• 환경정책연구
• /
• 제14권3호
• /
• pp.3-19
• /
• 2015

지자체 단위의 도로이동오염원 배출량을 보다 현실적으로 산정하기 위하여 배출량 산정 시 기초자료인 차량 등록대수를 보정하는 방안을 검토하였다. 국가교통DB를 이용하여 수도권 지역의 특정 차종(RV, 승합차, 버스, 화물차)에 대한 차량 등록대수를 보정한 결과, 지역별로는 서울의 오차율이 가장 크고 차종별로는 버스와 화물차의 오차율이 큰 것으로 나타났다. 또한, 배출량 산정에 영향을 미치는 기존 등록대수와 보정 등록대수 편차의 절대값은 수도권 지자체 모두 화물차가 가장 큰 것으로 나타났다. 배출량 산정 결과, 기존 등록대수 기반의 배출량과 보정 등록대수 기반의 배출량의 차이는 약 9%로 나타났으며, 수도권 지자체 중에서는 인천의 배출량 오차율이 가장 큰 것으로 나타났다.

• 자원리싸이클링
• /
• 제10권3호
• /
• pp.3-13
• /
• 2001

The Korean Auto industry has developed remarkably over the past 30 years. In 2000 alone, Korea produced 3.11 million vehicles, and the number of vehicles registered surpassed the ten million mark. As the number of vehicles registered in Korea has increased, yew after you, a rising number of cars have been scrapped. In 2000, a total of 455,592 automobiles were scrapped, up dramatically from only 101,158 in 1989. The system for handling of ELV(End-of-Life Vehicles) in Korea is governed by the "Motor Vehicle Control Act". The Act places the responsibility for vehicle scrapping directly on the vehicle owners. h vehicle owner can only can eel a vehicle registration after he gets a certificate from an authorized vehicle dismantler showing that his vehicle was properly scrapped according to the law. The take-back rate of ELV reaches nearly 100% in Korea. The vehicle scrapping process in Korea is very similar to those in other countries. fluids such as fuels and oils are first removed, and recyclable parts are collected and separated. Engines and transmissions are dismantled and recycled for use as raw material. Plastics, which are not easily reused, are generally treated as industrial wastes. The "Motor Vehicle Control Act" prohibits reuse of certain parts in order to guarantee the safety of the used auto parts. However, some restrictions on the reuse of auto parts have recently been eased to promote recycling. In this paper, additionally, car recycling policy of the foreign countries such as Japan, Germany and EU were reviewed.

• 한국환경과학회지
• /
• 제26권1호
• /
• pp.55-65
• /
• 2017

Average concentration of PM in Seoul metropolitan area satisfied the Korean air quality standard in 2010. Furthermore, concentration of PM in all boroughs across Seoul met the air environment standard in 2012. $PM_{10}$ concentration was relatively higher in center of Seoul in comparison to the rest, while $PM_{2.5}$ concentration showed exactly the contrary result. We analyzed the effect that PM emissions from vehicles would have on PM concentrations across Seoul. The results showed that average annual PM concentration recently decreased in Seoul although the number of vehicles registered annually continued its upward trend. By contrast, average fine dust concentrations in Seoul showed a decline which suggested that correlation between annual average PM concentrations and number of registered vehicles remained low. However, year-on-year vehicle registration rate recently showed a declining tendency in the same way as the trend of changes in average PM concentrations. Particularly, the upward trend in annual average PM concentrations in 2002 and 2007 was consistent with the increase in vehicle registration rate, suggesting that vehicle registration rate was closely associated with changes in PM concentrations.

• 한국인공지능학회지
• /
• 제9권2호
• /
• pp.29-34
• /
• 2021

In this paper, for efficient parking control, in an Arduino environment, an intelligent parking control prototype was implemented to provide parking control and parking guidance information using HC-SR2O4 and RC522. The main elements of intelligent parking control are vehicle recognition sensors, parking control facilities, and integrated operating software. Whether the vehicle is parked on the parking surface may be confirmed through sensor or intelligent camera image analysis. Parking control equipment products include parking guidance and parking available display devices, vehicle number recognition cameras, and intelligent parking assistance systems. This paper applies and implements ultrasonic sensors and RFID concepts based on Arduino, recognizes registered vehicles, and displays empty spaces. When a vehicle enters a parking space to handle this function, the automatic parking management system distinguishes the registered vehicle from the external vehicle through the RC522 sensor. In addition, after checking whether the parking slot is empty, the HC-SR204 sensor is displayed through the LED so that the driver can visually check it. RFID is designed to check the parking status of the server in real time and provide the driver with optimal route service to the parking slot.

