• 한국추진공학회지
• /
• 제10권2호
• /
• pp.46-52
• /
• 2006

현재까지 적용되고 있는 추력제어 장치로는 크게 노즐의 확대부에 장착되어 화염의 방향을 조종하는 제트베인(jet vane), 제트탭(jet tab)방식과 노즐자체를 회전하는 방식인 볼/소켓형(ball & socket) 노즐, 플렉시블 씰형 (flexible seal)노즐로 구분된다. 본 연구는 노즐자체를 회전하여 추력방향을 제어하는 볼/소켓형(ball & socket) 노즐이 회전할 경우 발생되는 유입부의 비대칭성이 노즐 성능에 미치는 영향을 예측하기 위하여 수행한 3차원 수치해석결과와 공압시험 결과를 수록하였다. 유동해석 결과 유입부의 비대칭성이 유동에 미치는 영향은 노즐 목을 지나면서 현저히 줄어들고 하류 유동에 미치는 영향이 미비하였으며 해석된 주 추력의 크기는 시험에서 측정된 추력과 비슷한 경향을 나타내었으나 측 추력의 경우 시험 값보다 낮게 나타났다. 또한 시험의 결과 기하학적으로 회전된 회전각에 의한 추력방향과 측정된 추력의 방향이 일치하지 않음을 알 수 있었다.

• 대한치과교정학회지
• /
• 제21권3호
• /
• pp.603-614
• /
• 1991

To study the possibility of attraction magnetic forces to expand maxillary arch, we used 2 big adult dogs, 2 small puppies, 1 small adult dog as experiments, and 1 small adult dog as a control. We measured the intercanine width and intermolar width and histologically observed in the suture and cervical and apex region of teeth and took occlusal X-rays to observe separation of suture line in the maxilla. The results were as follows: 1. Expansion velocities of intercanine (0.25mm/day) and intermolar widths (0.23mm/day) in puppies were faster than those (0.135mm/day, 0.09mm/day) in adults. 2. In all experiments in adults (0.135mm/day) and puppies (0.25mm/day), expansion velocity of intercanine widths were faster than those (0.09mm/day, 0.23mm/day) of intermolar width. 3. In all experiments ectatic changes were observed and cellularities of fibroblast increased in the suture line. Only in adults dogs the separations of palatal suture were observed in the occlusal X-ray view. 4. In the puppies bony deposition was particularly observed in the suture line and micro-bony fragments were often observed. 5. In the all experiments no root resorption was observed in the cervical and root area, but normal root resorption due to eruption of permanent teeth was observed in the puppies.

• 대한소아치과학회지
• /
• 제24권4호
• /
• pp.795-804
• /
• 1997

Developmental dental morphological anomalies are fusion, gemination, twinning, concrescence and etc. They may cause many problems in conservative, periodontal and esthetic aspects. Fusion is a condition where two separate tooth buds unite at some stage in their development to form a bifid crown. If tooth contact occurs early, at least before the start of calcification, the two teeth may be completely unites to form a single large tooth. If tooth contact occurs after the time when a portion of the tooth crown has completed its formation, there may be union of the roots only. In fusion the dentin is always confluent. Fusion teeth is more common in the deciduous than in the permanent dentition. Fused teeth are relatively rare, and are mostly mandibular anterior teeth. Fusion of normal and supernumerary teeth or between normal teeth may occurs. The exact etiology factor of fusion is unknown, but genetic and environmental factors seems to be related. A variety of complications and subsequent treatments have been suggested on this teeth. Periodontal conditions may arise due to a groove formed at the line of fusion of the two teeth. Crowding or Protrusion with potential for malocclusion or delayed eruption of adjacent teeth. Fusion teeth appear in the anterior region, they usually cause esthetic problems. Treatments vary depending on the problem, the location, and the extent of fusion. Treatment of fused teeth has been reported from endodontic, orthodontic, periodontic, surgical and multidisciplinary. This report presents the esthetic improvements by separation of two clinical crowns. Bone reduction or endodontic treatments are not required.

