• Ocean Systems Engineering
• /
• 제11권1호
• /
• pp.1-16
• /
• 2021

Experimental and numerical investigations were conducted to study the performance of a surface-fixed horizontal porous wave barrier in regular waves. The characteristics of the reflection and transmission coefficients, energy dissipation, and vertical wave force were examined versus different porosities of the barrier. Numerical simulations based on 3D Reynolds Averaged Navier-Stokes equations with standard low-Re k-ε turbulent closure and volume of fluid approach were accomplished and compared with the experimental results conducted in a 2D wave tank. Experimental measurements and numerical simulations were shown to be in satisfactory agreement. The qualitative wave behavior propagating over a horizontal porous barrier such as wave run-up, wave breaking, air entrapment, jet flow, and vortex generation was reproduced by CFD computation. Through the discrete harmonic decomposition of the vertical wave force on a wave barrier, the nonlinear characteristics were revealed quantitatively. It was concluded that the surface-fixed horizontal barrier is more effective in dissipating wave energy in the short wave period region and more energy conversion was observed from the first harmonic to higher harmonics with the increase of porosity. The present numerical approach will provide a predictive tool for an accurate and efficient design of the surface-fixed horizontal porous wave barrier.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.212-219
• /
• 2005

Real sea waves in a towing wave basin have been generated using random periodic motion of the segmented wave makers and the wave reflections of sidewalls. Theoretically, the real sea waves can be described by the superposition of many random oblique waves. This paper introduces numerical real sea wave generation in a rectangular wave basin using spectral method that uses a superposition of orthogonal functions which have to satisfy the Laplace equation. Oblique regular waves, long crested irregular waves and real sea waves were simulated and met the requirement of sidewall wave reflection and wave absorption. MLM (Maximum Likelihood Method) and Spatial Fourier Transform were used in order to obtain propagated wave direction characteristics. The estimated results proved the usefulness of the method and the performances showed reasonable directional patterns comparing with generating patterns.

• Human Ecology Research
• /
• 제61권1호
• /
• pp.73-90
• /
• 2023

This study aimed to identify ways to implement pre-parent education for adolescents in regular classes at school. This was achieved by investigating whether the contents of the 2015 revised curriculum high-school technology and home economics textbooks reflected the goals of pre-parent education. The main texts and activities of chapters with 'preparing for parenthood' in the title from 12 high-school technology and home economics education textbooks were analyzed with respect to the three pre-parent education goals of developing perceptions and attitudes toward parenthood, learning parenting knowledge and skills, and reinforcing parental capacity. The results were as follows. First, textbook contents and activities reflected the three goals of pre-parent education in a balanced manner. Second, both the contents and activities of textbooks tried to motivate students to perceive parenthood and parenting through reflection on their relationship with their own parents. Third, because the textbooks encouraged students to consider parenthood and parenting, they acknowledged the importance of undertaking pre-parent education to reinforce their parental capacities. Using such textbooks in regular technology and home economics classes is expected to provide students with an opportunity to consider parenthood and shape their perceptions and attitudes accordingly, thereby allowing adolescents to prepare themselves for parenthood and become good parents.

• 한국수자원학회논문집
• /
• 제46권4호
• /
• pp.327-334
• /
• 2013

본 연구에서는 단면수리실험으로 다양한 실험파 조건과 유수실 폭(B)을 변화시키면서 유공부 길이(S)와 반사율의 관계를 검토하여 유공 1실인 유공구조물의 정수면 아래 최적 유공부 길이를 제시하였다. 입사파로 불규칙파를 적용함에 따라 최저 반사계수는 상대 유수실 폭($B/L_s$)이 $B/L_s{\approx}0.15$에서 발생하였다. 유공부 길이와 입사파고와의 관계를 고려한 상대 유공부 길이($S/H_s$)는 $S/H_s{\approx}2.5$에서 최저 반사계수를 보였으며, 이는 정수면 아래 유공부 길이가 입사파고의 약 2.5배일때 최적임을 의미하는 것이다.

• 한국해안·해양공학회논문집
• /
• 제29권6호
• /
• pp.286-304
• /
• 2017

본 연구에서는 어항 등과 같은 소규모 항에서 적용 가능한 격자블록결속에 의한 신형식의 원형유공케이슨을 제안하고, 이러한 방파제의 수리특성을 수치적으로 검토하였다. 본 연구에서 적용한 수치해석 코드는 최근들어 다양한 분야에서 공학적 문제해결을 위해 그 사용예가 급증하고 있는 공중사용허가서(오픈소스 기반) 라이선스 기반의 OpenFOAM(Open Field Operation and Manipulation)에 조파모듈, 투과층 해석모듈, 및 반사파 제어기능 등을 추가한 OLAFOAM을 적용하였다. 본 연구는 먼저, 1) 규칙파 하 3차원슬리트케이슨 방파제에서 파의 파압변동에 대해 기존의 실험 결과와 비교 검토하고, 2) 불규칙파를 조파하여 목표한 파의 재현과 주파수스펙트럼을 비교 검토하여 OLAFOAM의 타당성을 검증하였다. 이로부터 슬리트케이슨과 유사한 원형유공케이슨이 설치된 일정수심의 3차원수치파동수조에 불규칙파를 조파하여 유수실 폭과 유의파고 및 유의주기의 변화에 따른 원형유공케이슨 방파제에서 월파량, 반사율, 파압분포 및 그들의 상호연관성을 면밀히 검토 분석하였다. 이로부터 파압분포는 불투과연직벽체에 대한 Goda 식의 결과보다 매우 작은 결과를 나타내었으며, 반사율은 기존의 슬리트케이슨에서 반사율의 변동범위 내에 존재하는 것을 알 수 있었다.

