• International Journal of Railway
• /
• 제6권2호
• /
• pp.53-58
• /
• 2013

In this study, cyclic triaxial tests were carried out with the coarse granular materials used in Korean railway infrastructure (reinforced trackbed, gravel of transition zone, upper subgrade of railway) and Young's modulus for the target materials in small strain level were suggested. And the result of elastic modulus suggested in this study is expected to be effectively applied to dynamic analysis of the railway embankment structure using similar material, since the grain size distributions and unit weight of the material tested in this study are specified in Korean Railway Design Criteria.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.680-685
• /
• 2005

An active application of concrete track is being expected for the future constructions of Korean railroad. For the successful concrete track construction in earthwork areas, proper reinforced subgrades, which effectively distribute train loads to subground, should be installed. In this paper, behaviors of concrete track on the reinforced subgrade with the standard stiffness and depth were investigated through numerical analyses. The appropriateness of the reinforced subgade was evaluated by analyzing the distributions of the settlements and vertical stress beneath the concrete slab.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1827-1832
• /
• 2007

The purpose of a railway track is to provide a smooth surface for safe and economical train transportation. The performance of the track results from a complex interaction of the track and subgrade components in response to train loading and environmental actions. In the past, the role of subgrade as the track foundation were not recognized adequately. There are insufficient information and inadequate methods for subgrade design, assessment and improvement. This situation has survived for a long time largely because a subgrade defect can often be adjusted by adding more ballast under the ties or applying more frequent track maintenance. Therefore, the application of reinforced roadbed technology will be expected to increase in the future. The reinforced roadbed thickness is set depending on subgrade reaction modulus$(K_{30})$ in the condition of upper subgrade through PBT in both conventional railroad and KTX railroads. As train velocity (V), train passing tonnage (N), and train axial load (P) are not considered in design, the roadbed thickness could be overestimated (or underestimated). Therefore, In this study, the computer model, GEOTRACK, was analyzed the influence of reinforced roadbed thickness factors on track modulus and the characteristics of stress pulses in track and subgrade generated by repeated axle loading.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1279-1286
• /
• 2007

The purpose of a railway track is to provide a smooth surface for safe and economical train transportation. The performance of the track results from a complex interaction of the track and subgrade components in response to train loading and environmental actions. In the past, the role of subgrade as the track foundation were not recognized adequately. There are insufficient information and inadequate methods for subgrade design, assessment and improvement. This situation has survived for a long time largely because a subgrade defect can often be adjusted by adding more ballast under the ties or applying more frequent track maintenance. Therefore, the application of reinforced roadbed technology will be expected to increase in the future. The reinforced roadbed thickness is set depending on subgrade reaction modulus($K_{30}$) in the condition of upper subgrade through PBT in both conventional railroad and KTX railroads. As train velocity (V), train passing tonnage (N), and train axial load (P) are not considered in design, the roadbed thickness could be overestimated (or underestimated). Therefore, in this study has proposed a determination method of reinforced roadbed thickness using design chart made by resilience modulus and properties of earthwork materials.

• 한국지반신소재학회논문집
• /
• 제11권4호
• /
• pp.27-35
• /
• 2012

국내에 적용되고 있는 블록식 보강토 옹벽의 전면벽체는 보강재의 고정 및 뒷채움재의 유실방지 역할을 하지만, 벽체에 작용하는 하중에 대한 역학적 기능은 부족하다. 보강토체를 구성하는 벽체에 휨 및 전단에 대한 저항 성능을 부여하기 위하여 개발된 강성벽 일체형 보강노반은 다양한 장점에도 불구하고, 기존 공법과 비교하여 경제성 및 시공성 측면에서 단점이 부각되어 현장에의 적용은 미루어져 왔다. 본 연구에서는 강성벽 일체형 보강노반의 국내 적용성 향상을 목적으로 강성벽의 성능은 확보하면서 경제성 및 시공성을 향상시키기 위한 보강재 연직 배치 간격 및 길이 변화가 보강토체 전체의 거동에 미치는 영향을 평가하였다. 이를 위하여 강성벽을 갖는 1/10 축소모형 보강토체 및 높이 3m의 실내 실대형 시험체를 조성하고, 모사 열차하중 하에서의 변형 특성을 평가하였다. 시험 결과 비록 짧은 보강재를 사용함에도 불구하고 강성벽 보강노반에서 벽체 수평 발생변위 및 침하는 허용한계 수준 이하이었으며, 보강재 연직 배치간격이 30cm에서 40cm로 증가하여도 사용성 측면에서의 성능 수준에는 큰 변화가 없는 것을 확인할 수 있었다.