• 한국수소및신에너지학회논문집
• /
• 제25권1호
• /
• pp.59-71
• /
• 2014

An experimental study has been conducted to investigate the heat transfer characteristics of laminar syngas/air mixture with 10% hydrogen content impinging normally to a flat plate of cylinder. Effects of impinging distance, Reynolds number and equivalence ratio as major parameters on heat fluxes of stagnation point and radial direction were examined experimentally by the direct photos and data acquisitions from heat flux sensor. In this work, we could find the incurved flame behavior of line shaped inner top-flame in very closed distance between flat plate and burner exit, which has been not reported from general gas-fuels. There were 3 times of maximum and 2 times minimum heat flux of stagnation point with respect to the impinging distance for the investigation of Reynolds number and equivalence ratio effect. It was confirmed that the maximum heat flux of stagnation point in 1'st and 2'nd peaks increased with the increase of the Reynolds number due to the Nusselt number increment. There was a third maximum rise in the heat flux of stagnation point for larger separation distances and this phenomenon was different each for laminar and turbulent condition. The heat transfer characteristics between the stagnation and wall jet region in radial heat flux profiles was investigated by the averaged heat flux value. It has been observed that the values of averaged heat flux traced well with the characteristics of major parameters and the decreasing of averaged heat flux was coincided with the decreasing trend of adiabatic temperature in spite of the same flow condition, especially for impinging distance and equivalence ratio effects.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.545-545
• /
• 2008

Poly-Si is an essential material for floating gate in NAND Flash memory. To fabricate this material within region of floating gate, chemical mechanical polishing (CMP) is commonly used process for manufacturing NAND flash memory. We use colloidal silica abrasive with alkaline agent, polymeric additive and organic surfactant to obtain high Poly-Si to SiO2 film selectivity and reduce surface defect in Poly-Si CMP. We already studied about the effects of alkaline agent and polymeric additive. But the effect of organic surfactant in Poly-Si CMP is not clearly defined. So we will examine the function of organic surfactant in Poly-Si CMP with concentration separation test. We expect that surface roughness will be improved with the addition of organic surfactant as the case of wafering CMP. Poly-Si wafer are deposited by low pressure chemical vapor deposition (LPCVD) and oxide film are prepared by the method of plasma-enhanced tetra ethyl ortho silicate (PETEOS). The polishing test will be performed by a Strasbaugh 6EC polisher with an IC1000/Suba IV stacked pad and the pad will be conditioned by ex situ diamond disk. And the thickness difference of wafer between before and after polishing test will be measured by Ellipsometer and Nanospec. The roughness of Poly-Si film will be analyzed by atomic force microscope.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1182-1190
• /
• 2014

$Cd_{1-x}Zn_xS$-sensitized $K_4Nb_6O_{17}$ composite photocatalysts (designated $Cd_{1-x}Zn_xS/K_4Nb_6O_{17}$) were prepared via a simple deposition-precipitation method. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDS), $N_2$ sorption, ultraviolet-visible light diffuse reflectance spectroscopy (UV-Vis DRS), photoluminescence measurements (PL), and X-ray photoelectron spectroscopy (XPS). The $Cd_{0.8}Zn_{0.2}S$ particles were scattered on the surface of $K_4Nb_6O_{17}$, and had a relatively uniform size distribution around 50 nm. The absorption edge of $K_4Nb_6O_{17}$ was shifted to the visible light region and the recombination of photo-generated electrons and holes suppressed after $Cd_{0.8}Zn_{0.2}S$ loading. The $Cd_{0.8}Zn_{0.2}S$(25 wt %)/$K_4Nb_6O_{17}$ composite possessed the highest photocatalytic activity for hydrogen production under visible light irradiation, evolving 8.278 mmol/g in 3 h. Recyclability tests were performed, and the composite photocatalysts were found to be fairly stable. The mechanism of charge separation between the photogenerated electrons and holes at the $Cd_{0.8}Zn_{0.2}S/K_4Nb_6O_{17}$ composite was discussed.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.489-494
• /
• 2013

An improved method for the preparation of monomethine cyanine dyes with quinoline nucleus by one-pot three-component using 1-methyl-2-quinolinethione, quaternized 2- or 4-methylheterocyclic compounds and methyl p-toluenesulfonate as starting materials was described. Compared with the traditional methods, the new synthetic method reduced the reaction steps, shortened the reaction time, avoided the separation and purification of the intermediate and reduced cost. The dyes absorbed in the region 478.0-563.0 nm and had molar extinction coefficients of $1.3{\times}10^4-9.4 {\times}10^4L\;mol^{-1}\;cm^{-1}$. Their fluorescence maxima and Stokes shifts were in the range of 525.2-594.4 nm and 16.2-80.6 nm in different solvents, respectively. From the spectral properties of the dyes in different solvents, it could be found that the ${\lambda}_{max}$ of the dyes were shorter in protonic solvents, and showed hypsochromic shifts with the increase of polarity of the solvents.

