• Journal of Wetlands Research
• /
• v.18 no.3
• /
• pp.301-312
• /
• 2016

This study has performed comparative analysis on characteristics of contaminated 35 tributaries on seasonal variation/point discharge load/pollutant distribution of water quality factors(8) in order to understand the effect of the watershed in Nakdong River Basin. As a results, the water quality of $BOD_5$(Biochemical Oxygen Demand), Chl-a(Chlorophyll a) and Fecal E. Coli shows II grade at tributaries of more than 50% without COD(Chemical Oxygen Demand), TP(Total Phosphate), TOC(Total Oxygen Carbon) and TN(Total Nitrogen) factors. The specific discharge(Q) were occupied about 54.4% (19 sites) as $0.05m^3/sec/km^2$ value. Among these results, the contaminant level of Dalseocheon, Hyeonjicheon, Seokkyocheon 1, Uriyeongcheon and Dasancheon was also high, which has to consider a discharged pollutant load(kg/day). The 35 major tributaries of Nakdong River were included in 7 mid-watershed, such as Nakdong Waegwan, Geumho River, Nakdong Goryung, Nakdong Changnyung, Nam River, Nakdong Milyang, Nakdong River Hagueon. Especially, the discharged pollutant load of Nam River and Geumho River also was high according to the amount of discharge such as Kachang dam, Gongsan dam and Nam river dam. Seasonal difference of the water quality factors such as $BOD_5$, TN, SS and Q was observed largely, on the other hand the TP and Chl-a was not. This is guessed due to the precipitation effect of site, biological and physicochemical degradation properties of pollutant and etc. The co-relationship between the seasonal difference and water quality factors was observed using a Pearson correlation coefficients. Besides, the Multiple Regression analysis using a Stepwise Regression method was conducted to understand the effect between seasonal difference and water quality factors/regression equations. As a result, the Multiple Regression analysis was adapted in the spring, summer and autumn without the winter, which was observed high at spring, summer and autumn in the order COD/TP, Chl-a/TOC, TOC/COD/$BOD_5$ water quality factors, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.1
• /
• pp.41-54
• /
• 1986

Methods used for averaging PH's of rainwater and site representation have been studied, Statistical analysis was attempted regarding effects of ionic components on PH's utilizing 847 data altogether obtained in two years, 1984 and 1985. The outcome of the study may be assumarized as follows: 1. Methods for Averaging PH Volume weighted method is considered to be acceptable providing that precipitation is measured at the same time when the samples are taken. Without precipitation data a simple averaging method should be the next choice. 2. Site Representation A statistical method used for optimizing a monitoring newtork was applied using the data collected. Because of a limited number of data, no discernible conclusion can be reached suggesting that the method can serve as a good guide when the data base becomes more reliable. 3. A good correlation appears to exist betwen conductivities and ionic components in rainwater. It would, therefore, be possible to certain extend to estimate ionic concentrations from conductivity measurements by correlation equations. 4. The acidity of rainwater is effected by $SO_4^{2-}, NO_3^-, Cl^- and NH_4^+ with SO_4^{2-}$ being the most significant as demonstrated by standardized regression analysis.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.36 no.5
• /
• pp.177-185
• /
• 2020

The building energy performance indicator, called Energy Performance Index (EPI), has been used for the past decades in South Korea. It has a list of design variables assigned with weighting factors (a, b). Unfortunately, the current EPI method is not performance-based but very close to a prescriptive rating. With this in mind, this study aims to propose a new performance-based EPI method. For this purpose, a global sensitivity analysis method, Sobol, is employed. The Sobol method is suitable for complex nonlinear models and can decompose all the output variance due to every input. The Sobol sensitivity index of each variable is defined as 0 to 1 (0 to 100%), and the sum of all sensitivity indices is equal to 1 (100%). In this study, an office building was modeled using EnergyPlus and then the Latin Hypercube Sampling (LHS) was conducted to generate a surrogate model to EnergyPlus. The sensitivity index was suggested to replace weight (a) in the existing EPI. In addition, the discrete weight (b) in the existing EPI was replaced by a set of continuous regression functions. Due to the introduction of the sensitivity index and the continuous regression functions, the new proposed approach can provide far more accurate outcome than the existing EPI (R²: 0.83 vs. R²: 0.01 for cooling, R²: 0.66 vs. R²: 0.01 for total energy). The new proposed approach proves to be more rational, objective and performance-based than the existing EPI method.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.383-386
• /
• 2001