• 한국기계연구소 소보
• /
• 통권14호
• /
• pp.135-144
• /
• 1985

A method is described to obtain the first order force and second order steady force on the fixed two dimensional submerged or semisubmerged cylinders at infinite depth of water due to regular waves. The first order diffraction wave velocity potential which describes the flow diffracted by a body is obtained numerically using source distribution method on the mean wetted surface. And a technique to remove the irregular frequency phenomena of the source distribution method is also applied. The second order steady force is calculates by means of direct integration of the pressures on the body as derived from the first order velocity potential and is also computed by means of reflection wave height derives from momentum conservation theory. The results are compared with those of published works, and show good agreement.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
• /
• pp.439-442
• /
• 2000

When we measure the acoustical properties of a room using multiple microphone system, it is important to grasp exact time delay of the early reflections from impulse response pair. But it is often very difficult to identify the early reflections in natural shape, because a waveform may be deformed due to the characteristics of a sound source loudspeaker, microphone and reflected wall and overlapping of plural waveform. In this paper to obtain more accurate and enough early reflections, we propose the brand-new five-channel sound receiving system and introduce peak-detecting algorithm. The system has microphones mounted at the origin and four points of a regular tetrahedron. The newly introduced peak-detecting algorithm can show exact peak position in each channel, in spite of deformation due to reflected walls, loudspeaker and microphone.

• 센서학회지
• /
• 제15권5호
• /
• pp.347-351
• /
• 2006

A novel surface plasmon resonance sensor, which can measure 2-dimensional array of immobilized ligands without using imaging devices such as CCD, has been proposed. Regular surface plasmon resonance can be directly used due to the insertion of additional layers with different thickness, on which each ligands are immobilized. Surface plasmon resonance signals are separated depending on the thickness of additional layers. The possibility of multi-sensing capability of the proposed surface plasmon resonance sensor has been verified by the modeling that is based on Fresnel reflection model.

• 대한수학회보
• /
• 제54권1호
• /
• pp.159-175
• /
• 2017

We solve the $Bj{\ddot{o}}rling$ problem for constant mean curvature one surfaces in hyperbolic three-space and in de Sitter three-space. That is, we show that for any regular, analytic (and spacelike in the case of de Sitter three-space) curve ${\gamma}$ and an analytic (timelike in the case of de Sitter three-space) unit vector field N along and orthogonal to ${\gamma}$, there exists a unique (spacelike in the case of de Sitter three-space) surface of constant mean curvature 1 which contains ${\gamma}$ and the unit normal of which on ${\gamma}$ is N. Some of the consequences are the planar reflection principles, and a classification of rotationally invariant CMC 1 surfaces.

• 한국터널지하공간학회 논문집
• /
• 제2권3호
• /
• pp.37-45
• /
• 2000

콘크리트 라이닝, 방수막, 숏크리트 및 공동 등으로 구성된 터널 지보구조는 탄성파 반사법 응용면에서 일종의 박층구조로 간주될 수 있다. 그런데, 각 구성 매질의 경계면 및 물성은 무엇보다 터널 안정성평가를 위한 주요 정보가 되기 때문에 이에 대한 정밀 조사기법의 개발이 크게 요구되고 있는 실정이다. 최근, 국내 외에서 시도된 바 있는 GPR이나 Impact-Echo는 우선 박층에 대한 발생원 파형 길이(파장)면에서도 타당성을 잃게 되어 내부구조 분해능에 대한 상당한 불확실성을 나타내고 있다. 더구나, 현장응용에서 얻게되는 탄성파기록에는 여러 가지 불필요한 탄성파 도달 즉, 큰 진폭의 표면파, S파 반사파 및 변환파는 서로 중첩되어 지배적으로 발달될 것이 기대되기 때문에 이에 대처한 효율적인 측정 및 분석기법 개발이 불가피하다. 탄성파 모형 실험은 바로 상기 복합적인 문제를 구체화하고 또한 그에 따른 기술 개발을 촉진할 수 있는 유용한 기능을 갖고 있다. 따라서, 본 논문에는 터널 지보구조에 대등한 모형을 대상으로 탄성파 반사법 본연의 측정기법(roll-along법) 및 전산처리 과정에 의해 데이터를 취득하고 또한 전산처리 함으로써 주어진 내부구조를 어느 정도까지 재현할 수 있는가를 보여주고 있다. 비록, 측정 데이터에는 유용한 반사파보다는 이미 예상한 바 상기 불필요한 탄성파의 도달이 지배적으로 발달되고 있음이 관찰되었으나 적절한 측정 및 전산처리 과정은 주어진 내부구조에 대한 바람직한 결과를 초래하였다. 이러한 연구결실은 우선 선진국에서도 난제로 되어온 터널 지보구조 규명을 위한 하나의 계기를 마련함은 물론 나아가서 그의 현실화를 위한 기술개발을 가속화할 것으로 사료된다.