• 운동영양학회지
• /
• 제24권1호
• /
• pp.9-13
• /
• 2020

[Purpose] This preliminary study aimed to develop a regression model to estimate the resting metabolic rate (RMR) of young and middle-aged Koreans using various easy-to-measure dependent variables. [Methods] The RMR and the dependent variables for its estimation (e.g. age, height, body mass index, fat-free mass; FFM, fat mass, % body fat, systolic blood pressure, diastolic blood pressure, mean arterial pressure, pulse pressure, and resting heart rate) were measured in 53 young (male n = 18, female n = 16) and middle-aged (male n = 5, female n = 14) healthy adults. Statistical analysis was performed to develop an RMR estimation regression model using the stepwise regression method. [Results] We confirmed that FFM and age were important variables in both the regression models based on the regression coefficients. Mean explanatory power of RMR₁ regression models estimated only by FFM was 66.7% (R²) and 66.0% (adjusted R²), while mean standard errors of estimates (SEE) was 219.85 kcal/day. Additionally, mean explanatory power of RMR₂ regression models developed by FFM and age were 70.0% (R²) and 68.8% (adjusted R²), while the mean SEE was 210.64 kcal/day. There was no significant difference between the measured RMR by the canopy method using a metabolic gas analyzer and the predicted RMR by RMR₁ and RMR₂ equations. [Conclusion] This preliminary study developed a regression model to estimate the RMR of young and middle-age healthy Koreans. The regression model was as follows: RMR₁ = 24.383 × FFM + 634.310, RMR₂ = 23.691 × FFM - 5.745 × age + 852.341.

• 한국전산구조공학회논문집
• /
• 제35권6호
• /
• pp.351-356
• /
• 2022

본 논문에서는 3차원 엮임 재료의 유체투과율 향상을 목적으로 수치해석 데이터 기반의 물성치 회귀 분석 및 최적설계를 소개한다. 우선 3차원 엮임 재료를 구성하는 와이어 사이의 간격을 결정하는 배율 계수를 매개변수화 하여 다양한 배율 조합을 가지는 수치 모델을 생성하였고, 전산 수치해석을 통해 계산된 각 모델의 체적 탄성계수, 열전도 계수, 유체투과율 데이터를 이용하여 다항식 기반의 회귀 분석을 수행하였다. 이를 사용해서 체적 탄성계수와 유체투과율 사이의 다목적함수 최적설계를 통한 파레토 최적해를 도출하였으며, 두 물성치가 서로 상충 관계에 있음을 확인하였다. 한편 3차원 엮임 재료의 열전달 효율을 높이기 위해서 유체투과율을 최대화 시키는 것을 목적으로 경사도 기반 최적설계를 수행하였고, 제약조건인 체적 탄성계수의 크기별 유체투과율의 변화율을 분석하였다. 그 결과 설계자가 원하는 최소한의 강성을 가지는 최대 유체투과율 설계 모델을 얻어낼 수 있음을 확인하였으며, 회귀 방정식을 통해서 얻어진 설계가 높은 정확도를 가지고 있음을 추가적으로 검증하였다.

• 한국수자원학회논문집
• /
• 제34권6호
• /
• pp.627-640
• /
• 2001

일반적으로 합성단위도법은 강우-유출기록이 없는 유역의 설계홍수량 산정을 위해 제안되었다. 그러나 국내에서는 아직까지 자료의 부족 등으로 외국에서 개발된 각종 유출모의 모형이 주로 이용되고 있다. 따라서 그 동안 축적된 국내의 강우-유출 자료를 이용하여 국내의 수문특성엥 적합한 유출모형의 개발이 절실한 상황이다. 이를 위해 본 연구에서는 설마천 유역의 2개 지점과 IHP 대표유역인 평강창, 보청천, 위천의 17개 지점에 대해 그 동안 축 (중략) 특성 관련 연구결과를 종합하여 새로운 합성단위도법을 개발하였다. 개발된 합성단위도는 유역특성인자와 단위도치식 치(첨두시간, 첨두유량)와의 다중회귀분석을 통해 유역면적-유로연장-유로경사의 3가지 변수로 구성되는 효 (중략) 전국을 있었다. 따라서 우리나라에서는 아직까지 수계별로 합성단위도를 분리하여 제시하기는 무리라고 보여지 (중략)

