• 제목/요약/키워드: Regulation Parameter

검색결과 130건 처리시간 0.028초

도로의 최적노선대 선정방법 비교 연구 (Comparative Study on Determining Highway Routes)

  • 김관중;장명순
    • 한국도로학회논문집
    • /
    • 제8권4호
    • /
    • pp.159-179
    • /
    • 2006
  • 도로의 구조 시설기준에 관한 규칙과 국도의 노선계획 설계지침에 준하여 실행되는 현행 노선선정방법과, 컴퓨터 발전과 함께 국내외에서 연구되고 있는 선형최적화 모형식으로 사례연구 구간의 도로 노선을 선정하여 노선 특성을 비교 분석해본 결과, 현행 노선선정방법은 단계별, 구간별로 순차적인 노선선정이 이루어지는 국지적 최적을 추구하나, 선형 최적화 모형식 선정방법은 모든 설계요소가 동시에 고려된 체계최적(System Optimal)의 노선탐색 능력이 있는 것으로 분석되었다. 또한 선형최적화 모형에서 기존 설계공종별 실제공사비로 비용함수를 보정하여 노선을 선정한 결과 현실에 부합되게 설계되었으며, 경제성이 높은(B/C=1.66) 대안 노선이 탐색되었다. 선형최적화 설계모형은 터널 종단에서 종단 경사가 변화하는 등 보완될 점이 있음에도 타당성조사와 기본설계단계에서 노선선정 도구로서 설계시간 및 비용단축, 다양한 대안 노선의 검토 등의 많은 장점을 지니고 있음이 확인되었다.

  • PDF

선박용 SCR 시스템에 대한 실험적 연구 (Experimental study on marine SCR system)

  • 남홍식;허재정;신동욱;노범석;류기탁;이윤형;강정구;이성우
    • 수산해양기술연구
    • /
    • 제56권2호
    • /
    • pp.183-192
    • /
    • 2020
  • This study conducted the experiment for the development of the low pressure type SCR system. The experimental equipment of SCR system was installed, which was widely used as the nitrogen oxides abatement system, and the demonstration experiment was conducted to see that it met the Tier III regulation according to the IMO NOx Technical Code. The SCR system demonstration experiment was divided into three stages: SCR system component operation test, engine parameter test by engine load, and NOx abatement performance and ammonia slip verification test. The final performance of the SCR system was verified through analysis of NOx abatement performance and ammonia slip test results for each load variation.

차량선팅으로 인한 차량추종모델의 파라메터 변화분석 (Parameter Variation of Car-Following Models Due to Vehicle Tinting)

  • 이청원;김혜원
    • 한국ITS학회 논문지
    • /
    • 제8권5호
    • /
    • pp.48-56
    • /
    • 2009
  • 현재 사회적으로 선팅에 대한 규제가 논란이 되고 있으나 이를 뒷받침할 만한 공학적인 근거가 부족한 실정이다. 선행연구에 따르면 과도한 선팅차량이 추종차량의 가감속등에 영향을 미쳐 용량저해 요인으로 작용할 수도 있다는 가설을 확인하였으나, 자료의 한계로 추종모델와 연결된 분석은 이루어지지 못하였기 때문에 추가연구가 필요하다. 이에 본 연구에서는 RTK-GPS를 이용하여 자료를 수집하였으며, 선두차량의 차량선팅 암도에 따라 후방차량에 미치는 영향을 차량추종 모델의 파라메터 변화를 통해 분석하였다. 본 논문에서는 가시광선 투과율에 따른 차두거리, 가속소음, 민감도, 반응시간을 분석하였다. 추종모델의 기본식인 GM 1모델 뿐만 아니라, 차량의 차두거리까지 고려된 GM 3모델에 적용시켜 민감도를 분석하였다. GM의 3모델 역시 1모델과 동일한 패턴의 결과로 도출되었으며, 선두차량의 선팅정도가 클수록 후방차량에 미치는 영향이 더 커지며, 선두차량의 선팅으로 인한 위험도는 2번째 차량보다 3번째 차량이 더 큰 것을 확인하였다. 차량의 선팅정도에 따라 교통류 안정성에 미치는 영향 분석에 관한 연구는 향후 과제로 남긴다.