In this paper, we propose a new personalized information service method using multiple regression analysis for Internet shopping malls. We then apply the proposed method to Internet bookstore, and compare personalized Internet bookstore providing personalized book information with ordinary Internet bookstore providing random book information. Experiment results show that the personalization of Internet bookstore increases satisfaction and purchasing intent of customers.

• Journal of the Korean Society of Safety
• /
• v.16 no.3
• /
• pp.106-110
• /
• 2001

For the policy makers and managers as well as the workers at work, it is important to identify what affects, to what extent, the safety level and costs of work sites. Within this context, the author analyzes fifteen construction work sites of the Incheon International Airport from 1996 to 1999 and shows that the expenditures for safety personnel and education programs contribute to reducing industrial accident costs. In addition, the author demonstrates that the regression analysis out-performs Heinrich method in estimating the accident costs of those work sites.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.2
• /
• pp.1-10
• /
• 2001

The purpose of this study was to investigate factors and variables which have significant effects on landscape satisfaction of urban pedestrian road in Bun-dang new town and to suggest basic information for urban pedestrian road design. These works consist of two phase. First, we tested the Hye-Cheon college students' degree of landscape satisfaction for 37 spots of urban pedestrian road and then selected 10 sports slide by the Sturges' formula. Second, we analysed factors and variables on landscape satisfaction of urban pedestrian road using the semantic differential scale method and then processed using descriptive analysis, factor analysis and multiple linear regression analysis. The major findings of this study can be summarized as follows; 1) The difference of landscape adjectives between the highest score of landscape satisfaction slide and the lowest score landscape satisfaction slide were diversity of vegetation, plenty of the shade of a tree, naturalness and cleanness. 2) Diversity of vegetation, width of road, freedom of danger and diversity of environment can be significant variables of major effects on landscape satisfaction of urban pedestrian road by using the multiple linear regression analysis. 3) Factors covering the landscape satisfaction of urban pedestrian road have been found to be Environment of urban pedestrian road and Constitution of urban pedestrian road. By using the Varimaxs' rotation factor analysis for the number of factors' cumulative percentage has been obtained as 64%. 4) Environment of urban pedestrian road and Constitution of urban pedestrian road can be significant factors of major effects on landscape satisfaction of urban pedestrian road by using the multiple linear regression analysis. In conclusion, the landscape satisfaction factors and variables of urban pedestrian road need to be considered in plan or design the urban pedestrian road.

• Journal of Integrative Natural Science
• /
• v.9 no.2
• /
• pp.144-151
• /
• 2016

The purpose of this study is to investigate the emotion effects on academic achievement for university students. The results are as follows. Resulting on the each emotions difference by the statistical variables, anxiety scores by gender showed a significant difference in the p<.01 level(F=7.685). The males anxiety(2.478, standard deviation: 0.180) had significantly lower scores than females(3.076, standard deviation: 0.168). But fear, anger, activity, and sociability scores were not significantly different respectively between male and female students. To see the emotions effect of academic achievement, the analysis method of the linear regression line was used. As the result, anxiety, fear, anger, activity, and sociability did not significantly influence academic achievement. And so unlike previous methods, the analysis method of the quadratic regression curve was used. As the result, anxiety, fear, anger, activity, and sociability showed did significantly influence academic achievement respectively within 5% of statistical significance level, to more than F=3.06. Therefore, the values on academic achievement of the each anxiety, fear, anger, activity, and sociability showed a quadratic regression curve. That is, [Academic achievement]=$-0.9685{\times}[Anxiety]^2+5.1342{\times}[Anxiety]+8.2679$,[Academic achievement]=$-1.0638{\times}[Fear]^2+5.5694{\times}[Fear]+7.5635$,[Academic achievement]=$-1.3497{\times}[Anger]^2+9.1284{\times}[Anger]+0.6720$,[Academic achievement]=$-1.0589{\times}[Activity]^2+7.4386{\times}[Activity]+1.8272$,[Academic achievement]=$-1.6830{\times}[Sociability]^2+11.2325{\times}[Sociability]-3.8258$. Therefore, we were able to determine the following conclusions. First, we were able to predict the degree of academic achievement by the each emotions scale. Second, when the each emotion scores of students was a moderate, the academic achievement was most excellent. So, in order for the students to become higher academic achievement, the maintenance of medium degree of the each emotions scores is required.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.114-125
• /
• 2002