• 한국전산구조공학회논문집
• /
• 제26권5호
• /
• pp.393-399
• /
• 2013

본 논문은 그래핀의 모드 I 균열 진전에 대한 분자동역학 해석과 수치보조장을 사용하는 영역 투영 방법의 역문제 해석 방법을 결합하여 균열 선단 응집 법칙을 평가하는 효율적인 방법을 제시하고 있다. 그래핀의 균열 선단 응집 법칙을 결정하는 것은 균열 선단에서 멀리 떨어진 영역의 변위를 사용하여 균열 면에서 미지의 응집 트랙션과 열림 변위를 구하는 역문제를 해석해야 하는데 상호 J-적분과 M-적분의 경로 보존성과 효율적인 수치보조장을 사용하는 방법을 적용하였다. 분자동역학 해석에서 원자 변위를 유한요소 절점 변위로 이동최소자승법을 사용하여 근사하였으며 안정적인 역문제 해석을 통하여 원자 단위의 거동을 연속체 해석으로 연결시킬 수 있는 새로운 방법을 보여주었다.

• 한국항공우주학회지
• /
• 제31권7호
• /
• pp.32-40
• /
• 2003

공탄성 플랩을 이용한 충격파와 난류 경계층의 간섭유동 제어에서 유동가시화에 관한 실험적 연구가 수행되었다. 유동 가시화를 위하여 순간 쉐도우 영상, 등유와 흑색안료 혼합물을 이용한 유맥선, 간섭 유동 후방에 적용된 실리콘 오일막의 간섭 줄무늬 형상 등이 얻어졌다. 플랩의 형상과 두께 변화에 의한 영향이 평가되었고 그 결과는 제어되지 않은 일반 평판 위의 충격파 간섭유동의 경우와 비교되었다. 충격파 간섭유동 후방에 적용된 얇은 오일막 표면에 나타나는 간섭무늬로서 이 영역에서의 정성적인 전단응력분포 관찰이 이루어 졌고, 그 결과 간섭유동 후방 중심축 근처에 길고 좁은 박리현상을 동반한 유동의 강한 폭 방향 변화가 관찰되었으며, 이는 이러한 충격파 간섭유동의 강한 3차원 특성을 보여주고 있다. 또한 플랩 하부에 위치한 공동부 형상이 충격파 간섭유동에 미치는 영향도 평가되었고, 그 영향을 무시할 수 없음이 관찰되었다.

• 한국항공우주학회지
• /
• 제37권10호
• /
• pp.967-974
• /
• 2009

임펄스식 극초음속 충격파 풍동과 동축열전대, 불어내기식 극초음속 풍동과 온도감응페인트(TSP)를 이용하여 돌출물 전면 및 주위에서의 온도 및 열유속 계측 실험을 수행하였다. 측정된 실험 결과를 기 수행된 불어내기식 풍동과 열유속 게이지를 이용한 열유속 측정 결과와 비교하였다. 각각의 세 가지 기법의 결과가 서로 잘 일치함을 확인하였으며, 실험 결과로부터 돌출물 전면에서의 열전달 특성을 보다 명확하게 관찰할 수 있었다. 측정된 열유속 데이터로부터 공력가열 현상은 돌출물 전면 상부에서 크게 발생하며 돌출물의 크기가 작을수록 매우 미비해짐을 관찰할 수 있다. 돌출물의 크기가 큰 경우, 돌출물 높이 0.6~0.7 지점부터 열유속이 크게 증가한 반면, 돌출물의 높이가 충분히 작은 경우는 돌출물 자체가 전방의 박리 영역에 완전히 잠기면서 열유속이 크게 증가하는 지점이 관찰되지 않았다.