  • PDF

초고온 호기성 퇴비화의 물리·화학적 인자 평가 (Physicochemical Effect on Ultra Thermophilic Aerobic Composting Process)

  • 박세용;유의상;정대혁;이진;김문일
    • 한국지반환경공학회 논문집
    • /
    • 제11권11호
    • /
    • pp.27-36
    • /
    • 2010
  • 본 연구는 정읍시에서 배출되는 하수슬러지, 축산 분뇨, 음식물 쓰레기를 대상으로 Pilot-scale($100m^3$) 초고온 호기성 퇴비화 공정에서의 온도, pH, C/N비, 함수율, 유기물 함량, 그리고 부피 등 물리 화학적 영양 인자를 평가하였다. 각각의 대상 물질은 1차 발효(유기성 폐기물+종균)와 2차 발효(유기성 폐기물+종균+반송 퇴비)로 나누어 수행하였다. 퇴비화가 진행됨에 따라 교반과 송풍만으로 열공급 없이 온도는 1,2차 발효에서 최고온도 $90{\sim}105^{\circ}C$가 되었다. pH, $O_2$, $CO_2$, $NH_3$, 농도 변화는 전형적인 미생물에 의한 유기물 분해 양상을 보여주었으며, 다른 모든 물리 화학적 인자들은 일반 호기성 퇴비화의 성능 이상을 보여주었다. 발효가 완료된 후 퇴비의 중금속 농도는 퇴비 비료 규격 기준 농도에 적합한 것으로 나타났다.

선형 추진 BLDC 모터에 대한 파라미터 추정기법을 이용하는 오토튜닝(Auto Tunning) PI 제어기설계 (The Design of an Auto Tunning PI Controller using Parameter Estimation Method for the Linear BLDC Motor)

  • 차영범;송도호;김진애;최중경
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2005년도 춘계종합학술대회
    • /
    • pp.959-962
    • /
    • 2005
  • 서보 모터는 컴퓨터와 센서로부터 오는 지령에 대해 높은 위치 정밀도와 정확한 속도제어가 가능해 자동화 시스템에서 중요한 부분으로 사용된다. 본 논문에서는 선형추진 BLDC모터로부터 얻어지는 파라메터를 추정하여 정현여자에 의해 구동되는 방식을 제안했다. 파라미터 추정은 제어기의 게인 튜닝과 외란 관측기를 통해 이루어졌다. 이러한 것을 가능하게 하기 위해 DSP(TMS320F240)를 사용하여 시스템을 구성 하였으며 FOC(Field Oriented Control)방식을 적용하였다. 본 시스템에 사용 된 TMS320F240은 A/D Converter와 PWM 발생부, 다수의 IO Port를 내장하고 있어 서보모터 제어에 유용하게 사용될 수 있는 프로세서이다.

  • PDF

A Themotropic Behavior of Egg PC Liposome Containing the Very Long Chain Fatty Acyl Component,${\alpha},{\omega}$-13,16-Dimethyloctacosanedioate Dimethyl Ester(DME C30) Isolated from The Thermophilic Anaerobic Bacteria, Thermoanaerobacter ethanolicus

  • 김현명;강세병;정승호
    • Bulletin of the Korean Chemical Society
    • /
    • 제22권9호
    • /
    • pp.979-983
    • /
    • 2001
  • Thermoanaerobacter ethanolicus is a strictly anaerobic and thermophilic bacterium whose optimum temperature ranges over $65-68^{\circ}C.$ T. ethanolicus was known to contain a bipolar very long chain fatty acyl component such as $\alpha$, $\omega-1316-dimethyloctacosanedioate$, as one of the major membrane components. However, exact physiological role of this unusual component in the membrane remains unknown. Such a very long chain fatty acyl component, $\alpha$, ${\omega}-1316-dimethyloctacosanedioate$, dimethyl ester (DME C30), was isolated, and purified from the membrane of T. ethanolicus. As a function of added concentrations of the $\alpha$, $\omega-1316-dimethyloctacosanedioate$, dimethyl ester (DME C30) or cholesterol into the standard liposomes, the acyl chain ordering effect was investigated by the steady-state anisotropy with 1,6-diphenyl-1,3,5-hexatriene (DPH) as a fluorescent probe. Acyl chain order parameter (S) of vesicles containing DME C30 is higher comparing with phosphatidylcholine (PC) only vesicles. This result was discussed thermodynamically with the aid of the simulated annealing molecular dynamics simulations. Through the investigation of all the possible conformational changes of DME C30 or cholesterol, we showed that DME C30 is very flexible and its conformation is variable depending on the temperature comparing with cholesterol, which is rigid and restricted at overall temperature. We propose that the conformational change of DME C30, not the configurational change, may be involved in the regulation of the membrane fluidity against the changes of external temperature.

