber reinforcement. In the second model, spring elements were used to simulated the fiber reinforcement. In the third method, bar and spring elements, based on a nonlinear bond-slip model, were used to simulate the fiber reinforcement and interfacial bonding conditions. The performance of the FRA in resisting crack development under various interfacial conditions was evaluated. RESULTS : The elastic modulus of the fibers was not sensitive to the behavior of the FRA in the DENT test before crack initiation. After crack development, the fracture resistance of the FRA was found to have enhanced considerably as the elastic modulus of the fibers increased from 450 MPa to 900 MPa. When the adhesion between the fibers and asphalt concrete was sufficiently high, the fiber reinforcement was effective. It means that the interfacial bonding conditions affect the fracture resistance of the FRA significantly. CONCLUSIONS : The bar/spring element models were more effective in representing the local behavior of the fibers and interfacial bonding than the fracture energy approach. The reinforcement effect is more significant after crack initiation, as the fibers can be pulled out sufficiently. Both the elastic modulus of the fiber reinforcement and the interfacial bonding were significant in controlling crack development in the FRA.