As semi-solid forging (SSF) is compared with conventional easting such as gravity die-easting and squeeze casting, the product without inner defects can be obtained from semi-solid forming and globular microstructure as well. Generally speaking. SSF consists of reheating, forging, ejecting precesses. In the reheating process, the materials are heated up to the temperature between the solidus and liquidus line at which the materials exists in the form of liquid-solid mixture. The process variables such as reheating time, reheating temperature, reheating holding time, and induction heating power have much effect on the quality of the reheated billets. It is difficult to consider all the variables at the same time when predicting the quality. In this paper, Taguchi method, regression analysis and neural network were applied to analyze the relationship between processing conditions and solid fraction. A356 alloy was used for the present study, and the learning data were extracted by the reheating experiments. Results by neural network were on good agreement with those by experiment. Polynominal regression analysis was formulated by using the test data from neural network. Optimum processing condition was calculated to minimize the grain size, solid fraction standard deviation, otherwise, to maximize the specimen temperature average. In this time, discussion is liven about reheating process of row material and results are presented with regard to accurate process variables for proper solid fraction, specimen temperature and grain size.

• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.202-212
• /
• 2012

Due to the deterioration of water supply network and the deficiency of raw water, the water utility of local governments have performed various projects to improve their revenue water ratio. However, it is very difficult to estimate the cost for maintaining the revenue water ratio at higher level after completing the project, because local governments have different conditions affecting the operating and maintenance cost of water supply network. The purpose of this study is to present a procedure to estimate the operating and maintenance cost required to maintain the target revenue water ratio of the water supply network. For this purpose, we estimated the cost used only for operation and maintenance of water supply network of 164 local governments with the aid of K-Mean Clustering Analysis and the data from 40 representative local governments. Then, the regression analysis was performed to find relationship between revenue water ratio and the operating and maintenance cost with two different data sets generated by two classification methods; the first method classifies the local governments by means of k-means clustering, and the other classifies the local governments according to the index standardized by the operating and maintenance cost per unit length of water mains per revenue water ratio. The results shows that the method based on the index standardized by the cost and revenue water ratio of each government produces more reliable results for finding regression equations between revenue water ratio and the operating and maintenance cost only for water supply network. The estimated regression equations for each group can be used to estimate the cost required to keep the target revenue water ratio of the local government.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.1
• /
• pp.49-54
• /
• 2016

The wind power plants were installed in many places because of the low climate changing effects since 2000. Generally, the wind power plants located in the seaside and the mountainous area and the heights of the windmills are about 40 m~140 m above the ground level. So the noises emitted from the wind power plants propagate far away compared with other environment noise sources like trains and cars noise. Because of these reasons, the noise emitted from the wind power plant is easy to cause the additional social problems like as noise complaints. Under the situation, the ministry of environment has established the guideline to evaluate the environmental effects for the wind power plant. According to the guideline, the noise of the wind power plant has to meet 55 dB(A) at daytime and 45 dB(A) at night in the residential area, which is regulated in the noise and vibration management law. But, it is difficult to estimate the noise emitted from the wind power plant because of the absence of the prediction model of the wind power plant noise. Therefore, the noise prediction model for wind power plants using the regression analysis method is developed in this study. For the development of the model, the sound pressure levels of the wind power plants in Jeju island are measured and the correlations between the sound pressure levels are analyzed. Finally, the prediction equation of the wind power plant noise using by regression analysis method derived. The prediction equation for the wind power plant noise proposed in this study can be useful to evaluate the environmental effects in any wind power plant development district.