• 한국지반공학회논문집
• /
• 제18권2호
• /
• pp.5-12
• /
• 2002

본 연구에서는 연약지반 상에 축조되는 고속철도 노반을 보강하기 위해 사용된 지오셀의 효과를 평가하기 위해 다양한 현장 평판재하시험과 동적 모형토조시험을 수행하였다. 실험결과로부터 지오셀 사용에 의한 보강노반의 두께 감소효과와 노상 지지력 증가효과가 평가되었다. 지오셀 1층과 복토 loom를 사용하면 동일한 두에의 쇄석층을 사용할 경우와 비교하여 3~4배의 지지력 개선효과가 있으며, 노반두께를 약 35cm 정도 감소시킬 수 있는 것으로 평가되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 토목섬유 학술발표회 논문집
• /
• pp.129-141
• /
• 1999

This paper presents the results of plate load test and dynamic load test performed to evaluate the performance of geocell where it is used to reinforce soft subgrade for high-speed railroad. Efficacy of geocell was observed in increase in bearing capacity of subgrade and reduction of thickness of reinforced sub-ballast. Plate load tests were carried out at four different places with varying foundation soil strength as a function of number of geocell layer, type of filler material, thickness of cover soil, and the presence of non-woven geotextile. Dynamic load tests were performed in a laboratory. The test soil chamber consists of, from the bottom, 50 cm thick clayey soil, one layer of geocell filled with crushed stone, 10 cm thick crushed stone cover, reinforced sub-ballast of varying thickness, 35 cm thick ballast. This configuration was determined based on the results of numerical analysis and plate load tests. For each set of the dynamic load tests, loads were applied more than 80,000 times. One layer of geocell underlying a 10 cm thick cover soil led to an increase in bearing capacity three to four times compared to a crushed stone layer of the same thickness substituted for the geocell and cover soil layer. Given the test conditions, the thickness of reinforced sub-ballast can be reduced by approximately 35 cm with the presence of geocell.

• 한국지반공학회논문집
• /
• 제39권11호
• /
• pp.23-31
• /
• 2023

콘크리트 궤도의 침하는 고속열차의 안전한 운행을 크게 저해할 수 있으며 복구에 상당한 비용이 소요되므로 최근 큰 문제로 대두되고 있다. 침하의 가장 큰 원인 중 하나는 터널공사의 부산물로 발생하는 암석재료를 적정한 입도분를 가진 토사 혼합 없이 하부노반 성토에 사용하기 때문으로 보고되고 있다. 본 논문에서는 암석재료로 성토된 하부노반의 부분 보강으로 인한 침하억제 효과를 수치해석으로 평가하였다. 하부노반에 일정하게 배치된 기둥 형태의 보강 영역은 상부노반에 지반아칭을 유발하게 되며 성토하중이 보강된 영역에 집중하게 되어 침하가 억제되는 효과가 있다. 유한요소해석을 통하여 보강된 영역의 크기, 강성, 간격이 하부노반의 침하억제에 미치는 효과를 평가하였으며, 해석 결과를 토대로 침하를 허용치 이내로 억제하기 위한 최소 보강 간격을 결정하는 설계 방법을 제안하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.562-567
• /
• 2001

In this study, performance of reinforced railroad roadbeds with the slag(HMS-25) and soil were investigated through the real scale railroad roadbed tests. Several real scale reinforced railroad roadbeds were constructed in the laboratory with different subgrade conditions and were tested with the estimated actual train loads including the impact loading of train. The affecting factors such as plastic ＆ elastic settlement roadbed layers as well as surface of rails were measured. The settlement at rail surface and roadbed surface of case of soil and slag roadbed comparative with good roadbed site were 2.3, 5.7 times and 1.9, 1.6 times, respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.215-222
• /
• 2000

The reinforced roadbed should have the ability to spread out the load intensity lower than the bearing capacity of the subgrade of track structure as well as to prevent the softening of roadbed by providing appropriate stiffness in the roadbed, thus fully supports the track structures. Full scale reinforced roadbeds with several different types of monotoring sensors was also constructed to evaluate the performance of each reinforced roadbed through the continuous monitoring while the train operation. In this study, Field tests such as PLT, SASW were also carried out at each reinforced roadbed. The results of the field and lab tests, installation and calibration of sensors, as well as construction condition of the reinforced roadbed are presented.