• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.205-208
• /
• 2002

Numerous studies have been performed to develop an analytical model that can predict the reflection of regular or irregular waves from a perforated-wall caisson breakwater. Though such irregular wave models as Suh et at. (2001) become available, regular wave models are still in extensive use because of their simplicity. In the present study, using the regular wave model of Fuggazza and Natale(1992), the reflection of irregular waves from a perforated-wall caisson breakwater was calculated in several different methods. First, the regular wave model was re-validated by the hydraulic model tests. Though the model somewhat over-predicted the reflection coefficients at larger values and under-predicted them at smaller values, overall agreement was pretty good between calculation and measurement. Then, the regular wave model was applied to calculate the irregular wave reflection in the experiments of Suh et at.(2001) and Bennett et al. (1992). In applying the regular wave model to irregular wave reflection, several different methods were used. The results showed that it is the most reasonable to use the regular wave model repeatedly for each frequency component of the irregular wave specuum with the root-mean-squared wave height for all the frequencies .

• 한국해안해양공학회지
• /
• 제15권1호
• /
• pp.11-20
• /
• 2003

본 논문에서는 규칙파 모델을 이용하여 유공케이슨 방파제로부터의 불규칙파의 반사를 계산하는 몇 가지 방법들을 검토한다. 첫 번째 방법은 불규칙파를 파고 및 주기가 각각 불규칙파의 제곱평균제곱근 파고 및 유의주기와 같은 규칙파로 근사하는 것이다. 두 번째는 불규칙파 스펙트럼의 각 주파수 성분에 대하여 규칙파 모델을 반복적으로 사용하는 것이다. 파의 주기는 성분파의 주파수에 따라 결정되며, 모든 주파수에 대해서 제곱평균제곱근 파고를 사용한다. 세 번째 방법은 두 번째 방법과 같으나, 각 성분파의 에너지에 해당하는 파고를 사용한다. 이전 연구자들의 실험 결과와 비교해 본 결과, 두 번째 방법이 가장 타당하며, 주파수 평균 반사율과 반사파 스펙트럼 모두 실험치와 양호한 일치를 보였다.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.1-9
• /
• 2010

A series of experiments employing particle image velocimetry (PIV) technique was conducted to produce benchmark wave kinematics data for regular waves having four different wave slopes in 2-D wave tank. Water velocities and accelerations near the free surface of regular waves were computed from image pair obtained by PIV systems. With the measured wave velocity field, the wave accelerations were computed using a centered finite difference scheme. Both local and convective components of the total accelerations are obtained from experimental data. With increasing the wave slope, the horizontal velocity and the vertical accelerations near the wave crest obtained by PIV technique became larger than theoretical results, which are well-known phenomena of the wave nonlinearity. It is noted that the relative magnitude of convective acceleration to the local acceleration became larger with increasing wave slope.

• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.222-235
• /
• 2015

The purpose of this study is to suggest guidelines for riser fatigue analysis in terms of selection of reasonable analysis method. Three analysis methods (spectral, regular wave, rain-flow counting) are introduced and compared. As the riser systems give non-linear response, the time-domain analysis method is more preferred than frequency-domain analysis method. The spectral fatigue analysis method, however, is still useful for identifying fatigue prone areas. Once stress RAO is established, fatigue damage can be calculated very quickly. The regular wave method and the rain-flow counting method are more time consuming but give more exact results compare to spectral method. In case of regular wave method, a set of regular waves which represent random sea states is considered for dynamic analysis. The rain-flow counting method is the most intuitive and exact method because it refers time history stresses containing most of non-linear effects of the riser system. However, it is not common for early design stage to use rain-flow counting method because of its high cost. In this study, it was confirmed that the regular wave method is the most cost effective way in specific cases. However, if the system is highly non-linear, it seems that the regular wave method gives less accurate results than rain-flow counting method. Therefore, it is imperative that the engineers select appropriate analysis method based on design stage and given engineering period. This paper also discusses the theoretical background of each calculation method and hydrodynamic aspects of marine riser systems. A steel catenary riser (SCR) line on FPSO was considered and marine dynamic program (OrcaFlex) was used for static and dynamic analysis.