고효율 고역률 LED 조명장치용 전원공급장치 (High Efficiency and High Power-Factor Power Supply for LED Lighting Equipment)

  • 정강률
    • 한국정보기술학회논문지
    • /
    • 제16권11호
    • /
    • pp.23-34
    • /
    • 2018
  • 본 논문에서는 고효율 고역률 LED 조명장치용 전원공급장치를 제안한다. 제안한 전원공급장치는 풀브리지 다이오드 정류기와 플라이백 컨버터로 구성된 단일단 전력구조이며, 이에 따라 하나의 제어기 IC와 하나의 전력반도체스위치만을 사용하여 역률개선과 출력전압조정을 동시에 수행한다. 또한 제안한 전원공급장치는 회생스너버를 이용하여 주스위치의 전압스트레스와 스위칭손실을 감소시키며, 동기정류기를 이용하여 시스템 효율을 향상한다. 적용된 동기정류기는 새로운 전압구동형이며 동작과 구성이 간단하다. 본 논문에서는 역률개선부와 주전력변환부의 동작분석을 통하여 제안한 전원공급장치의 동작원리를 설명하고 동기정류기의 동작에 관하여 간략하게 설명한다. 또한 40W급 프로토타입 전력회로의 설계예시를 제시하며, 설계된 회로파라미터들에 의해 제작된 프로토타입의 실험 결과를 통하여 제안한 전원공급장치의 동작특성을 입증한다.

환경 인쇄 기술의 발전과 인쇄물의 $CO_2$ 발생량에 관한 연구 (A Study about Development of Environment Printing Technology and $CO_2$)

  • 이문학
    • 한국인쇄학회지
    • /
    • 제30권3호
    • /
    • pp.89-114
    • /
    • 2012
  • For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

경영전략이 경영성과에 미치는 영향 -정보기술 활용도를 매개와 조절효과 중심으로- (The Effects of Business strategy on Business performance -IT applicability with parameter and regulation effect-)

  • 공석진;양해술
    • 디지털융복합연구
    • /
    • 제12권1호
    • /
    • pp.177-192
    • /
    • 2014
  • 본 연구는 기업의 경영전략이 경영성과에 어떠한 영향을 미치고 있는지를 파악하고자 한다. 또한, 본 연구는 경영전략의 전형으로 간주되고 있는 Miles & Snow의 '적응전략'과 Michael E. Porter의 '본원적 경쟁전략'을 동시에 적용해서 기존의 기업을 대상으로 적용될 수 있는 경영전략 유형을 비교하여 재무성과와 비재무성과 평가를 목적으로 하고 있다. 이상의 연구의 결과를 요약하면 다음과 같다. 첫째, 경영전략은 경영성과에 영향을 미칠 것이라는 가설에 대하여 '적응전략'중 공격형전략과 방어형전략은 경영성과 재무성과와 비재무성과에 긍정적인 영향을 미치는 것으로 확인되었다. 둘째, 경영전략은 경영성과에 영향을 미칠 것이라는 가설에 대하여 '본원적 경쟁전략'중에 원가우위전략과 차별화전략은 경영성과 재무성과와 비재무성과에 긍정적인 영향을 미치는 것으로 확인되었다. 따라서, 경영전략이 경영성과에 유의한 정(+)의 영향을 미치며, 경영전략의 특성과 경영성과 간의 관계에서 정보기술 활용도의 조절효과가 있는 것을 알 수 있었다.

The Effect of Exercise Intensity on Muscle Activity and Kinematic Variables of the Lower Extremity during Squat

  • Jung, Jae-Hu;Chae, Woen-Sik
    • 한국운동역학회지
    • /
    • 제27권3호
    • /
    • pp.197-203
    • /
    • 2017
  • Objective: The purpose of this study was to determine how exercise intensity affects muscle activity and kinematic variables during squat. Method: Fifteen trainers with >5 years of experience were recruited. For the electromyography (EMG) measurements, four surface electrodes were attached to both sides of the lower extremity to monitor the rectus femoris (RF) and biceps femoris. Three digital camcorders were used to obtain three-dimensional kinematics of the body. Each subject performed a squat in different conditions (40% one-repetition maximum [40%1RM], 60%1RM, and 80%1RM). For each trial being analyzed, three critical instants and two phases were identified from the video recording. For each dependent variable, one-way analysis of variance with repeated measures was used to determine whether there were significant differences among the three different conditions (p<.05). When a significant difference was found, post hoc analyses were performed using the contrast procedure. Results: The results showed that the average integrated EMG values of the RF were significantly greater in 80%1RM than in 40%1RM during the extension phase. The temporal parameter was significantly longer in 80%1RM than in 40%1RM and 60%1RM during the extension phase. The joint angle of the knee was significantly greater in 80%1RM than in 40%1RM at flexion. The range of motion of the knee was significantly less in 80%1RM than in 40%1RM and 60%1RM during the flexion phase and the extension phase. The angular velocity was significantly less in 80%1RM than in 40%1RM and 60%1RM during the extension phase. Conclusion: Generally, the increase of muscle strength decreases the pace of motion based on the relation between the strength and speed of muscle. In this study, we also found that the increase of exercise intensity may contribute to the increase of the muscle activity of the RF and the running time in the extension phase during squat motion. We observed that increased exercise intensity may hinder the regulation of the range of motion and joint angle. It is suitable to perform consistent movements while controlling the proper range of motion to maximize the benefit of resistance training.