• 응용통계연구
• /
• 제31권2호
• /
• pp.217-228
• /
• 2018

부동산 투기근절, 공평과세 목적으로 부동산 실거래 신고제도가 도입된 이후, 정부에서 운영 중인 부동산거래관리시스템에는 연간 약 200만 건의 부동산 실거래 신고자료가 축적되고 있다. 인터넷이 발달하고 정보에 대한 접근성이 높아진 요즘, 부동산 투자에 대한 관심 증가로 부동산 가격정보에 대한 요구도 나날이 증가하고 있다. 하지만 이는 단순히 거래사례에 대한 정보만을 제공할 뿐이라 공동주택 실거래의 경우 동, 호수, 토지건물 실거래의 경우 지번을 개인정보보호 등의 이유로 공개하고 있지 않아 실거래의 위치별 정확한 데이터를 구득하기 어려운 실정이어서 정보의 비대칭성이 여전히 존재하고 이러한 부동산 정보의 특수성이 부동산시장에서의 투기가 근절되지 않는 이유 중 하나이다. 본 논문에서는 축적된 실거래 신고가격 데이터를 활용하여 실거래 미발생 지점에 대한 시세가격 추정 모형을 도출하는 것으로, 부동산 가격이 지리적 위치에 따라 결정되는 특수성을 가지는 것을 고려하여 공간구조가 반영될 수 있도록 공간회귀 모형을 통한 추정 토지 시세가격의 정확도를 살펴보았다.

• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.677-691
• /
• 2018

Reliability assessment of complex structures using simulation methods is time-consuming. Thus, surrogate models are usually employed to reduce computational cost. AK-MCS is a surrogate-based Active learning method combining Kriging and Monte-Carlo Simulation for structural reliability analysis. This paper proposes three modifications of the AK-MCS method to reduce the number of calls to the performance function. The first modification is related to the definition of an initial Design of Experiments (DoE). In the original AK-MCS method, an initial DoE is created by a random selection of samples among the Monte Carlo population. Therefore, samples in the failure region have fewer chances to be selected, because a small number of samples are usually located in the failure region compared to the safe region. The proposed method in this paper is based on a uniform selection of samples in the predefined domain, so more samples may be selected from the failure region. Another important parameter in the AK-MCS method is the size of the initial DoE. The algorithm may not predict the exact limit state surface with an insufficient number of initial samples. Thus, the second modification of the AK-MCS method is proposed to overcome this problem. The third modification is relevant to the type of regression trend in the AK-MCS method. The original AK-MCS method uses an ordinary Kriging model, so the regression part of Kriging model is an unknown constant value. In this paper, the effect of regression trend in the AK-MCS method is investigated for a benchmark problem, and it is shown that the appropriate choice of regression type could reduce the number of calls to the performance function. A stepwise approach is also presented to select a suitable trend of the Kriging model. The numerical results show the effectiveness of the proposed modifications.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.1-9
• /
• 1993

Since most people spend a large majority of their time indoors (at least in the industrialized countries), indoor air may affect human health more than outdoor air. This study was carried out to characterize the reference and equivalent methods against the low volume method which was promulgated by the Ministry of Health and Social Affairs. The Laser and Piezo air sampler offer the advantage of real time data and low labor costs. The arithmetic mean concentrations were found to be 102.9% (Laser-2 min method) and 65.9% (Piezo method) against low volume method (100%). The statistical analysis procedure for this comparision is linear regression. The linear regression line of low volume method had slopes of 0.5487 and 0.9697 and Y intercepts of 0.0266 and 0.0110 $\mu$g/m$^3$ about Laser (2 min) and (24 h) method respectively. And the correlation coefficients were 0.7271 and 0.9433.