• 한국해안해양공학회지
• /
• 제14권3호
• /
• pp.240-246
• /
• 2002

타원형 천퇴해역에 대한 규칙파 및 일방향 불규칙파의 전파변형에 대한 수리모형실험을 수행하였다. 수리모형실험은 비쇄파조건의 규칙파와 천퇴의 정상부에서 부분쇄파가 발생하는 일방향 불규칙파를 대상으로 수행되었다. 수리모형실험 조건에 대해 포물형근사식을 적용한 수치해석을 수행하여 실험결과와 비교하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2017년도 추계학술대회
• /
• pp.19-21
• /
• 2017

Ship maneuvering performance is usually estimated in calm water conditions which provide valuable information about the ship maneuvering characteristics at the early design stage. However, the course-keeping ability and the maneuvering performance of a ship can be significantly affected by the presence of waves when ship maneuvers in real sea condition. Therefore, it is necessary to understand the maneuvering behavior of a ship in waves in the viewpoint of ship safety in the design stage. In this study, the force and yaw moment acting on a moving ship in regular waves with different wave length and wave direction will be performed in the square wave tank in Changwon National University. The results of this study can be used to help a person to design a ship hull with the best ship maneuverability in waves and disseminate knowledge on predicting ship maneuvering in regular waves in various wave directions.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.799-809
• /
• 2020

In this study, the supercavitating flow of a high-velocity moving body near air-water surface is calculated and analyzed based on a commercial CFD software ANSYS Fluent. The effect of regular wave parameters including both wave height and wavelength on the cavitating flow and force characteristics of a body at different velocities is investigated. It is found that the cavity shape, lift coefficient and drag coefficient of the body vary periodically with wave fluctuation, and the variation period is basically consistent with wave period. When the wavelength is much greater than the cavity length, the effect of wave on supercavitation is the alternating effect of axial compression and radial compression. However, when the wavelength varies around the cavity length, the cavity often crosses two adjacent troughs and is compressed periodically by the two wave troughs. With the variation of wavelength, the average area of cavity shows a different trend with the change of wave height.

• Ocean Systems Engineering
• /
• 제12권4호
• /
• pp.439-459
• /
• 2022

This paper describes experimental studies of impact pressure generated by breaking regular waves in shallow water on a vertical cylinder. Experimental work was carried out in a shallow water flume using a 1:30 - scale model of a vertical rigid circular hollow cylinder with a diameter 0.2 m. This represents a monopile for shallow water offshore wind turbines, subjected to depth induced breaking regular waves of frequencies of 0.8 Hz. The experimental setup included a 1 in 10 sloping bed followed by horizontal bed with a constant 0.8 m water depth. To determine the breaking characteristics, plunging breaking waves were generated. Free surface elevations were recorded at different locations between the wave paddle to the cylinder. Wave impact pressures on the cylinder at a number of elevations along its height were measured under breaking regular waves. The depth-induced wave breaking characteristics, impact pressures, and wave run-up during impact for various cylinder locations are presented and discussed.

• 한국해안·해양공학회논문집
• /
• 제34권3호
• /
• pp.58-71
• /
• 2022

본 연구에서는 바닥 조파장치가 설치된 수로에서 재현된 규칙파의 2차원 유속장에 대한 해석해를 유도하였다. 바닥 조파장치로 삼각형 및 사각형 형상이 적용되었다. 선형파 이론과 움직이는 바닥에 대한 경계조건, 동역학적 및 운동학적 자유수면 경계조건을 이용하여 속도포텐셜을 유도하였으며, 이로부터 각 방향 성분의 유속에 대한 해석해를 구하였다. 적분식 형태로 유도된 속도포텐셜 및 유속에 대한 해석해를 수치해석으로 계산하였다. 유도된 해석해는 바닥 조파장치가 설치된 조파수로에서 규칙파의 유속 특성에 대해 물리적으로 타당한 결과를 보였다.

• 한국해안·해양공학회논문집
• /
• 제34권4호
• /
• pp.93-99
• /
• 2022

본 연구에서는 바닥 조파장치가 설치된 3차원 조파수조에서 재현된 규칙파에 대한 해석해를 유도하였다. 바닥 조파장치로 삼각형 형상, 사각형 형상 및 두 형상이 복합된 형상이 적용되었다. 선형파 이론과 움직이는 바닥에 대한 경계조건, 동역학적 및 운동학적 자유수면 경계조건을 이용하여 조파수조 내의 3차원 속도포텐셜을 유도하였다. 그리고, 이로부터 각 방향 성분의 유속과 자유수면변위에 대한 해석해를 구하였다. 유도된 해석해는 바닥 조파장치가 설치된 조파수조에서 규칙파의 전파 특성에 대해 물리적으로 타당한 결과를 보였다. 바닥 조파장치가 snake 형태로 움직이는 경우의 비스듬히 전파하는 파랑의 조파에 대해서도 해석해를 유도하였으며, 해석 결과는 이론적으로 예측한 결과와 일치하였다.