• 한국IT서비스학회지
• /
• 제22권3호
• /
• pp.85-100
• /
• 2023

The development of Airside Vehicle Control System(AVCS) at Gimpo Airport aims to reduce ground safety accidents in movement area and improve airport operation efficiency and safety management service quality. The vehicle is controlled by a brake controller RTK-antenna and On-Board Diagonostics(OBD) module. Location data is transmitted to a nearby communication base station through a Wi-Fi router and the base station is connected to the AVCS by an optical cable to transmit location data from each vehicle. The vehicle position is precisely corrected to display information using the system. The system allows airport operators to view registered information on aircraft and vehicles and monitor their locations speeds and directions in real time. When a vehicle approaches a dangerous area alarm warnings and remote brake control are possible to prevent accidents caused by carelessness of the driver in advance.

• 에너지공학
• /
• 제19권1호
• /
• pp.39-50
• /
• 2010

하이브리드 전기자동차(HEV: Hybrid Electric Vehicle)와 플러그 인 하이브리드 전기자동차 (PHEV: Plug-in Hybrid Electric Vehicle)는 화석연료 배출가스를 제거하고 연료경제성을 개선하기 위하여 급속한 속도로 전통적 가솔린 엔진 자동차를 대체할 것이다. 이 리뷰는 병렬 하이브리드 전기자동차를 위한 퍼지로직 제어전략과 최적화를 설명하였다. HEV와 PHEV를 위한 전기모터와 리튬이온 배터리의 최근 발전을 기술하였으며 국제적 학술지에 출판된 논문수와 등록된 특허 수에 근거한 한국의 HEV와 PHEV 기술의 경쟁력 분석도 수행하였다.

• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.13-19
• /
• 2012

The fatalities rate for passenger vehicles, vans, and commercial vehicles is 1.23, 1.90 and 2.46 deaths per 10,000 registered vehicles, respectively. This shows that vans and commercial vehicles are vulnerable compare to passenger vehicles. To evaluate the crashworthiness of van and Light Truck Vehicle(LTV), we carried out frontal offset crash test at 64km/h, 40% overlap as per IIHS(Insurance Institute for Highway Safety). The test result show that LTV is very poor to protect occupant at frontal crash cause there is no safety system such as airbag and pretensioner and front end length(distance from front bumper to steering wheel) is short. One of the van rated as the lowest rating even it is equipped with airbag, cause its safety cage was collapsed during the test. This result shows that the structural integrity is very important in terms of occupant protection.

• 농촌계획
• /
• 제23권1호
• /
• pp.21-29
• /
• 2017

The purpose of this study is to analyze the accuracy of cultivated crop database in agricultural farm business using UAV(Unmanned Aerial Vehicle) and field survey over Daesso-myeon, Umsung-gun, Chungbuk. When comparing with agricultural farm business and cadastral maps, Daeso-myeon crop field shows 29.8%(2,030 parcels out of 6,822 parcels) is either mismatched or missing. It covers almost 19.3%($3.4km^2$ of $17.6km^2$) of total farmland. In order to solve these problems, it is necessary to prepare a multifaceted plan including cadastral map. Comparative analysis of the cultivated crop registered in the agricultural farm business and the field survey agreed only in 3,622 parcels in total 6,822 parcels whereas 3200 parcels disagree. Among these disagreed parcels 2,030(29.8%) have been confirmed as unregistered farm business entity. Accuracy of cultivated crop registered in agricultural farm business agreed in 75.6% cases. Especially the paddy field registration is more accurate that other crops. These discrepancies can lead to false payment in agricultural farm business. For exploration and analysis of regional resources, UAV images can be used together with farm business management database and cadastral map to get a clearer grasp over on-site resources and conditions.

• 한국전자통신학회논문지
• /
• 제18권3호
• /
• pp.433-440
• /
• 2023

반사경이 차량에 의해 충돌되는 경우나 폭풍 등으로 돌아가는 경우, 충격 센서에 의해 이벤트가 뜨고 트리거가 작동된다. 본 논문의 트리거 처리 알고리즘은 자이로 센서의 X, Y, Z값을 등록된 값과 비교하여 3축 구동 모터의 작동에 의해 원래의 값으로 구동되도록 제안한다. 그리고 차량번호판을 인식해서 도난이나 사회적인 문제가 되는 차량이면 경찰 작전망에 정보제공 처리한다. 반사경이 도난이나 위치 이동이 발생하는 경우, 등록된 GPS값을 가지고 있기 때문에 도난 모니터링 기능을 작동하여 처리할 수 있도록 한다.

• 한국멀티미디어학회논문지
• /
• 제23권4호
• /
• pp.517-524
• /
• 2020

Recently, many researches have been conducted to automatically recognize license plates of vehicles and use the analyzed information to manage stolen vehicles and track the vehicle. However, such a system must eventually be investigated by people through direct monitoring. Therefore, in this paper, the system of tracking a vehicle is implemented by sharing the information analyzed by the vehicle image among cameras registered in the IoT environment to minimize the human intervention. The distance between cameras is indicated by the node and the weight value of the weighted-graph, and the eigenvector centrality is used to select the camera to search. It demonstrates efficiency by comparing the time between analyzing data using weighted graph searching algorithm and analyzing all data stored in databse. Finally, the path of the vehicle is indicated on the map using parsed json data.