• 상하수도학회지
• /
• 제29권3호
• /
• pp.395-406
• /
• 2015

This research carried out an analysis on input cost and leakage reduction effect by leakage reduction method, focusing on the project for establishing an optimal water pipe network management system in the Taebaek region, which has been executed annually since 2009. Based on the result, optimal cost-benefit analysis models for water distribution network rehabilitation project were developed using DEA(data envelopment analysis) and multiple regression analysis, which have been widely utilized for efficiency analysis in public and other projects. DEA and multiple regression analysis were carried out by applying 4 analytical methods involving different ratios and costs. The result showed that the models involving the analytical methods 2 and 4 were of low significance (which therefore were excluded), and only the models involving the analytical methods 1 and 3 were suitable. From the result it was judged that the leakage management method to be executed with the highest priority for the improvement of revenue water ratio was installation of pressure reduction valve, followed by replacement of water distribution pipe, replacement of water supply pipe, and then leakage detection and repair; and that the execution of leakage management methods in this order would be most economical. In addition, replacement of water meter was also shown to be necessary in case there were a large number of defective water meters.

• Asia-Pacific Journal of Atmospheric Sciences
• /
• 제54권4호
• /
• pp.611-622
• /
• 2018

Observed climate data are processed under the assumption that their time series are stationary, as in multi-step temperature and precipitation prediction, which usually leads to low prediction accuracy. If a climate system model is based on a single prediction model, the prediction results contain significant uncertainty. In order to overcome this drawback, this study uses a method that integrates ensemble prediction and a stepwise regression model based on a mean-valued generation function. In addition, it utilizes empirical mode decomposition (EMD), which is a new method of handling time series. First, a non-stationary time series is decomposed into a series of intrinsic mode functions (IMFs), which are stationary and multi-scale. Then, a different prediction model is constructed for each component of the IMF using numerical ensemble prediction combined with stepwise regression analysis. Finally, the results are fit to a linear regression model, and a short-term climate prediction system is established using the Visual Studio development platform. The model is validated using temperature data from February 1957 to 2005 from 88 weather stations in Guangxi, China. The results show that compared to single-model prediction methods, the EMD and ensemble prediction model is more effective for forecasting climate change and abrupt climate shifts when using historical data for multi-step prediction.

• 대한공간정보학회지
• /
• 제19권3호
• /
• pp.33-40
• /
• 2011

본 연구에서는 제주지역의 산사태가능성을 분석하기 위하여 사람의 발길이 많은 사라봉, 별도봉 지역과 송악산 지역의 지형 및 토질공학적 사면 붕괴 유발 인자들을 이용하여 로지스틱회귀분석기법과 인공신경망기법을 GIS기법과 결합하여 예측지도를 작성하고 비교분석하였다. 산사태 예측지도를 작성하기 위해서 산사태 발생에 영향을 주는 사면경사, 고도, 건조밀도, 투수계수, 간극율을 선택하였으며 선정된 지역을 대상으로 실시한 야외조사와 토양물성시험 결과를 정리한 후 이를 토대로 GIS기법을 적용하여 각 레이어별 주제도를 작성하였다. 생성된 주제도를 각각 로지스틱회귀분석기법과 인공신경망기법으로 작성하여 비교분석한 결과 사면경사와 간극율의 경중률이 가장 높게 나타났고, 예측지도는 로지스틱회귀분석기법이 더욱 정확한 결과를 나타내었으며, 도로변과 산책로를 중심으로 산사태 발생가능성이 높게 분포하고 있음을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.61-69
• /
• 2020

The uniaxial compressive strength (UCS) of rock is a basic parameter in underground engineering design. The disadvantages of this commonly employed laboratory testing method are untimely testing, difficulty in performing core testing of broken rock mass and long and complicated onsite testing processes. Therefore, the development of a fast and simple in situ rock UCS testing method for field use is urgent. In this study, a multi-function digital rock drilling and testing system and a digital core bit dedicated to the system are independently developed and employed in digital drilling tests on rock specimens with different strengths. The energy analysis is performed during rock cutting to estimate the energy consumed by the drill bit to remove a unit volume of rock. Two quantitative relationship models of energy analysis-based core drilling parameters (ECD) and rock UCS (ECD-UCS models) are established in this manuscript by the methods of regression analysis and support vector machine (SVM). The predictive abilities of the two models are comparatively analysed. The results show that the mean value of relative difference between the predicted rock UCS values and the UCS values measured by the laboratory uniaxial compression test in the prediction set are 3.76 MPa and 4.30 MPa, respectively, and the standard deviations are 2.08 MPa and 4.14 MPa, respectively. The regression analysis-based ECD-UCS model has a more stable predictive ability. The energy analysis-based rock drilling method for the prediction of UCS is proposed. This method realized the quick and convenient in situ test of rock UCS.